Hey guys how are you doing? I have a strange problem, well not really any drivebility issues or anything, just my vacuum is a little low at idle. If I start my car in the morning it is around 15 hg after 1 minute warm up it is still the same. Than after going for WOT run in a few gears, the...

Hey guys how are you doing? Well I had a exciting trip to school today, was on the highway for an hour. When I got home, some of the AC Fan fins have melted. Then I looked closer and saw my o2 housing was glowing red, this was right off the highway, however, my exhaust manifold was fine, not...

I was looking around in ebay and found this:http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=150032751307&ih=005&sspagename=STRK%3AMESE%3AITToo bad they don't have 2G ones damn it. I don't think I ever saw anyone making these before. If anyone has one just put down a...

Hey how are you guys doing? My car has been very loud lately, kind of sounds like a mini diesal truck. I went to the track and managed to pull a 14.4 at 91 mph. My car felt really slow and the boost was set at 10 psi but would hit 15 psi at redline (Creep). My mods are:FMIC (26x12x3)...

Hey how are you guys doing? Alright I have a 6 bolt long block in my 2g. I have been having problems with the proper adjustments of the throttlebody cable. I have cruise control just to let you know. Anyway, no matter how I adjust the cable, when the gas is pressed all the way to the floor...

Hey how are you guys doing? I am going to share my personal experience with a particular radiator. I got it from JKG ULTIMATE MOTORSPORTS on ebay.I was debating if I should get an ebay radiator considering it is a very vital part for a vehicle. I was looking at a Fluidyne unit, Koyo and...

Hey guys, I am looking for those insulators that fit between the shock mount and the spring.My car is a 2G AWD (1995).So far I got the front shock insulator and the part number is:MR103156I couldn't find the rear ones. I am having this gutt feeling that they are the same lol.

Hey guys, I have a question about the TEIN SS's in a 2G. I am using my stock mounts. I have one problem, the coilovers on GR2 KYB setup was installed by a shop and I noticed they didn't put the shock mount insulators there.When I put my TEIN SS and put on the mount, the spring is...

Hey guys, I have a 1990 JDM motor in a 1995 Eagle Talon TSI. The motor comes with an external oil cooler housing, so I have an external oil cooler off a 1990 DSM. Having that said, I need to relocate my external oil cooler right now. I have a FMIC (26X12x3) and the cooler is just behind that...

Hey guys, I been having some little issues with my alternator. Here is the problem:When I intially start the car its always charging at 13.8-14V ALWAYS! lol. After 10 minutes of driving, I notice the car starts to charge 13.2V. Now after 20 minutes of driving the car starts to charge around...

Hello guys how are you doing? I am just wondering if anyone has had experience with the TEIN SUPER STREET for the 2G AWD DSM. My suspension is completely shot, so its time for an upgrade. I am willing to spend around $1300 USD total.

Hey how are you guys doing? Ever since my MBC took a crap on me, I have been running the J-pipe nipple boost source directly to the wastegate nipple.Now I will be running this for a while but I noticed in the early rpm's around 4000-4500 RPM I get 10 psi but when I am closer to 6000 RPM I...

Hey just wondering, whats this song called in this video? It has a nice beat to it with the volins.http://videos.streetfairey.net/Player.aspx?fileid=69034EB5-B905-4469-8976-82675164D49A&kw=4&p=7

Hey guys how are you? Ever since I did this 1g 6bolt with a 14B install in my 2g I have been having really bad turbo lag problems. I checked both compressor cold/hot side and they were fine. When I am in 2nd gear and punch it, I hit full booost around 3000 rpm. However, lets say I punch it...

Hey guys, I just been having this weird hissing noise when I am in 2-5 gear. 1st however, doesn't make any noise. The hiss goes away when:1. Lets say its in second gear, I press more into second with the shifter.2. 3rd gear hiss is cured when I press more into 3rd with the shifter...

Hey guys, I just been having this weird hissing noise when I am in 2-5 gear. 1st however, doesn't make any noise. The hiss goes away when:1. Lets say its in second gear, I press more into second with the shifter.2. 3rd gear hiss is cured when I press more into 3rd with the shifter...

Hey guys I have a 90 motor in a 1995. Anyway everytime I rev my car past idle my car makes a loud tapping noise. The tapping goes away at idle. Anyway I popped my hood and reved it again to see where it is coming from. First I checked the timing belt area and no it wasn't coming from there...

Hey I been having this strange starting problem that comes and goes. Normally I put the clutch down than start the ignition, the starting cranks and boom the car is one right away. However, once in a while when I press the clutch down and try to start the car nothing happens. The car doesn't...

--------------------------------------------------------------------------------Hey how are you guys doing? Alright my car has a stupid problem, it isn't a big drivability issue, but it is very annoying. Lets say, I am going a steady speed and punch it in any gear the car builds boost right...

Hey imagine getting pulled over by one of these.

Hey guys how are you? I posted a few weeks ago that when my car would hit boost it would just fall on its face and wont go anywhere. Anyway after diagnosing the problem for a while, I found out it was a MAF. So I had a spare 2g MAF laying around and that fixed it.Anyway now I have a new...

Hey guys how are you guys doing? Anyway I have a 2g dsm with a 1g 6 bolt motor. I have two 2g Mafs they both have some kind of issues.1st MAF builds boost but idle is a little rough Vac is around 15-172nd MAF doesn't build boost but idles fine.So what to do guys? I have a GM...

hey how are you guys? This is continuing this thread http://www.dsmtuners.com/forums/showthread.php?p=1666646#post1666646I did everything the wisemen have told me. I even took out my iridiums and put the regular NGK 6es gapped at 0.028Anyway I still have this boost leak like problem...

This is an update to this thread:http://www.dsmtuners.com/forums/showthread.php?p=1666646#post1666646I was told to do a few boost leak tests change my iridum plugs to NGK 6es.Have done the boost leak test a few times now and found no leaks. It help 20 psi for a good bit of time...

Hey how are you guys? I am just wondering if your coilpack is going, underboost will your car buck and sputter? I did a boost leak test it held 18 psi no problem for a bit, I got new NGK plugs gapped at .028 and have 8mm Accel wires. Check my ECU and fuses its all good. I do have a 1g in a...

Hey guys how are you? I have a 95 Talon with a 95 EPROM ECU. I also have a spare 95 ECU That has been socketed already for my DSMLINK, however, I didn't install it yet. I uses this method listed below:http://www.roadraceengineering.com/1gcasin2g95-96M2.htmNow it says to switch the...

Hey how are you guys doing? Alright, I have done a 6 bolt swap in a 95 talon TSI. I did everything on the RRE site and magnus site. The car starts up and everything. WHen I first had it the car would build boost no problem. However, later on it couldnt hold boost anymore. I didn't even do...

Just wondering how important is that air meter wire. If it comes lose will my car not detect the right air to fuel mixture and the car would bog and run really rich when trying to build boost? WOuld it act like a huge boost leak where your car would try to build boost than puffs it out and the...

The title says it all, what do you think is the top racer?

If you guys need some kind of marketing tips, or business help I found a website that can help you out for a small fee. If you guys need extra cash on the side, or want to really make money, read the course and it will guide you. Anyway if anyones interested check it out.HomepageI...

Hey guys, I finally got my car back and passed emissions. I did a 1g in a 2g with a 1990 motor. Now, I think I hooked up everything properly, it runs perfect. However, when i punched it today, the boost hit 18 psi and popped an intercooler pipe off. I have the MBC set all the way to the minus...