I have a fiberglass front bumper wich i regret. And fiber glass sideskirts,should i get a fiberglass or urethane rear bumper wich one fits better and will look better painted.The fiberglass is 160.00 and urethane is 250.00

you know the old school ones that were all clear with no red in them.who sells them?

you know the old school ones that were all clear with no red in them.who sells them?

you know the old school ones that were all clear with no red in them.who sells them?

These are the 3 colors. Keep in mind my car is stock blue so If I did another blue the engine bay and jams would be fine.Blue http://i43.photobucket.com/albums/e394/rseclipseman1999/gfdfdfdg.jpg Grey http://i43.photobucket.com/albums/e394/rseclipseman1999/gfdh.jpg Silver...

What do most of you guys use to take out the ribs of the front bumper? I have a big fmic and want to open it up but dont want it to look like a hack job. Also if anyone has some close pics of theres that would be awesome.

I bought a 95 eclipse with a carbon fiber hood already on it and the passenger side of the hood sat up higher when it was closed and you could even see the filter it sat up so high. I though it was just the hood so I got a black oem eclipse hood off of a another guy and just put it on and it...

If I were to bolt on a 14B turbo would I need to get new injectors, fuel pump ect to run 15psi? I want to get around 300 crank hp without doing a lot of different mods and tuning. I already have basic bolt ons.

The codes I pulled off of my car are p1400-emission controls and p0505 idle control. Anybody have any good tips to what this is? Thanks

I bought a 95 GST and in AZ the temps average between 108-116 right now and everytime I come to a stop light or park and the car idles the ac tuns hot. Also if I drive with the ac on for about 5-10 minutes the temp guage goes to 3/4 high mark and as soon as I turn the ac off it goes back down to...

I just bought a 95 GST and the stock oil pressure gauge stays at the top high mark and doesnt go down. Anyone know why or how to fix this?

The 95 GST I got has fmic, intake, hks bov, 3" turbo back exaust, and everything else engine wise is stock. I would like to get around 300hp and run low 13's in the 1/4 what would be the best parts to get and keep a smooth reliable ride for a everday driver. I dont want to get into the dsmlink...

with airbags do they set you camber off bad and wear your tires because when you lay on the ground the tires boe out but if you raise it are the tires fine are will they wear faster

Im looking for a new car alarm and I dont want the one that has the 6-7 different sounds when it goes off. I want the one you always here on tv,movies ect that just does the chirp,chip and has only one siren when it goes off. here is a sound clip...

I bought the car like that I know about venting to the atmosphere. The guy put the stock injectors and turbo back on when I bought it but the afpr is still on and it has a walbro 255. That is why Im asking if fuel pressure should be the same even with a 255. Also he had a safc-2 hooked up to the...

I solved the rpm problem when it kept bouncing I disconnected the safc2 and it stoped when trying to hold the rpms at 2k. I failed now because hydrocarbons were too high and running too rich. The fuel pressure is around 40-42psi at idle with the vac hose connected. The bov was vented from when i...

When ever I try to hold my rpms at 2k or 2.5k it will bounce up and down it will not stay there. It either wants to keep going up or will bounce up and down. Is this a sensor or what?It only does it in neutral or when the clutch is in. I have a 95tsi awd.

In normal driving and shifting aroudn 3krpms-4krpms the tranny shift fine. When I shift at 6k or 7k rpms going into 3 it will grind and wont go in to gear right away. The car is a 95tsi awd with 83k miles on it. Just wondering whats causing this

When ever I try to hold my rpms at 2k or 2.5k it will bounce up and down it will not stay there. It either want to keep going up or will bounce up and down. Is this a sensor or what?It only does it in neutral or when the clutch is in. I have a 95tsi awd.

Can someone photoshop these two cars below this blue colorhttp://i43.photobucket.com/albums/e394/rseclipseman1999/20795reflection.jpg http://i43.photobucket.com/albums/e394/rseclipseman1999/IMG_0841-2.jpgHeres the blue color I want them to be...

I have a 95 tsi and it already has the 97-99 eclipse front end and I plan on getting the whole car painted including the roof. I have a full 97-99 eclipse rear conversion sittting at home including the 97-99 turbo spoiler. Should I convert it to that or keep the talon rear and paint the stock...

Everyone that has painted there talon taillights red on top where the amber color is, what brand is the red translucent paint and where did you get it? Also do you just lightly sand the top of the taillights and spray them?

Can someone make the center taillight piece the same color as the car but keep the gray part buy the license plate gray. And another one with all of the middle painted including the gray part. Thanks to whoever can do this.:thumb...

I know there are some mixed reviews over ebay turbos but these 3 different one I fond all come with a 1year warranty on them. Would it be worth to buy since they are allot cheaper than a fp,pte,sbr ect since they still come with a warranty...

I bought my 95 tsi awd and it had a light weight underdrive pulley on it. Well after searching on this site I want to put the stock crank pulley on. My question is, is it as simple as unbolting the 4 bolts and poping it off or do I have to remove the timing belt and all that stuff?

I bought a 95 tsi awd and there are some parts lying around in the engine bay and I dont know what they go to. Im knew to the 4G63 so I need some help.1st piece is this wire coming out from under the fuse box with a pigtail to plug into something but I dont see what it plugs into or what it...

I bought a 95tsiawd and the hksssq bov is vented. The intake doesnt have a area to run a hose from the bov to the intake. It only has two little nipples for other lines. Im not sure exactly what the maft is people use when venting but I dont feel like buying one and hooking it up. The car idles...

Can someone take the spoiler off and make the roof black like a talon. thanks http://i43.photobucket.com/albums/e394/rseclipseman1999/gfdfdfdg.jpg

Below is a list of all my current mods on my 95 tsi awd. Will 660cc injectors and a evoIII16g be enough to get me in the mid 12's ? I also want this to be a daily driver and dont want to spend a extra 200.00-350.00 for a 50trim if I dont need it. My goal is just for mid 12's and around 300awhp...

Ok right now my tsi is stock blue and in bad condition. I either want to do a eclipse conversion and charcoal grey or leave the rear a talon and paint in white. Wich one do you guys think looks better? Not which one is more rare or uncommon but which one looks like a nicer car. Im having a hard...

I want to see some pics of all the grey talons out there.

I just got this turbo http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=330021633144&sspagename=ADME%3AB%3AEOIBSAA%3AUS%3A11 and was wondering do I need anything else to bolt it up? Also what size injectors should I get a have s-afc2 and just want to be around 300awhp or 350crank. I...

Should I paint the bottom white and keep the talon rear or paint the car viper blue including the roof. My car has the 97-99 eclipse front end on it right now.If I paint it blue I might do a eclipse rear on it too.Heres a talon that white with eclipse front...

Can some one change it to viper blue. One with the the top still black and another with the roof painted blue too. Thanks Heres the car http://i43.photobucket.com/albums/e394/rseclipseman1999/whatever.jpgHeres the color http://i43.photobucket.com/albums/e394/rseclipseman1999/gfdfdfdg.jpg

Im going to have my car painted and earl sheib but want to prep it myself so it turns out better. What are the steps to prep it before paint?

What other part will I need to bolt up a SBR-G50 or a turbonetics T3/T04B Hybrid to my 2g?

I plan on getting my tsi awd painted in a few months and Im going to do all the prep work myself. The guy at earl shieb said it would be hard to paint the roof because its black plastic not metal so they can really sand it very well. Do you guys have any advice on how I could prep the roof for...

I bought a 95 tsi awd that is stock electric blue but the paint is messed up and the color is a little to light for my taste. I would love to do charcoal grey because it looks the best on cars or even a clean white but Im affraid its going to look dumb when I pop my hood and it blue underneath...

Where is the best place for the price,warrenty and service to buy a 50trim turbo?

I just bought a 95tsi awd and was wondering what would be the best injectors and turbo to get to reach around 350whp? I have a walbro 255,safc-2 and other supporting mods and just want to get injectors and the best turbo for the price to reach my goal and still have a good street car. I want to...

Where can I buy those black screw like clips that hold the wheel well splash guards to the bumper? I dont want to go to the dealer because they want 2$ piece and I need all of them

I just had my new rims put on yesterday. Didnt even have time to wash the car but I had to post pics.These are my old rims http://i43.photobucket.com/albums/e394/rseclipseman1999/mynewsig.jpgHeres my new rims http://i43.photobucket.com/albums/e394/rseclipseman1999/DSC00305.jpg...

I had a manual swap on my car done over 2 years ago and I took out the tcu and replaced the ecu with a manual ecu.My question is Has anyone done the rewire to get the speedo to work again? I have armonds directions but it for a 95-96 and I heard that the 99 is a little different when rewiring...

Does anyone have pics of there car with a aftermarket sunroof in it. Im trying to figure out if I should get one or not.

At the bottom right corner of my bumper a peice of the bumper looks warped and waves up a little. What would be the best adhesive to put in between to try to make it flat. A body shop said stick a peice of would in there because if I just try to glue the part of the bumper to the other half it...

Well I tuned my 440's to aroudn 18psi for idle fuel pressure and turned the boost up to 15 psi . But at wot my fuel pressure only hits around 40psi and leans out fast so I cant step on it for that long in any gear. I use the largest ring, 2.72 disc and short gunmetal colored spring for the...

Well I started my car up today after installing my 440's and it started up and idled fine but if I if I push on the throtle at all it wants to die. My fuel pressure gauge is reading 0 my vac is around 20. I changed the sfmu disc and spring to the 2.72 and largest disc and dark spring and have...