I can't figure out why i have Been using a lot of oil lately ,on a fresh 2.4. I have 900 miles on the motor and everytime i check the dipstick, about every 60-100 miles, im about half a quart low on oil. Strange thing is i never see any smoke. The only time i smell smoke is coming to a stop and...

just got my block back from the machine shop after having some work done thought i would post up some pictures of the stock 2.4L rods and Pistons for anyone looking for pics.My block: 2.4L G4CS Block .20 Over(87mm) Manley Connecting rods Manley 8.5:1 pistons Kiggly Race Girdle ACL...

quick and easy question, when looking at a oem 4-pin relay from a 1g, from the bottom with the clip down what pins go where? I using a stock relay to rig up something and my multimeter is being a beast. A picture would help as I'm slow to catch on. Also while serching I found servile threads on...

ok so i was on my way into town today, car was running good just cruising up and down the mountains, i let off the gas and coast watching the WB my signal goes to 18:1 as its just coasting as soon as i hit the gas to go up the hill car starts sounding like a WRX i look over at the WB its reading...

thought i would post up my last log for comments and suggestions. I have one problem in the log and thats the fact i cant figure my 70-90 times from the spedo signal being so unstable, my speedo vibrates at high speed for some reason and im not sure if that has anything to do with it.

im trying to mess around with Maf clamp which is speed density after a certain hertz, car feels very strong and dsmlink is estimating 560hp with me and my buddy in the car. looking for comments, pointers, or any tips that i can try:)

I'm having my car painted at a local body shop, they are gonna have to replace the front bumper because one of the middle supports are broken and unrepairable. They have called me and can't find a bumper anywhere OEM or OEM quality aftermarket. I'm at a standstill with my car, seems everything...

gettting my 1991 Eagle Talon painted and the body shop is having trouble trying to scan match my paint. The paint code on the Firewall is rubbed off. I have tried looking here but not sure which grey/silver it is...

Just bought a new JMF "Race" SMIM and I'm trying to find out what the differance is in the older versions all the way to the latest version of the SMIM.Through some research i found out that the really old ones didn't have the three catigories such as street, Race, Drag, nore did they have...

does anyone have installed pics of the Magnus Street SMIM. getting ready to install my SMIM this weekend if my car gets back from the paint shop.

just looking at dsm's on Ebay and came across this GEM ROFL eBay Motors: Eagle (item 170303244289 end time Feb-22-09 22:35:39 PST)

alright whenever i first start my car cold it starts and idles high for about 3 seconds then idle starts to drop and then stumbles and dies. the only way i can keep it running is to pump the gas pedal. If i drive off after a minute of pumping the gas it drives fine wideband shows 14.7 +/- and i...

I just reinstalled my front KYB's to add a better bump stop, upon reinstall i scratched the position sticker off of the top:cry:, the one with 1-4 on it. My question is where can i get another?

I need help figuring out what is wrong with The installation the rear of the car, The AGX shocks have a metal sleeve at the bottom that will not slide over the rear mount. What needs to be done to install these on a 1g 1991 Eagle talon? see pics below

been looking in all of the junkyards and every 1GA i find has this cap missing on it, where else could i find one of these?

alright guys im getting ready to bolt the holset up and was wondering if anyone knew of a company that made a o2 housing with a flange like this(see 1st pic) for EWG's on manifold. I dont want an O2 housing with provisions for IWG. Thanks :thumb:

alright so i just performed one of my routine BLT and found a slow leak that sounded like it was coming from the exhaust manifold, i took a piece of rubber hose and held one end up close to my ear and used the other end to probe for the leak. It seems to be loudest around the turbo, i have...

does anyone know where to buy a SS clutch line for a 1G that goes from the fender connection all the way down to the slave Cylinder? and could you post a link to the website.

Alright so i have noticed a slight surging at idle, when im driving and on deceleration(foot off the pedal) the car doesnt cut fuel, my logger still states the IDC is 1.5% and the exhaust will kinda bubble and pop. so my hunt starts, first thing i did was check the idle switch with a multimeter...

alright guys I have a 1991 Talon and i have a smoking issue i cant figure it out. The car smokes only when warm. The turbo has no shaft play, the compression is 160 across the board the car is running extremely rich 81.2% LFT. The color of the smoke is dark blue and it smokes at idle and while...

well guys and gals i just got my fuel system plumbed on my stock 1991 talon, car sat for 2-years and stock fuel lines rusted out, i replaced the fuel filter and put a pump from a 2006 sti, which flows 160lph. car starts and idles for a second then starts to break up and you have to pump the gas...

hi everyone i have a 3g MAF, wondering if it will work on a 1G turbo, it has seven wires and looks very similar to the 2g turbo one, but the color of the wires is different than in the VFAQ guide. anyone know for sure? also how would i wire a 3g maf?

Well i have been running my car for some time with a broken downpipe, until today. I got my new downpipe installed and the car is much quieter. So much quieter that i can hear a loud rattle/ almost high rpm knocking, but not rod knock. It's coming from around the engine can't seem to pin point...

alright the other night i was getting on my car and i went to shift and pushed the clutch in and my rpm's didn't drop at all. I tried to put it into gear and it was rough going in, anything under 3000rpm's car drives perfect but as soon as you get to 3000rpm's and tried to push the clutch in and...

welp i just finished the free mods listed here <<http://www.dsmtuners.com/tuning-guide/1gturbo/stage0power.php>>.... I think i may have messed up on removing the vacuum lines, i removed the pcv valve and plugged it and put a breather on the other side of the valve cover, when i started the car...