Ok so today i went to change my taillight bulbs and when i lifted the hatch a good amount of water started falling into my trunk. I looked up and it was coming from the plastic hatch cover on the left side. So i took it off and the whole underside of it was wet, a good amount of water too. Now...
Ok, this is going to be a lost post so please bear with me. So I'm installing my new AEM wideband and afc neo. Among all this I find that my alternator fuse is blown. I go get a new one put it in and my car won't start, dead battery from it running off just the battery for so long, I'm not sure...
Ok so i know about a 2g mas in 1g with 550's, safc, and all that. My question is though, i have stock injectors, but an SAFC, Walbro 190, AFPR, AEM Wideband, & a logger. Now I plan on getting 550's in a couple of month's when i get money. But for now would it be ok, or just stupid, to put the 2g...
Ok, My car runs great, and i used to be able to run it at 18 when i went to the track. Now i tried to turn it down to 15 for daily driving, but ever since i put my new 16g on my mbc doesn't work anymore( yes it is hooked up correctly). Also when it hits 15 psi it feels like a soft backfire, and...
Ok here are pics of my ACT 2100 pressure plate, clutch street disc, and xact flywheel. This is the second time that this has happened, and i am clueless as to why. There is a squeaking that i hear all the time when i idle. But when i press the clutch pedal in, the squeaking stops. Both times...
Ok here are pics of my ACT 2100 pressure plate, clutch street disc, and xact flywheel. This is the second time that this has happened, and i am clueless as to why. There is a squeaking that i hear all the time when i idle. But when i press the clutch pedal in, the squeaking stops. Both times...
Well i'm about to head to my parents house to install my new megan racing springs and kyb agx shocks in front and rear. I heard that since the Megan racing springs drop it about 2 inches i will need to get thisEXTREME PSI : Your #1 Source for In Stock Performance Parts - DME Rear Camber...
Just wondering if anyone else has the same setup and how it rides. I recently purchased both and am just waiting for the KYB's to come in. I should be installing them next sat. Any tips or help that anyone could give me on how to make this process go smoothly?Also do i need any camber kits or...
Well I just recently replaced my: pressure plate, disc, flywheel, slave cylinder, master cylinder, new ss clutch line, throw out bearing, clutch fork, pivot ball, flywheel bolts. The car was driving fine for about 500 miles. Then just yesterday my car would not want to shift, or would need a ton...
Well i JUST got back from raceway park. Tons of cars broke down on the track today. Will put up the slips tomorrow, im tired as #### right now and about to pass out. Here are my times...13.6 run video
http://www.youtube.com/watch?v=AEO5rfWSDf4RUN 1
60' - 1.991
1/8 - 9.151
1/4 -...
wow... thats all i can really sayhttp://cgi.ebay.com/ebaymotors/ECLIPSE-2G-CARBON-FIBER-DOORS-DOOR-GSX-GST-16G-DSM_W0QQcmdZViewItemQQcategoryZ33642QQihZ008QQitemZ180103720873QQrdZ1sorry if this is a repost, i was just stunned when i saw this.
Finally took a few times to the track but i finally did it. I even think i can do better, just need new tires. It was my first run of the day, went up against an srt-4. Sadly no video as i was the only one there and the wifey wasn't there to record. My other 2 runs were both 14.2 at 96mph. Well...
Well got some video's of us 3 in action, all 3 of my runs, 2 of mico's (Da1NoNlY, 4g eclipse), and 1 of Anthony(Need4Speed, 4g eclipse). Here are my times, and our video's. I was so upset i didn't hit 13's, I know i can but I just keep messing up on the launch. A few tips please anyone?? lol...
Well i figure a bunch of us want to see what we can do at the track, i know i do and already have. But i think we should get a lil group and all head down together. Wednesday and Fridays are "test and tune" night. Basically a practice your runs night. Fridays are a lot more packed so i figure...
Well I finally got it to the track, not bad, I am very pleased for my first runs ever with awd. This is with just a 2.5" apexi dp, 3" Vibrant high-flow CAT, 3" cat-back apexi n1, k&n filter, and a mbc with the boost turned up to 14psi. Everything else on my car is stock. I am very pleased with...
Well I want to let people here know they are also welcome to come, that is all we have going so far, i will need a final list by friday at noon. If you want to come post here and add your name to the list. It says only for 4g'ers but i've talked wit a few people and i doubt they will have a...
Ok guys I have an small oil leak, now i don't know if that could be the cause of the problem, but on my way to my gf house i was getting a little bit of smoke from under the hood and a little stench. I get to my gf house and it becomes a little more than what is was driving there. I pop the hood...
Well my wastegate arm was never connected to the little pin when i bought my car. Now the hole on the little pin where the holding pin should go is all rusted and i have tried to clean it out with no luck. So i was able to get the wastegate arm back onto the pin and fabricate myself a holding...
how hard is it to do, would me and a friend be able to do so, and do it correctly, if so i would like to buy the kit from ExtremePSI and do it myself to save on labor costs, if you have done it yourself please post and let me know from your experience, thanks
ok im kinda stuck here, i want to upgrade my intercooler but i dont know which way i want to go. I am not looking fro crazy HP i would like to hit 300, 350 at the most as i want my car to be a daily driver also and a sleeper. I have an Apexi WS Exhaust, weapon R intake, Greddy BOV, Apexi SAFCII...
ok i just recently instaleld my apexi safcII and now the car runs like crap, obiviously because i havent tuned it. problem is i dont know all that much about how to tune it so anyone here that can help, im running stock except for a apexi world class exhaust 3", stock downpipe, greddy type s...
hey guys, i just bought an engine bay grounding kit and i was wondering what are the best places to connect it, i have 7 wires i believe, so any help would be greatly appreciated, thanks
ok last night i was driving listening to some music when all of a sudden all my speakers just stopped working and about every 3 seconds i got a kind of *blap* sound coming from them. I just checked them all out this morning and the speakers are fine. I checked the amp fuse and it was blown, so i...