Ok I have a problem I assume it has to do with fuel or my fuel pump relay not sure heres my problem.1-when I turn on the car it starts up really rough and if I give it gas; it turns off this only happens sometimes not all the time when its cold.2- sometimes my walbro 255 does not do the...

Well here is my problem:ohdamn: my car turns of when i come to a complete stop or when i let it idle for a while it dies the rpms are about 900 and my vacuum at 11-13 at idle then once in a while when i let it idle the rpms go up to about 1300 then thay drop fast to like 700 and its does that...

ok Well I did a compression test on my car and these where the numbers 60 150 150 150. I have 8 to something pistons and eagle rods Stock valves and springs the headgasket its some what new around 5k :( well my question is. Is it a Piston Ring A burned valve a BHG or what. If its a ring is there...

I just had i question I wanted to know if anything bad would happen if i block off the line comming out of the valve cover that conects with the Intake? I know people put oil catch cans but would it be safe to block it his a picture of the line im talking about im not talking about the PCVvalve.

ok well I bought a SPEC 2+ and I dropped in a 2004 sohc Dodge neon trany. I am just curious has anyone gotten clutch shatter? because when ever I put it on first it sounds and feels like rattling noise when i let the clutch go and it only does it on first gear is that normal? or could it be the...

I just have a question If i was to get a dodge neon 1995 flywheel and the get a clutch from ACT and then a pressure plate from another car or can i use the stock NEON pressure PLATE will it all work im trying to go the cheap route but make my own Frankensteinthese are the clutch disks im...

I just have a question If i was to get a dodge neon 1995 flywheel and the get a clutch from ACT and then a pressure plate from another car or can i use the stock NEON pressure PLATE will it all work im trying to go the cheap route but make my own Frankensteinthese are the clutch disks im...

well I did some searching and I found out that I can drop in a dodge neon transmission. on to my 1997 eclipse nt. only thing I would have to do is change the bell housing from the eclipse to the neon trany.my questions are:what year does the dodge neon have to be? SOHC or DOHC?which...

Ok this is the problem :banghead: I barely got the car running cherry then this happens. I going 38 and i stepped on it on 2nd gears and then i let off the gas and my car turned off.:aha: so then I thought it was maybe a wire,timing belt snapped,etc and i found nothing so i called a tow...

I Finally got me a SFMU vortech one question the SFMU is super big compared to my FMU is right?Also how do i hook up a gauge to the SFMU?Im planing to run 450cc i have the wideban and I have all thats needed I already know how to install it i just need to know what my reading should...

Ok this is my problem I had 310 injectors with the resistor pack and it ran good for like a month. know it started idle searching. In any gear when coming to a stop I am about 1500 or close to 1 and i push on the clutch and put it on neutral it goes all the way down close to almost turning off...

So Im thinking if buying this MegaSquirt Version 1 processor, 3.0 Board, 3 Bar map. I really dont know about MS but is this good. im planing on putting 450cc if i was to get this would i still have to buy a SFMU?any info on this will help:confused:

OK I finally got me a SFMU and I a WIDEBAN:hellyeah: I have 310cc on my car right know and I am running 10 but the wideban says im running at IDLE im at 14.9 to 15 and at full boost im at 16-17 which i believe its LEAN. I want to push 15 to 17 pounds I just want to know what kind of injectors...

I i been searching and i found out that i can use ATF+4 Fluid from the dealer from a 2003 dodge neon also i found out that i can use NVT350 and other what i want to know what other oils BESIDES the Dealer can I use? I heard i can use any 85W 90 is that right ?

I just want to know if i Can use the STOCK flywheel on my 420a with a sachs stage 2 power clutch? the guy told me it came with a flywheel but thet WTF did not send it to me :banghead:

Well i think I got scammed. But I want to make the better of it. I bought this act clutch fr 250 from a guy that was selling it on ebay. he said it was for a 1995-1999 420a so i got it then i had a friend tried to put it on and he said it wasnt for my car. :banghead: so then im like WTF so i...

well i been doing some research but this is my question my o2 sensor has 4 wires and my air fuel gauge has 3. the o2 sensor has 2 white wires one gray and one black. the A/F gauge has one RED one GRAY and one BLACK. well I tried installing it but i cant it to work. I got 1 of the white wires...

I just wanted to know if i can trick the ECU into think my EGR is working so i wont get the CODE since i have the EGR block off plates. and for the evap well i took it off so i just want to know if i can trick it as well so i wont get the code also? can it be done?

whats the base timing for a 420a? is it 10 degrees? i just want to know before i take it to go get it checked to see if my timing if off........................................ANY ONE OUT THERE ok 25 people have viewed this tread and no one knows what the base timing should be???

OK here it is I got a check engine code on my 97 eclipse the code number was a 14 which is the map sensor.I though it could either be the map sensor its self or connection or maybe even the missing link.So i changed the map sensor and clip and missing link with the one my friend had in...

i drove for a while and sometimes my car turned off i dint know why my idle sounds lumpy and it smells different than back then but i dont know if its normal thats it turns off when it comes to a stop. i just adjusted the throttle body cable so it can be a little open and know it does not turn...

I need serious help. Well i was taking off the crank pulley i saw here on dsm tuners someone said to put a 1/4 or i think it was a 1/2 socket with a 6 inch extension into the crank and then use a 3 jaw puller so it can have something to push against it well it works to get the pulley off but the...

I was just wondering if anything will happen if I take off the pcv valve and on the valve cover i put a breather and on the intake manifold i just tap it off. The reason why i am trying to do this is because on the side of my valve cover where i recently have a breather it leaks alot of oil and...

well i found this guy at the races and hes selling me crower camshafts the pair my question is how can u identify if there crower or not? also i saw this number on the box 64462-2 are these good i did some research and they run for 480 and there stage 2 and the guy is selling them to me for 250...

well my friends car is a 99 420a turbo and i did a compression test ### it was trowing to much blue smoke from the exhaust and i though 1st the turbo might of had some broken seals but it brand new so we decided to do a compression test and these where the numbers1 cylinder = 80 2...

I just had a question will i be able to put this roll cage since its cheap as hell on my 2g 97 eclipse or wil it not work? i search for 2g roll cages but i dont want to get riped off since sometimes they dont even send the things you order on some sites and at least with even i am using pay pal...

I was thinking of buying these tires but i dont know if these will fit on to my 97 eclipse there 5 lug also but i just want to know if the holes will match up check them out eBay Motors: two P275/60 R15 Tires on 15X8 chevy 5 Lug Ralley Rims (item 380068470206 end time Oct-29-08 00:37:17 PDT)

I got some injectors from my school and I don't know if there low impedance of high impedance. In the bag that they where inside they said 290cc injectors i searched on Google and cant find nothing i don't even know if there 290cc and i don't wont to put them on without knowing these are the...

Well this is my problem, I know you guys are going to say to research and everything but this is it, i am trying to wire the harness from my 97 eclipse with a resistor pack so i can run the 450cc injectors from a 1g turbo eclipse since there low impedence. i have posted lots of threads to see if...

i was wondering what kind of other injectors i can use other than the stock ones and 1g eclipses. I would rather have some that are just plug and go/play. I heard that i can use (1996+?) Mustangs. but are they the gt models of none gt? I just want to know which ones are good so i can go check...

I was also just wondering if I can use the Stock headers and cut the flange and put a t3 t4 flange on that? will that work fine?:confused: and if so what type of t3 t4 flange should i buy since they sell a lot on them on ebay but they are different kinds of metals????anyone

Well i have a 420a turbo with 450cc injectors and alot of stuff. The thing is that I got pulled over for Invading A PIG OFFICER. I got locked up for 16 hours:beatentodeath: well enough about me. well since i got to go to the state ref to get my car checked i had to take all my parts out and make...

Well i managed to put the injectors and the resistor pack. Then when i 1st started up the car the car had a loud ticking noise but after I let it idle it seemed fine. So I went for a spin since everything seem to be normal as before. While I was driving for a while I my car would hesitate when...

I have a 420a turbo and i am trying to get some fuel injectors and since i am in a money crisis i am trying to get some from other cars if i can. I wanted to know if i can get injectors from a 4g63 and put them on my car or what other cars can i get them from i know i am going to have to some...

well this is my problem. Well I took off the AC out of my 97 eclipse because it was doing a weird noise kinda like a duck or something like that. every time I just to tap the gas a little bit. once I stepped on it a little it stooped. so then it got on my nerves so i took of everything and it...

<a href="http://allyoucanupload.webshots.com/v/2001302467169229592"><img border="0" src="http://aycu11.webshots.com/image/41010/2001302467169229592_rs.jpg" alt="Free Image Hosting at allyoucanupload.com"/></a> Im trying to find these any one know a site where i can get these at:confused:

"I have a 420a 97 eclipse"I was just wondering what kind of exhaust manifold should I buy. I was thinking of getting the obx 420a manifold but it looks kinda of funny ### they piping dont look even my bro was telling me that they should be even to get good hp but i wanted some advice i dont want...

well i am trying to take the head off my car i removed most of the part i just need to take off the cam gears so i cam remove the cam shaft and the bolts and hopefully take off the head but i cant get the cam gears to pop out i tried holding the cam shaft but didnt work then tried to put a...

Well I got tired of waiting on the guy to fix my car and I decided to open it to check out the timing belt and this is what i found the tensior bolt had broken dont know why but i will get one soon also i dont know if a part fell off the crank here is a pick. They told me that that should not...

....

Hey I got a 420a turbo with I have a heating problem. At 1st i thought it was my Temperature sensor so i bought a new one and it wasnt that. Then i thought it was my fan and then it wasnt that then i put new anti freeze and no so my question is can it be my radiator "i have no leaks" and also i...

I just wanted a good estimate of how much people charge for boring the block because some guy is trying to charge me 400 bucks to bore the block I am referring to where the pistons go . I got je pistons 0.20 over bore so i just wanted to know if 400 bucks is to much

<object width="425" height="350"><param name="movie" value="http://www.youtube.com/v/zXoZ9BUcaGc"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/zXoZ9BUcaGc" type="application/x-shockwave-flash" wmode="transparent" width="425"...

HI I wanted to buy me some pistons for my 420a turbo. My question is what pistons are good for my car. How much would they cost and where can I get them? I am buying the pistons because my compression was low and I am planing on rebuilding it. Any of you guys know of some good forged pistons for...

I have a 420a turbo eclipse 97. Yesterday when I took it for a drive I was in 5th gear going about 60 mph. Then I stepped on the gas made 5 psi as usual then. Then as i started slowing down I heard my car doing a weird noise, almost like a machine. then when I was trying to give it gas it felt...

I wanted to know what kind of MBC i can buy so i can raise my boost up I had bought a crappy MBC for like 20 bucks and some how it didnt work they had told me that the TURBO XS Boost Controller Works great on Dual internal waste gate but I just want some opinions on what should i go with. That...

I have one small question. I just bought me a valve cover gasket with the plug rings and other rings that I dont know where they go this is a pic of the valve cover <a href="http://photobucket.com" target="_blank"><img src="http://i37.photobucket.com/albums/e65/pleaseletmeinn/vcg400001.jpg"...

i have a 1992 eagle talon tsi and it wont pass smog because on the hood of the car it doesnt have the stickers that state the emissions points...I need everyones help!!!i will need someone to take a pics of the stickers that they have on the bottom of the hood. the pics should be big...