so after looking around and searching I haven't come up with a company who makes a vband o2 housing for a hoslet. You would think that some one would have come up with one by now, or am I missing something?

From reading about the divided set ups it seems that the connected wastegate ports more or less defeats the purpose of separating the exhaust pulses from each other. My plan: Cut off the exhaust tube cap off the hole in the flanged side Add a flange on the non flanged side and use it to cap...

ok, so I bought a spider from the scrap yard, saved it from the crusher. feels kind of like adopting an unwanted puppy. neways, the interior is gutted, having never owned a spider where is the button to put the roof down? any help or a pic would be great. thanks

The time has come for me to replace my super 20g. I am looking towards the fp3065 or the fp3575. the mods are as follows built 2.4 magnus head w/oversized valves 272 cams magnus smim 3" exhaust 1000cc injectors built tranny ect.... I am looking to get around 450-500 awhp. The car will...

just out in a new motor and still have this problem, when ever I get on the car, wot, it misses from 4k to 5.5k rpms. I have timing set and have a dsm link and just keep getting missfire codes, normal for 1g cas swap. I will try and get a log tomrow. I have changed plugs from b6es to b7es and...

well i pulled the head on my 2.4 7 bolt and with 300 miles on the last rebuild there were some nasty scores in the cylinder walls. not sure what from. so as far as i am concerned i am running on borrowed time. now i am looking for another 7 bolt 2.4 and i was wondering if any one knows when they...

I have had it with my seat brackets they are just too high. does any one know of a diffrent company or has any one modified the sparco seat brackets to get them lower? seats in question are a set of sparco milanos.

well last night, after letting my car sit all summer due to the smoke screen that was comming out of my exhaust, I pulled the plugs. the spark plugs were driping with oil. I checked the intake track and there was a very thin film of oil , not enough to show any coloring on the manifold insides...

well the moter had 2020 miles on it. I took it back to the shop that assembled the long block because I didnt feel like tearing it apart again. turns out that all four rod bearing were shot and had spun in the rods. any idea how this could happen, it seems like they were starved for oil but the...

I have heard it in a few places but what I have heard is that the 4g64's require a base timing advance of 10 degrees then to advance it 3-4 degrees with the dsm link. I am wondering if there is any truth to this. I was told that it would help to get rid of the studder and missing at part...

if this isnt advanced feel free to move it or delete it, I wasnt sure where to put it. heres my question, can diesel fuel be used to supress knock. I was goign threw some of my pics and found some from the eaa. there was a booth that had a video of a quad four running 22lbs of boost on diesel...

question is this, I had my dsmlink set to default at a 4500 launch rpm. this all works on speed, so I am thinking that I could wire in a switch to cut the signul from the speed sensor making the computer think that the car was going 0 mph thus lowering the rev limit to 4500, kind of like a valet...

I am in the process of getting a carbonfiber hood, I know that hood pins are just something that has to go on. but, I was wondering if any one has tried using dzus fasteners insted of hood pins. they could be mounted flush and painted black wouldnt even be noticeable. mabey I am just smoking...

shop assembling the motor threw away the spec sheets(stupid sob's) ne way if soem one could provide me with the hks 272 intake and exhaust specs degrees open and close it would be greatly appreciated. I did do a search and only came up with arguments about web vs hks thanks S

ok, I know how many people here dont like any thing new or unproven but here goes anyway. I Was looking at magnus's sight and saw there dual wastegate turbo for rx-7's thought to my self cool, huge turbo and no lag. what if we took a larger turbo compressor wheel and housing and coupled it to a...

I have seen a lot of people just condeming that motor, for various reasons. my question, is there any diffrence in the rod angle of the hybrid vs the rod angle of a normal 4g64. I wouldnt think so aside from a diffrent head and lower compression pistons its not all that much diffrent than a...

I already did a search for this came up empty. the machin shop was takign otu the frost plug on my block and when they skrewed in the slide hammer they went right threw the cylinder wall. am I better off to just get a new block of get the whole thing sleved? both are options.

I was talkign to some guy on the phone who claims to be in devopment of a dog gear engagement tranmission for the dsm's I have searched the net for a while and still have not figured out how these things work. how do they shift diffrent than a synchro transmission. also I was told that I wouldnt...

I have a 2g with a 20g and all supporting mods including vpc gcc injectors fuel pump..... ne way when I run 10 lbs of boost at around 4500-5000 the car will misfire like I am only runnign on two or three cyl. the higher the rpms go the less boost I can run. I have tried the mopar combustion...

I have a 2g with a hrc s20g and all suporting mods walbro 225. vpc, gcc, 550cc inj., fmic, bla bla bla. when I run anything over 10lbs of boost my car coughs and my egts drop to around 200-400 deg F. however when I dump injector cleaner in (texco stuff) I can run up to 25 lbs boost no problem...

ok, I am in the market for a sheet metal intake and I wonder if some are better than others also where do the coil packs and ignition system go? thanks sopha

is there a diffrence other than the oil pan in the short block alone with out any of the front cover parts and disregarding internal parts? oil lines, coolant lines, ect...

any one know which wire is the rpm signal? thanks

I have a 2nd gen with a super 20g and greddy fmic all hard piped with vpc 550's and other asorted stuff. I want to put a little juce in to this thing for 5th gear on the hwy,(the new 5th gear for awd from tre) wondering if any one has tried the NOSzels from nos yet or any other recomendations...

I put in the vpc and all of the sudden I get a check engine light, I took it iout and pluged the mas pack ni and the same light with the same code its throwing the mas air code with it pluged ni and with the vpc. I sent the vpc back to bush for inspection along with the harness and they replaced...