The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support STM Tuned

Search results for query: *

  1. Boosted90GST

    Did anyone see this ?

    http://www.ststurbo.com/i uh dont really have a conclusion for it yet... i'm undecided give me some time to reply in the mean time hook me up with some of your info :thumb: :dsm:
  2. Boosted90GST

    srt-gst

  3. Boosted90GST

    srt-gst

    Well first I already have a 2.3 stroker motor i'm perfectly fine with it but id like to do somthing abstract. as far as the srt4 motor goes I WILL make it fit with my own custom mounts other than that the basic reason I want it... those motors are strong really stronger.. stronger than a 4g63...
  4. Boosted90GST

    srt-gst

    just as the topic says. I have access to a fwd 1g shell I was thinking about putting an srt4 motor into it but everyone says it wont fit.. well what if i use a buschur rwd conversion and put the block sideways? and or just make custom mounts..
  5. Boosted90GST

    Shaved Door Handle Molding

    4g63swap, do you have any good pic's of that install you did?
  6. Boosted90GST

    oil cooler

    alright well I want to relocate my oil cooler on my 90 but I don't want to do any ghetto fabbing etc. I've seen a bracket befor that moves the oil cooler to the frount drive side (just like everyone else does) problem is i've check my history over and over and can not seem to find the site where...
  7. Boosted90GST

    Would you buy fiberglass doors for your 1g?

    The doors are not listed on the site due to being discontinued hence the reason i'm trying to get them back, but here is their website http://gtfabrications.com/
  8. Boosted90GST

    Would you buy fiberglass doors for your 1g?

    agree'd, these are strictly RACE ONLY altho they're a bit pricey i'm sure the company could do somthing about that. last time i check they had the for $1,000 befor they discontinued them. I gave the owner the URL to this thread and he's watching it to see exactly how much interest these doors...
  9. Boosted90GST

    Would you buy fiberglass doors for your 1g?

    Why would anyone use these doors on a DD? These are strictly race use only and a great idea IMO for quick weight reduction befor the track. As far as 2g doors they don't have them in fiberglass but they do have them in carbon fiber :thumb:
  10. Boosted90GST

    Would you buy fiberglass doors for your 1g?

    Aight guy's, i found a company that made fiberglass doors for us 1g guy's.. I was watching them for a bit then they discontinued them. I want to take a vote and see how many people exactly would be interested in these doors so they'll start making them again. :thumb: :dsm:
  11. Boosted90GST

    will this setup work?

    yea, i should throw that in the profile.. i have a zextronic wideband o2. well i think im deff going to go the DSMlink route i guess i'll just sell the chip or hold onto it for good measure even.. ty for the help guys
  12. Boosted90GST

    will this setup work?

    yea, i should throw that in the profile.. i have a zextronic wideband o2
  13. Boosted90GST

    will this setup work?

    Aight guys, I just bought a 91-94 EPROM ecu that has been socketed. It currently has a stock chip in it now but it came with a TMO Stage 3 clone chip. The part number on this ECU is MD193295 which will show as a California ECU but has been converted to FEDERAL standards. Also it has brand new...
  14. Boosted90GST

    Gullwing conversion

    i've seen a picture of a conv 1g befor it looked like it was deff somthing from japan and japan only also i'm pretty sure they did make them over there and or in europe. i'll try to find the pic but dont quote me on it i could be wrong. anyway i think it would be a little less work just doing a...
  15. Boosted90GST

    Carbon Fiber Hatch. [Merged 9-6]

    yea... good choice. i don't advise stock glass tho it's much to heavy and it'll cause major cracking. you need to get lexan for it. other than that they're awesome, i do advise bracing if your fairly moded with your car such as rear hatch pins or somthing of that sort just to be safe - good...
  16. Boosted90GST

    Ferrari P 4/5

    this thing is sick... :thumb:http://www.supercars.net/cars/3456.html
  17. Boosted90GST

    2G Good 7" LCD in-dash unit?

    id have to agree with jaxon i also have a clarion and it's great picture quality is great, u can even change the colors you want the buttons to light up to match your car :tease: it's worth the money by far and i doubt you'd regret buying this unit
  18. Boosted90GST

    datalogger, maf, maf trans...

    i do have the eprom ecu, and it's socketed n' chipped also. so i will just tune in with the dsmlink then.. i have too find my cd that came with the logger and make sure it's the correct software if not i'm sure i could get a copy.. do you think id be better off sayin #### the dsmlink and going...
  19. Boosted90GST

    Im stumped, Wisemen...I could use some advice

    well the codes arn't lieing to you... my guess is both.. check all the connection clips on the injector harness and see if everythings okay.. have you ever changed your knock sensor befor? is this the original 1? if so then it's just shitting out on you and it's time for a new one
  20. Boosted90GST

    datalogger, maf, maf trans...

    aight, well i have all of those 3 list in the topic im pretty sure the pda is equipt with dsmlink already if not i'll get it, anyway the shop i have my car at doesn't have a dyno.. this guys tellin me he doesn't need a dyno to tune it in for me and i think otherwise. so i figured id just let him...
  21. Boosted90GST

    relocating power steering pump

    I thought about relocating my PS also... but i got one of the buschur alt relocation kits so i'm just going to use that and most likely cut PS out totally, my car's fairly light and i really could careless about the PS so i deff think its going
  22. Boosted90GST

    Custom work

    aight if i can't have CF then i'll take a polished one that says "4g63 NX GS-T" if possible please just pm me the price n' what not thanks
  23. Boosted90GST

    if you had to pick a car to build

    i say go for another DSM but.. I wouldn't mind a GN myself.. our local turbo shop here does lots of work on them and i'm starting to get hooked on them and id like to buy 1 to play with also ROFL :thumb:
  24. Boosted90GST

    Recommend an Exhaust for Camaro

    friend of mine has a v6 camaro, he went with flowmaster it doesn't sound half bad at all + it didn't break his pocket :thumb:
  25. Boosted90GST

    Custom work

    i'll take a CF one myslef asap please thnx :thumb: :dsm:
  26. Boosted90GST

    So Fresh So Clean

    while your at it with the CF hood why not add a CF hatch too? :D
  27. Boosted90GST

    Carbon Fiber bumper shield......

    first as swade said fix your problem with running rich, second: if you like the part and want one anyway just for looks sorry to say but it doesn't exist.. i've been trying to find one for a 1g as well. i've come to the conclusion of just getting one custom made. i'm going to call carbon...
  28. Boosted90GST

    what spoiler is this?

    yep.. along with the rest of the kit
  29. Boosted90GST

    2.4l Dream!!!

    if i was you, id find a 6 bolt (perfer a 1990) but any will do.. get the block and take it to the machine shop just do a 2.4L stroker kit, you can buy a complete kit for a reasonable price then swap out the 4g63 crank with a 4g64 crank and have it knife edged.. there are several ways you can go...
  30. Boosted90GST

    Downshifting

    i can hit 1st @ 25mph it'll give a little jerk but nothing to worrie about. if you get a better clutch you can do it to :sneaky:
  31. Boosted90GST

    inner fender wells

    sure you can use them frount mount or not it doesn't matter. if your car doesn't have them i sugguest getting a set so you don't have anything flying up in their.
  32. Boosted90GST

    Downshifting

    if your RPM's are higher than 6k don't downshift it's 9 out of 10 going to be all bad for you. as far as anything goes just remember, never downshift to 1st unless your going 20mph or less, you can go from 3rd to 2nd around 40-45mph.. just drive the car a little more for having a question such...
  33. Boosted90GST

    SuperBowl Commercials

    I thought the burger king one was aight, with the whole puttin the burger thing together with the people all dressed up like tomato's, burger, bun's etc... ROFL
  34. Boosted90GST

    1GA Headlight Conversion Possibilities???

    if it matters anyway i converted my frount end from 1ga to 1gb using aftermarket kit, hood, fenders, headlight's n' corner lights came out pretty good IMO
  35. Boosted90GST

    Windshield Wiper Cover (Cowl Trim)

    I decided to shave my whiper blades and im consulting a company now about making a carbon fiber piece to cover the dranage holes and blend with my hood, hopfully all goes well and I can get somthing.
  36. Boosted90GST

    Oil guage reading to low

    Well it could very much be the leak from the valve cover. Altho I would check the oil pump just to make shure. You need to loose that breather stat and get a that catch can installed. Try fixing the leak and let us know your results if you need further information :thumb: :dsm:
  37. Boosted90GST

    avatar please

    yea, dude that would be great, if you can go to www.alsacorp.com and look under "stylin base coats" the color is Titanium Grey.. this is the paint i bought and using but it just happens to be winter and i can't get it painted till spring. :cry:
  38. Boosted90GST

    avatar please

    hey, if it's not too much trouble can someone make n' avatar out of this ###, thnx.
  39. Boosted90GST

    Setting the timing without the Mitsu MD tool 99....

    when you buy the new tensioner kit, it has a pin in it.. put the timing belt on and make shure everything is lined up properly.. when you put the tensioner on just pull the pin and u'll be set.
  40. Boosted90GST

    Harrisburg Meet

    Hey, i'm about 2hrs from Harrisburg but I wouldn't mind driving up and I can bring a few other guy's with me. Let me know what's good with it. :thumb: :dsm:
  41. Boosted90GST

    Do anyone knows a good dsm shop around Easton, Allentown Area?

    Northeast Turbo located in Northeastern PA. Wilkes Barrie/Scranton area.. Hazleton to be exact i'm sure that's pretty close to you.. PM me if interested I can help you get their I live about 3 blocks away from it. ROFL
  42. Boosted90GST

    How many runs from a 10lb Bottle?

    just to keep it all in a hazleton settin of replys.. my experiences with nitrous consist of this.. the 10lb bottle aint worth or any good unless u plan to drive to wilkes barrie on the regular to refill.. i decided to use my 10lb bottle for my N-TERcooler sprayer and i bought 40lb tanks for the...
  43. Boosted90GST

    1g Front Bumper

    to answer your question, yes the frount bumper is urethane. as far as fixing it.. i can't help you. but my personal imput would be get another front bumper if your's is that messed up.. i mean they're cheap and very easy to find. if it matter any i have a 90 red eclipse frount bumper layin...
  44. Boosted90GST

    so yo...

    heh, so heres the deal. my girl needs a new car n' she really wants a honda. now i dunno about everyone else but i am so anti-honda it's not even funny i can't stand them! i told her if she gets 1 she can't park in the garage or driveway, nore wash the car at the house.. i told her she needs to...
  45. Boosted90GST

    buyin a new car..

    yea gas isn't all that bad at all.. as far as buyin another dsm im gettin a tsi n' a laser both awd turbo for 2500 from a buddy of mine this spring so i'll be up to 3 dsm's but i need a daily driver n' well i think my mind is made up im going to go buy 1 right after xmas n' ya i kinda do want it...
  46. Boosted90GST

    buyin a new car..

    so yea, i went lookin for a new car and i've come to a conclusion that I really like those new Chrysler 300C's. so i went to the local dealership and got some good info about the car n' I really think im gunna go pick it up. in my opinion they're beautiful cars, fully loaded, leather, wood...
  47. Boosted90GST

    New Silvia is AWD

    :barf:
  48. Boosted90GST

    anyone have these wheels on a 1g?

    Post the picture of the rim's in the photoshop forum and ask for them on a 92-94 talon w/e color you want and someone will chop it for you.
  49. Boosted90GST

    Any experience with the Motorola RAZR?

    I get great reception, I have hurd the razr got shitty reception befor I bought it but I haven't had a problem with it yet. The speaker phone is great and it doesn't break up at loud volume like a nextel and yes it is a very nice sleek design, somtimes I worrie about breakin it to often it's...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top