Hi guys questions for you. Is anyone running FIC 1680CC Hi-z injectors on pump gas? Everyone I see is using E85. The reason I ask is because I am trying to get my car started for the first time on Pump gas and it will start briefly and then die. I am thinking it's just to much gas, and I...
So apparently I have lost the included port blocking hardware from tial for the unused air pressure holes on my wastegates. Does anyone know what size screw would work to block the empty air pressure reference holes?
Hey everyone the dust boot is shot and gone on my outer tie rod, but it's pretty much rusted to my inner tie rod so I'm thinking it would just be easier to replace both. My question is, is it possible to replace both of them without pulling out the steering rack? I found one write up saying to...
Older style ETS 1g DSM Street FMIC it is the 3.5 version. Looking to get 270 obo shipped on it 240if you come and get it. Pictures and ad are here 1G DSM ETS 3.5 Street FMIC - DSM Classifieds
Like the title says I bought this intercooler awhile back under the assumption that it was an ETS 7" Street Core, looking at the picture of it compared to the one on ETS site the end tanks don't look right. Can anyone confirm that this is an older ETS or something for me? I apologize if this is...
So just received my ETS Street Intercooler. Dumb me didn't think about needing the crashbeam for this install as the ETS instructions say to mount it it to the crashbeam with self taping screws. I no longer have my crash beam since I removed it for weight savings. So I guess I am just looking...
So I had a build going in the old journal system before the new one got implimented, but just hadn't taken the time to move everything over to the new system, but today I have some spare time so hopefully I can get everything moved over to here. My plan is to have the main post updated with...
Ok, so I have a Redjack Racing twin scroll manifold that I will be matting to a HX40. I have never done a setup like this and attaching the HX40 to the manifold has me a little perplexed. Some areas require a shorter bolt then the others. I am just wondering how some of the other people have...
Does anyone now a place in the area that does anodizing? I have a fuel cell and a couple of other miscellaneous parts that I need to get anodized. I would rather drive to the place and drop the parts off, but if not I have no problem mailing them some where. I'm located in Virginia Beach, but...
So I had to pull my transmission and place in my spare, as I was getting ready to start getting ready to put in my spare transmission though I had the thought of replacing all seals. This leads me to my question sures anyone gave experience using seals from advanced parts? I was also looking...
I think I'm going to name my cart mayhem. So it's been awhile since I have have posted an update on here, so I figured while I wait for a tour truck now would be a perfect time to update. Since the last time I updated this blog, I have replaced the passenger side axle, put in my full blown...
Ok, so I was driving down the highway and start hearing a loud whine sounds while doing 70 mph. I pulled the car over looked underneath checked the shifting everything seemed, fine so I pulled back out onto the road only to get the whine sound again. So I start speeding up and slowing down and...
So I have gotten a little bit behind in my updating of this blog, with being underrway and just unmotivated to type everything out. So since I have been back from Haiti, the car is getting a brand new transfer case covered under warrenty, has developed a nasty exhaust leak at the o2 housing to...
Anyway my question is does anyone know what the 4 wires to the sending unit are?The only reason I ask is because I just bought a Full Blown dual pump setup kind of spur of the moment and it doesn't have all the connections on the top of it. Like the stock one.I know the black with the...
So I have the common rusty fuel sending unit, so rusted though that the metal hard line coming out the top has developed a crack and started leaking through. At first I thought that i could fix it possibly using some fuel tank repair putty and some sealant but everytime I thought I had it...
Welp, I am back in the game and this time with an awd, this makes my third dsm. I say third time is a charm because my first 2 dsms were lost to a series of unfortunate events (wrecks) so I feel that if I wreck this one I'm not meant to have a dsm lol. Anyway a little about the car it is a 93...
Is there any difference between a t3/t4 flanged exhaust manifold and a dsm flanged manifold? Like DNP for example, they offer an equal length ss manifold with both flanges for the same price, is there any difference besides the flange? Only reason I ask is because I plan on running an HE351VE...
So I wrecked my car today, hydroplaned leaving the base. It was my own fault for not having good tires even though I needed them. I don't know whether to part out the car or try to sell it as a shell without the motor or ecu, because I would like to go to an awd and currently don't have the...
I know people are always looking for a cheap wideband so I thought I would write a review on one that people don't normally go with. I decided to go with the jaw mainly ecause it was something different and reasonably cheap. I got the pre-assembled version which was about 90 bucks I didn't get...
Okay so next year after I get back into the states from deployment I plan on going with a 2.3 liter stroker. I was talking to my friend who use to have a stroker telling him about how i was starting my comparison on which company sold the lightest rods and pistons for the best bang for the buck...
So awhile back I ordered some axles from raxels, really top quality products, when I placed the order Marty warned me that my car may have either the 92 or 93 eclipse/talon/plymouth spline count in the transmission. I went out checked my car saw that it was made in September of 1992 so I just...
Welp got my ecu back from being socketed today and installed my ostrich, loaded up ds-map and uploaded to it. Car started, died shortyl there after adjusted my hard ve got a nice steady idle, of course I had to test the rev studder box so sexy. But now onto the long road of tuning ve...
So I decided to go with the JAW wideband unit which doesn't come with its own enclosure so being the dsm'r I am I got creative. Went to the dollar store and picked up a tuperware set then went to town with a steak knife and a lighter. I will be mounting it under the driver side seat with the...
So I was going to replace my front axles, so I gave raxles a call and he said that Its hard to tell what inner axle is the one I need for my car because i guess in the middle of 93 they switched to a different inner axle. I guess my question is how do I figure out if my car was made in the...
Welp I have started to get my parts for my switch to DS-Map on my 1gb. Can't wait t get this bi*** going just thought I would post a picture of my parts that i got. Detailed review later on when everything is up and running.
In the picture you will see my new FP 4" intake with my autozone...
So today started out like any normal day. Woke up at 430 got ready walked out to my car crossed my fingers and started her up. Let her warm up for a little than I take off to work. Nothing unusual happening until I pull through the main gate on base. I come up to a stop light and see a cloud...
Well I have gotten into the habit of blogging every time I do something to my car or my car does something to me, and the latest thing completed was installing some new plugs and semi new wires. Everything was simple enough pulled out the old plugs and it looks like cylinder 3 and 4 are...
So I have basically put my dsm on one day a week drive duty recently just because she has 217k miles on her and my wife doesn't work :-). So the other day I got home and I noticed some spots underneath, I thought to myself its just oil, but it looked like more than i saw originally when I...
So last Saturday I was all pumped to change the valve cover gasket and change out my fuel filter thinking that neither one should take that long or be that much work, But as we all know its a dsm anything is possible. So Anyway I got up bright and early and headed to the hobby shop on base, got...
So the last few days I have been dealing with a coolant leak that just wont go. First I thought it was a bolt that wouldn't tighten down, so I tapped it out to one size bigger gasketed it up and put it on. Still leaked but was leaking from the bottom of the thermostat housing. So I tried to...
Hey what's up? I don't know if I'm allowed to post this here, but I was just wondering. I was at Halls Mitsubishi today ordering some misc. gaskets and as I was leaving I saw a green 2g, blacked out 2g stock swirly rims, a front mount, and it looked like aftermarket fog lights. I was just...
So today nothing broke or anything like that. Just Ordered some gaskets 2 for the thermostat and some crush washers for the turbo. After I left mitsubishi I felt like i was finally going to get rid of all the little leaks I had only to find out that the leak that I thought was coolant was...
Well, got to do my first little bit of work on the car woot. The other day as I was pulling through the main gates to get on to base, I was rolling up my window and noticed it was going up really slow and the radio cut out, I was liek what the hell? So then i noticed my headlights were going...
Well it has been a long time coming for me to get back into dsms. I got my first dsm back in June of 2006, it was a White 97 GST five speed man I loved that car. I was slowly working my way through the mods (small 16g, hard upper intercooler pipe, manual boost controller, full APexi N1 exhaust...
The vacuum nipple is broken off the bottom of my cruise control unit. I was just wandering how hard it is to replace the unit, I looked in my Haynes manual and it says due to how complex the system is its better to take it to a shop to do the work. Is it really that hard to do?
Some friends and i got into a discussion on another board about what exactly is and isn't a DSM. . I think anything with a 4G63T is in fact considered a DSM but they are going by the fact that DSM was no longer used after 1994 and saying anything after 95 is just a mitsubishi.
:-( That...
well i booked 2 rooms at the bestwestern last november and we had some people back out and no longer need 1 of the rooms. if you need a room let me know asapJesse
sorry friend was logged on my computer this isnt my sn mines thesicknessemail me here [email protected]
Currently I'm in the middle of reinstalling my motor back into my 97 GST. I am having a hell of a time getting the mounts to line up. Right now I have the driver side and passenger side main mounts in and I figured that would be enough to pull the motor into proper alignment to allow the front...
Whatever happened to the turbo comparison Slowboy was doing? I forgot to make a thread watch on it. Can anyone give me the link? I tried seraching and came up epty handed :-(.
Ok i just got into a wreck and i need a new passenger side fender. What is the differnece between With Side Air Dam Type (Holes), Turbo, CAPA Certified Part, and the ones without? What the hell is the side air dam? If it helps I have a GS-T. Can anyone help?
I have read all the little battles between gs-t and GSX and everyone saying get a GSX just because it's AWD, I mean i have nothing against all wheel drive, but a lot of the things don't really apply to me.Basically I got into the DSM scene in June, this month i was involved in a three car...
OK I just recently wrecked my GST and found a GSX shell same year that needs control arms, struts, new axles, and a front sway bar. I was thinking that the 2 used pretty much the same front suspension setup and that i could just put mine on that one, am I wrong? Cause I know in doing the AWD...
All right, I was sitting in church thinking about what to do about my car, it has a 7bolt. I remember reading somewhere that the seven bolt started being put into the 93+ up cars right? So if that is true wouldn't the motor in my 97 actually drop right into a GSX or GST from 93 up?
I already did a search and i didn't really find what I was looking for. Right now i have a s16g no porting, a full N1 exhaust except the O2 housing, switched back to the stock intake cause i had a custom made 3in that wouldn't fit. And i also used the 2g install kit from slowboy. It seems...
Calling all Ohio dsm'ers Me and 16 diffrent people are comming up from southern ohio and will be travling through columbus on august 12th we should be travling through columbus at 10:00 am... we will be stopping at Hooters in Reynoldsburg ohio (aka Columbus) the hooters is on Main street...be...
All right, my turbo just recently blew up i have a S16g and the install kit coming from slowboy . Currently they are out of S16G's and the kit wont be here till next Friday or Monday, so i was wandering if i can convert my car from turbo to Na to drive it til the turbo comes? I know ill have...
I was jsut wandering if the Apexi N1 downpipe will bolt straight to the stock exhaust or should i jsut wiat to put it on after i get the rest of the cat back? Also what all do i need to make it fit to the stock exhasut?