The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support Fuel Injector Clinic

Search results for query: *

  • Users: danyz250f
  • Content: Threads
  • Order by date
  1. danyz250f

    Mud guards? Mud flaps? post pics of 2g's with the hard plastic mud gaurds.

    Yeah so when I bought the car it didnt have the flap. I haven't been able to find one so I am asking here. If anybody has one PM me and I will be willing to pay a resonable price.Or if anybody has a complete GSX or Tsi side skirts that are preferably red I would also be interested.
  2. danyz250f

    Laser MUD flap lost!

    Yeah so when I bought the car it didnt have the flap. I haven't been able to find one so I am asking here. If anybody has one PM me and I will be willing to pay a resonable price.Or if anybody has a complete GSX or Tsi side skirts that are preferably red I would also be interested.
  3. danyz250f

    Holset he351 VGT is goin on my car

    this is my quest for a cheap big turbo that spools up fast. This is off the 07/08 cummins. Its a he351 VGT (variable geometry turbo). Enough with part numbers. Thanks aero_sallee for the inspiration.I sold my 60-1 to fund this project. Parts list follows as.turbo 145 avcr 200 mani...
  4. danyz250f

    [RESOLVED] Heater only blows hot while driving!?

    I think my heater lines might be backwards. If some one could tell me how they are supposed to go that would be great.My heater is cold. warms up a little and I thought is was just my thermostat (180*) so I put in a 192*. Still the same but my temp guage reads straight up now. I did do a...
  5. danyz250f

    heater output sucks..

    I think my heater lines might be backwards. If some one could tell me how they are supposed to go that would be great.My heater is cold. warms up a little and I thought is was just my thermostat (180*) so I put in a 192*. Still the same but my temp guage reads straight up now. I did do a...
  6. danyz250f

    Heater problems. Luke warm then cold

    I think my heater lines might be backwards. If some one could tell me how they are supposed to go that would be great.My heater is cold. warms up a little and I thought is was just my thermostat (180*) so I put in a 192*. Still the same but my temp guage reads straight up now. I did do a...
  7. danyz250f

    Curent draw from alternator what could be wrong.

    My battery keeps dieing, so I traced it to the 80 amp alt fuse. What are some of the things this could mean. The alternator is less than a year old. But It has had some power steering fluid dripped on it. Why would it draw current with the key off.
  8. danyz250f

    Look at me, new paint!! but need opinions

    Here is my viper red ppg paint job i got for 2 subs and two amps. But I also wonder if I should paint the top black like a talon, or black like a laser. Its a laser for you slow people.LOL It only took him 2 1/2 months to get it this far. But it did have a caved in roof and huge dent in the...
  9. danyz250f

    DSM fashion

    Here is my friend working on my car. During my last T belt change we were like wouldn't it be sweet to Have a timing belt belt. So he had that sweet New York buckle and a couple zip ties and wah la, new very durable bad ass belt.
  10. danyz250f

    alignment ?

    I need my car aligned and I think I need some parts first. But not sure. I know I need ball joints, but what else? One bad thing when my car is off the ground I can move my tire back and forth. The play seems to be in the control arm joints. Do I need all new upper and lower control arms and...
  11. danyz250f

    Now my bov sounds like a turkey

    I installed my pte 6031 and my bov now sounds like a turkey at all boost levels. I did a leak test and fixed the major leaks I had. I also checked out the vac line for the bov. No leaks. Its an ebay knock off greddy. It was working fine with evo 3 at 20 psi. Now with the 6031 at all boost levels...
  12. danyz250f

    Oil feed form filter problem

    :mad: I am trying to install a new 6031 and the oil feed is not fun, actually the whole thing is being kind of a bi***. So all the allen set screw plug things in the filter housing are stripped out. Yes it was the right allen wrench. So what are my options. I dont think an easy out will do the...
  13. danyz250f

    free 6 bolt

  14. danyz250f

    Need some help on these 2 turbos

    So I have called SBR and extreme psi. I am looking at the sbr G60 and the SCM 3431e. They say they will make around the same hp, and spool at about the same rpm (4100) But is the 60 trim going to like pump gas better and make more power? The car is not a DD I have a pickup to drive too, but I...
  15. danyz250f

    Auto tranny stuck in 2nd gear

    So there is this tsi awd in town at a garage, I guess gettting fixed but it is also for sale by the owners of the car. The mechanic said that it is stuck in second gear. He also said it is probably electrical and could easily be fixed. He said that when somethig goes wrong the car will just stay...
  16. danyz250f

    timing belt tightens and loosens is that bad?

    Some times it will be nice and snug and other times it will be kinda loose. When loose in between the cam gears it has like a half inch of deflecton when tight it might move like 1/4 in.Any ideas on what could couse the tension to change.
  17. danyz250f

    DSM LINK question

    I am going to get link as soon as I sell my safc. But I was wondering if you can change the stock boost guage to read knock? Just like my chip does now. The site says you can change it to other guages but it does not list knock?
  18. danyz250f

    Anybody part of a car club?

    Me and my friend were talking about some car club names and some of them have pretty lame cars, and some clubs have pretty cool cars. What are some of your car clubs. We are kinda thinking of making a club and cant come up with a name. It sounds kinda like a lame idea but it might be fun.
  19. danyz250f

    I need a new backround.

    Anybody have some sweet big turbo pics we I can use for a new backround.This is my current pic of the import race this summer. The burn out contest, like six cars entered and almost all of them went till the tires blew. His brakes were cherry red when he was done.:rocks:He won.
  20. danyz250f

    SBR-G60-1, or the SBRg-50 dual ball bearing

    So my mod list is current. What turbo would be good. I am looking for 400hp and would like 12s or high 11s. I am high 12s now but I want more.Would the bigger turbo be worth the lag? Or would the BB G50 be sweet, get me there pretty easy, and be fun to drive.Plus what would the spool...
  21. danyz250f

    rear brake humming/squeeling

    So When I back up and hit the brake lightly be it using the hand brake or the pedal they will give out a loud hum. If I am going backwards fast and I press hard it is quiet. But slow and soft the noise is loud. And :coy: ing. Are my pads shot or what.Plus I cant lock up my wheels when...
  22. danyz250f

    So here is my ricer ? Flames!

    So I have heard of our cars throwing flames. But the only time my car ever has was when the MAS was bad and it backfired:coy: . I saw an evo at the track sit there at the light and hit his studder box and throw a flame out the back. Granted he did like run an 11.I have alot of mods and I...
  23. danyz250f

    2g rad in a 1g

    what would it take to get a 2g radiator in a 1g?
  24. danyz250f

    Belts are flying!

    I checked all the pulleys and the belts are really tight and are just fine when driving normally but, the second I do a launch while turning the alternator belt comes flying off and the a/c belt comes off its track. This led to a very long night last night and I need help.Any ideas what...
  25. danyz250f

    Timing Belt Getting Cut After Install

    So I took it apart and bought a new belt. The tensioner pulley is touching and rubbing the waterpump housing. Also the T belt is cutting into the oil pump. It is cutting the thin wierd nut thing that is kinda behind the oil pump sprocket. Does the tensioner pully need to be spaced out? My timing...
  26. danyz250f

    MMCD logger cable DIAGRAM needed

    I have made a post in the tuning section like a month ago and know one will help. So I try again. This is the cable I made and it did not work.I need a diagram for this kind of db9 connector. Steve said something about from male to female the pins are labled different. This cable I made I...
  27. danyz250f

    Wire harness plugs ? were do they go?

    I am putting my motor in and on the part of the wire harness that is on the fuse block that is kinda on the battery there is two plugs I cant find were they go. One plug looks like the maf plug but wider. The other plug takes three pins, but is like the size of the maf plug. I am just using the...
  28. danyz250f

    yesterday I learned something new about dsms [different flywheels]

    So I have new motor on the cherry picker and all I need do is bolt the tranny on. Ty an I lift it up there and struggle for a bit. Son of a b why wont it go on. SHat the fly wheel is to big. WTF So apperently a 90 fwd has a larger flywheel than a 92 awd.:mad: :mad:Now I cant get my...
  29. danyz250f

    Max rev limit with new motor

    I am finally putting my new motor in this weekend. I have a stage 3 chip with the revlimit set to 8k but I was wondering if it is safe or even worth going past that. I have Brian crower cams springs retainers bc/shafts gone and the stock crank with scat rods wisco pistons. Race balanced.
  30. danyz250f

    BOV question?

    My bov is funny sounding. I am venting via maft. :thumb: When i boost and let off no matter what level it will flutter. So if i let off and coast dont hit the wot it will be like WHHAAAAAP (engine spooling noise) PSHHHH FWA FWA FWA FWA (BOV noise) why would it doo this it used to be a hard...
  31. danyz250f

    N20 backfire blows hole in wall engine is still good

    This is my friends truck he is at bullydog head quarters in aberdeen Idaho ( I think I spelled that wrong) on there dyno and he puts down huge numbers after his n20 backfire. It is pretty sweet. I think he runs like 40lbs daily and can go up from there...
  32. danyz250f

    MMCD logger problems need help please

    I have searched and all their fixes have not worked.My old cable I thought might have gone bad. I could not read any ohms on the 10k ohm resistor and so I decided to copy it and make a new one. Plus I think the resistor was to small.All I get when I do a test is ecu comm error. I have...
  33. danyz250f

    ? about timing belt install.

    My motor is in my basement now, and I am putting my timing belt on. I dont have the special mitsu tool so I just wedged a wrench in between the pulley and the tensioner arm. I can get the belt really tight but when I turn over the motor it will start to bike chain off the tensioner pulley and...
  34. danyz250f

    General e16g eprom stage 3 safc maft 750s need help tuning

    So here goes I have an e16g, fic 750s, maft, eprom stage 3 chip, walbro 190I want to run more boost. The first problem I have is my logger wont work. It just says serial com error. When I unplug it from the port under the dash the ANTI LOCK light stays on. My chip did convert my boost guage...
  35. danyz250f

    90 laser rst that doesnt have an air to oil cooler

    My laser parts car doesnt have the oil to air oil cooler. Did some of them come with out the air to oil on or did they change mid year. Or is it only a 90 awd thing. I am putting this motor in my 92 and I kinda wanted the air to oil cooler.:(
  36. danyz250f

    CAM ? and FREE Titanium RETAINERS

    So I when to barnes and noble to get my monthyl D SPORT and there is a parts catalog in it to. In the catalog there is a BRIAN CROWER add. FREE titanium retainers with purchase of cams and springs it is a coupon by the way. I go to there web site and there prices are really reasonable.They...
  37. danyz250f

    eprom plus maft settings

    I will have an eprom set for 750s and a maft. What should I set the injector size for on the maft?
  38. danyz250f

    Were to find eprom sockets

    I desoldered my eprom out of my new eprom ecu, and now I need a socket for my eprom chip. Radio shack only had a 40 pin socket. and the other computer store in town had no idea what a socket was. Were do I find a socket, I have only tried one radio shack though.Also do I need to put back...
  39. danyz250f

    IAT where do I get a new one

    Intake air temp sensor, were do I get one besides the dealer. I think mine is bad becuse I throw the code and it reads a fairly constant 80 degrees. Could this also cause knock.
  40. danyz250f

    weird oil pressure, and 90 oil pump ?

    After the track day I have had wierd oil pressure. It might be a loose connection on the guage. But when I start it up after it is cold I get good "in the middle of the 2 lines" oil pressure but after it gets warmed up it usually stays all the way to the bottom, and never moves much. It used to...
  41. danyz250f

    Getting an eprom with my maft do I need an afc

    I am getting an eprom chip burned and I have a maft and afc do I need my afc? I allready have a honda kid who needs my afc and will buy it for 175 bucks. Also is there other places besides dsmchips that burn eproms.
  42. danyz250f

    seperating 6 bolt piston and rod

    How do I seperate the stock 6 bolt piston and rods. Is there clips in the pin or is the pin pressed through the piston and rod and has to be pressed out some how?
  43. danyz250f

    My interior mods tell me what you think!

    These are my mods I have done over time. My favorite is the Maft t because it is a bi*** to get out out of the car every time you want to change something. Believe it or not it is super snug and I used nothing at all to secure it in there.The deck is a new panasonic deck that does everything...
  44. danyz250f

    abs delete with 90 parts

    I have a 90 rst laser without abs, and I want to get rid of my abs. Can I use the parts from the 90 on my 92 or are the 90s different like everything else. I would probably follow the vfaq just use the old parts off my laser.
  45. danyz250f

    new 3 in exhaust and now it backfires

    My friend bought new tsudo 3in cat back exhaust and we put it on and now it backfires. We left the o2 sensor alone and screwed it in the new exhaust because it has a bung for it. All we did was unbolt stock stuff then bolt in new stuff. It looks great by the way and sounds sweet too.But...
  46. danyz250f

    new 750s, tuning issues, tims 100% but smoke at wot

    I just put in some new fic 750s the other day, and on my way to the track in Boise which is about 5 hours away I gave it a rough tune. The car ran rather well at the track but the trims were way off and I cant seem to get the low and mid trims to under 120%. But the WOT I can get to right close...
  47. danyz250f

    sony clie peg nr70

    Has anybody ever used a sony clie peg nr70. I have the oppertunity to buy one for 50 bucks and was wondering what I would need for like usb and serial port stuff, or if it comes with serial port stuff to hook up in the car.:confused:
  48. danyz250f

    lots of eprom chip questions

    I think I want to get an eprom chip. I have heard that you can eliminate the phantom knock with one, but does this also eliminate being able to read real knock. Also you can get a stutter box programed into one, and what and how does this work. Is it safe to build boost in nutral or does it only...
  49. danyz250f

    Just Dropped off the 6 bolt at the machine shop

    I just dropped off the block and head to the machine shop to get the ball rolling. This is a big expensive step for me. Here is the setup that I am considering doing.2.0l Scat rods Wisco 8.3:1 pistons balancing shafts gone bore .20 over rebuilt head with possibly new cams but not sure...
  50. danyz250f

    injector sizing question

    I have an evo III 16g turbo and SAFC II and a MAFT to tune with. I am looking at fuel injector clinics 650cc or 750cc injectors what would the best set of injectors be for around the 400whp mark. I want to max out the turbo. I know I cant really do that with my stock internals, but I am in the...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top