The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support Fuel Injector Clinic

Search results for query: *

  1. Rust in uicp from alky injection

    I think I will go to pure Meth. I think its the water content. But I do have a srt4 front mount I may try with new aluminum piping to see if it helps over my ssmic and shirt route piping.Sent from my SAMSUNG-SGH-I897 using Tapatalk
  2. Ask your water alcohol injection questions here.

    I think I will go to pure Meth. I think its the water content. But I do have a srt4 front mount I may try with new aluminum piping to see if it helps over my ssmic and shirt route piping.Sent from my SAMSUNG-SGH-I897 using Tapatalk
  3. Rust in uicp from alky injection

    I was thinking turn on too low. i have it kicking on at 7 psi. because the turbo spools so fast and thats what was recommended but it also is spraying at part throttle in low boost so it might not be consuming it. I will raise it between 10-15psi since i'm running about 28-29psi.
  4. Rust in uicp from alky injection

    Hey guys after having my kit installed for about 6-8 months i pulled the upper intercooler pipe off and it has rust in the elbow before the throttle body. looks like the fluid has been sitting in the pipe after you turn the car off.fluid -20 washer fluid to 50-50 mix m7post turbo and m1...
  5. 4g63 cam gears vs 4g64 cam gears ?

    Thank you now i can check to see if my gears have those marks. also i could not find the diagram on Welcome To Extreme PSI
  6. 4g63 cam gears vs 4g64 cam gears ?

    They are stock gears but don't know if they are 4g63 or 4g64 gears ? i was just wondering the difference in degrees also if i do buy adjustable 4g63 gears.
  7. 4g63 cam gears vs 4g64 cam gears ?

    Yes i searched till my head hurt. I just bought a 98 gsx with a 4g64 7 bolt bottom end and was wondering what is the difference in the cam gears, how much in degrees and if they are advanced or retarded. as of now the car has a rough idle and all the timing marks line up so i'm just trying to...
  8. 2.4 cranking compression ?

    well it is supposed to have good pistons but who knows. so what compression ratio is your engine to have 210-220psi. It will have good injectors and alcohol kit soon so i will tune it pretty safe.
  9. 2.4 cranking compression ?

    Hey guys i just got a 98 gsx with a 4g64 2.4 and i have no clue how the motior was built but u just done a cranking compression test and it has 200-210 psi with stock cams and gears ! what is the estimated ratio with that much cranking compression !
  10. Car drowning out fm radio when key is on?

    The traces around the chip look good i just wonder if the driver chip going out could have caused the RFI ? i found my old ecu so i can rob a driver chip out of it and try swapping it out tomorrow.
  11. Car drowning out fm radio when key is on?

    I wonder if i can swap out an ic chip from a non turbo ecu to get this one going again ! also i do have a EBC hooked up to the bsc plug but has been working great other the the bad RFI !
  12. Car drowning out fm radio when key is on?

    Well I found the problem or should I say the problem found me.Sent from my SAMSUNG-SGH-I897 using Tapatalk
  13. Car drowning out fm radio when key is on?

    Well it will drown out my shop radio also about 25 feet away, its bad. It will not do it in acc with the engine off. Only when you hear the click from dash.Sent from my SAMSUNG-SGH-I897 using Tapatalk
  14. Car drowning out fm radio when key is on?

    Hey guys I have a weird problem. When the key is on it drowns out the fm radio with a static noise like Interferance. It does it running or not running.Sent from my SAMSUNG-SGH-I897 using Tapatalk
  15. Plastidipped my car.

    plastidip has a clear of there own to spray over the base color.
  16. Plastidipped my car.

    Anyone tried the clear on black ? also how hard would it be to strip when you ever wanted to do a real paint job. Does it just peel right off !
  17. Where are the FWDs at????

    you should do 1.7 60ft when you get it down pat. yes make sure you roll through the water or you will slip the clutch. sometimes when your spinning you can still get a better 60ft because its pulling harder.only bias ply radials and slicks can be lowered that low, if you have drag radials...
  18. Where are the FWDs at????

    I have ran full slicks and dirt tires which may compare closely to the hoosier qtp's and both liked about 8psi and would pull 1.70-1.72 60's. 10-12 was way too much to get a good sixty, which my worse was a 1.8 even at 10-12psi-, also my technique for doing a burnout was 2nd gear roll through...
  19. Where are the FWDs at????

    Try 8lbs in the tires and keep going up on the rpm at launch to see of it helps.Sent from my SAMSUNG-SGH-I897 using Tapatalk
  20. Where are the FWDs at????

    How fast were guys or hp were you making when you where blowing both tires from a 3rd gear pull ! i have my car running pretty good right now on about 27-28 psi, i can't even get a good log in 3rd gear anymore on street tires. LOL
  21. Alky Setup Thread and PSI Improvement

    Kit = BECOOL Stage 1 Nozzles = 7 GPH/M7 (441ml/min) & 1GPH/M1 (63ml/min) Pre Turbo nozzle Alky = 35/65 meth/water Washer fluid (Blue Juice) Turn On = 7psi Max = 17-18psi Pump Gas Psi = 17-18 Pump Gas Timing = 18* Alky Psi = 27-28 with some blips of knock that could be false knock. Alky Timing...
  22. Where are the FWDs at????

    I'm going to guess hes lean and has massive knock retard, i don't see the stock intake and even if its an ebay intercooler what type ? I had an 3" core 2.5" inlets bar and plate intercooler from cx racing that seemed to cool great !could you post up you dsmlink logs. Thanks...... you are...
  23. Where are the FWDs at????

    you have a mid 10sec setup easily, do you have any logs? no offense but i would want to burn my car down if it only trapped 112 with an hx40, i have just started to lean on my car at 22-23 psi on an E316g and it feels like its in the upper 118-120mph range and plan to run low 11's when fully...
  24. Failed BE316G after 4k miles....

    I run Shell Rotella T 15-w40 Diesel oil !
  25. Pushing/Burning Coolant, Fresh HG - found problem.

    Something beat the gasket out,also check to see if your injectors are dirty. It just doesn't look normal!
  26. Pushing/Burning Coolant, Fresh HG - found problem.

    Do you have pics of 1 and 4 also ?
  27. Pushing/Burning Coolant, Fresh HG - found problem.

    Looks like Detonation. Do you have any recent logs?
  28. Where are the FWDs at????

    Wheel hop can make anything go BOOM.Some of us don't have 900-2000 for a true lsd, so under 200 works for most and gets the job done.
  29. Where are the FWDs at????

    Drop in/insert ! I honestly don't know how you could explode one unless you were just spinning one wheel constantly getting the unit hot or something, it only gets hot or friction when one tire is slipping or turning a curve. I ran my first one for 2 years no problems.
  30. Where are the FWDs at????

    I have had drop in lsd's in my last 2 FWD cars and they help tremendously. on street tires it wouldn't torque steer but when i started making enough power to spin through 3rd gear rolling about 80-90 then it would spin one tire but on slicks it worked awesome.
  31. Where are the FWDs at????

    It should do that with ease.
  32. Rotating weight between factory 6 bolt and 7 bolt !

    About a year ago i weighed the crank rods and pistons between a 6bolt and 7 bolt and the weight difference was amazing like 30lbs less for the 7 bolt but it has been a while so don't hold me to the exact weight but it was alot for them to be so similar. I know that the 7 bolt gets a bad rap from...
  33. Where are the FWDs at????

    I have owned a ton of AWD and FWD DSM's and i went to a fwd this go around because i didn't want to worry about all the extra drive train parts to break t case,drive shaft,rear end,axles. etc.. plus the extra cost for a twin disc and 4 slicks instead of 2 yadda yada. LOL
  34. Evo 3 16g with 60-1 wheel and cover ?

    Thanks guys, i appreciate all the advice. My thoughts was that the 60-1 wheel would build boost faster than the 20g and maybe peak about the same and then when i wanted i could upgrade to a tdo6 or tdo6h exh wheel !
  35. Evo 3 16g with 60-1 wheel and cover ?

    Thats about what i thought. well i really like the ebay kit that has the tdo5h compressor cover and kamak 20g compressor wheel so i may look into that when i get done having fun with my evo 3 16g and it will still look stock. hey justin whats the trade off between the tdo5h and tdo6 covers...
  36. Evo 3 16g with 60-1 wheel and cover ?

    Ok i have noticed on ebay they have the 60-1 wheel and compressor cover kits that bolt up to our mhi turbos. My question is where will be the choke or limit of the td05h exhaust wheel with this compressor ? I know that this wheel is normally mated to the td06-tdo6h exhaist wheel ! Thanks.
  37. The 16g Drag Race Discussion Thread

    Any updates ? hopeing to get my FWD on 93 and meth in the low 11's soon.........
  38. Boost Leak at high rpm?

    PCV valve ? you may have to plug the line going to the PCV valve and try a BLT again.
  39. compressor surge or bov flutter ?

    I've got a solenoid and the software........ hhhhhmmmmmmmm
  40. compressor surge or bov flutter ?

    never thought to do that, will try it this evening. Thanks !
  41. compressor surge or bov flutter ?

    The line is new, i also have tried different sources with no tee'd connections and it still does it ? when idling with vac on top of the valve it does pull it open so the valve does move. I'm at a loss....... also i bought the car with the valve modded like that, but i have done the mod on a...
  42. compressor surge or bov flutter ?

    Hey guys i made a video but you can't tell much by it.In the video the needle will bounce between 7-9 psi until i give it more throttle. To me it acts like the bov is holding and releasing repeatedly.now you can here my bov release and it does have a flutter to it which i'm not worried about. It...
  43. Where are the FWDs at????

    COME ON GUYS STEP IT UP THIS SEASON ! FWD POWER YEAH................................(low 1.7 60 ft combo with the potential for 1.6's)15" wheels M&H 8.5x8.5/15 slicks 8-10psi car weight 2500-2700 leave with 5-7psi of boost on the 2step rpm depends on size of turbo 4500-6500 rpmsThis...
  44. compressor surge or bov flutter ?

    I done a blt a few weeks ago and found a small leak at the TB and that was it ?i will try to get one on my phone tomorrow.
  45. compressor surge or bov flutter ?

    Ok guys i thought i had this fixed but my car is having a surge or bov flutter problem ? It has a stock bov with the dodge garage mod. when i start to build boost in any gear around 2-4psi it will start to to fluxuate from vacuum back to 2-4psi until i give it more gas and build more boost. This...
  46. Low oil pressure and noise when at part throttle.

    When you hold the engine at part throttle you can hear a rattle in the middle of the motor and it doesnt sound like a rod knock. Could it be the balance shaft bearings?Sent from my SGH-I897 using Tapatalk
  47. E316G meth setup. Nozzle size for pure meth ?

    I got the pump back. He said he also had a problem with getting it to prime, so he took it apart and cleaned it put it back together and its working fine. He didn't say it was dirty though ? All of my lines are new and washer tank is clean.
  48. 15 psi @ 4500 hx35!

    Looks like you found the problem.
  49. E316G meth setup. Nozzle size for pure meth ?

    My water/alky injection quit pumping so i'm waiting for it to get back so i can continue tuning.
  50. thoughts on dirt track rims for 2g?

    I have a set of crager soft 8"s from jegs 15x8 with 5 or 5.5" BS $42.99 eachthey barely rubbed the caliper bracket on my 2g .
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top