hey guys i have had my eye on some giovanna Naganos for a while now. I want the 18 x 7.5 but i cant seem to find the wheel weight on them anywhere. Can anyone point me in the right direction. I have alrdy tried wheelspecs.com and wheelweights.com I cant seem to find it anywhere. here is a link...

I want to get some Enkei RPM2's tires.com has them so the size i think i am suspossed to get is18 x 7.5 5-114.3 42 HB? is that right? they also have18 x 8 5-114.3 32 HB18 x 5-114.3 45 HBWhich one is the one i need, and will fit on my car right? Thanks

Asid from our mainfold, what manifold with the t25 bolt up to? will it bolt to a t3 t3/t4 hybrid exhaust manifold? It looks like it will but i really dont have any clue. I am doing some research for a friend. He wants to put a t25 on his honda and all of the manifolds i could find that are...

I am looking at getting RnR's Stock Looking Muffler. I have some of RNR's stuff alrdy and i trust Ryan at what he does with his work but he wont send me a pic of the stock looking muffler he sells.I was wondering if anyone on the boards has a pic of it so i can decided on getting it. Thank you.

I have had this problem since i bought my car, never really cared till now.My stock fog lights only come on with my highbeams and dont come on with the normal lights. I looked at the vfaq but their way is opposite of mine. I dont understand a single word of the vfaq either. I have absoulty...

I have a friend that just aquired a 6bolt engine. Right now he has a 93 Donor car. I have a 2g and really dont know to much about the 1gs. He wants to know if he can unbolt everything from the firewall on the 6bolt and put it in the 93 and plug everything back in. I told him i didnt think so...

Hey guys i took a trip down to Atlanta the other night in high hopes with my 14b i just put on my car. When i got there i dumped 2 gallons of c16 in my tank with the remaining spinx 95(about 3 gallons). I turned my boost up to 20psi and i started my runs.As i was doing my first run through...

I have a ported 14b with all of my supporting mods in place. I was wondering would putting a set of HKS 272's be overkill? I am eventually going with a 50trim setup. Just wondering if running the the cams on a stock valvetrain and on a 14b be worth it.

I am almost postive i lost my center diff. I am going to put it on jacks tomorrow to confirm this. My question is how long and hard is it to remove the center diff? I have the V-FAQ on it and it looks pretty easy if i take my time and do it right. Also any pointers anyone can give me? And one...

I would just like to mention that I am in no way affiliated with RNR. Everything that is reviewed in this post is my opinion and may differ with others that have the Exhaust.Okay with that outa the way. I purchased the exhaust on February 3, 2003. I did all of my ordering online and never...

Hey guys, Everyone is always talking about E.T's and how low they wanna get. Most people just get a big turbo and run race gas to get there. Well my goal is a little different. I dont wanna run race gas. I want to keep my car on Pump 93 and maybe 94-95 on some nights. I want this car to be a fun...

I have a black 97 GSX. I want to tint it. I dont want mirror tint i just want the plan dark tint. I was thinking 25% around everything and maybe a 45% on the front windshield or higher? What do you guys think. I wanna be able to see out of my car when its night time. Opinions?

What are the signs of a bad or going bad altenator? I think mine is going. If i put my lights on and then turn a blinker on the lights dim with the blinker. Or even when its parked and the brake light is on it dims a little with the idel. Anyone have any thoughts? I just put a new Acdeco in...

I know..i have read all of the tunning guides...they say get a cat back then exhaust.. Here is the problem tho. I want to get a RNR 3inch o2 elim turbo back exhaust..not just the cat back. I will be running with the same crappy 2g BOV tho. Should i invest in getting all the intercooler piping...

I just got done installing my Hallman MBC. I know i installed it right. I followed the VFAQ to the T and also made sure the correct labled ends went to the right places. 1 to the WasteGate and the other to the Boost Source.(BOV line to mani).Now here is the problem. I have the screw turned...

Okay...its come down to these 2 intercooler pipes. I either want Greddy's to go with my FMIC when i get it. Or get all Dejon stuff. Speaking of upper and lower pipes.What is the difference between the 2? They both will come out around the same price..after all the options and stuff i do. Any...

I just installed my K&N and it sounds kinda werid. I knew i would be able to hear my shity BOV better and hear the turbo spool. What is up with this loud sucking air sound? Is that normal? Its kinda like a water going down a tub. Kinda werid. I havent been able to really get on it but every time...

I just got done putting in my stage 3 CM's clutch. Question...I fixed the engagement to where it engages about 3/4 the way from the floor..or where its supposed to..anyway. I was wondering is it normal for a new clutch to freaking stick and pull in 1st gear..I swear no matter how much gas i give...

I was reading over the stuff and it said that i must have a Boost Gauge, Air Filter, and a exhaust before i can install this. I have the boost gauge and Air filiter..will it be alright if i just crank the boost up to 14 or so...or will it creep. Thanks.

I have alrdy decided on my Exhaust. I am going with the RNR 02 Elmin Turbo Back. All SS and a 4 inch tip. Now my question. I want preformance but i also want a good sound. I am stuck on the HI Flow cat or Test Pipe. Here in SC we dont have emissions so i dont have to worry about running a test...

I am finishing up a clutch install and when i took off the inner CV boot i had to break off the little bands holding the boot on the shaft.My question is can i just put on a screw clamp on it? Or will that throw off my alignment or balance because of the odd center of weight on one side...

I want to run BG Synchro shift in my tranny and transfer case when i get my clutch swap done. I cant seem to find it locally here. IE Autozone, Midway, Advanced, Car Quest. So i am going to have to get it online. I see Extreame sells BG Synchro 2. Is that the same stuff? Its freaking 16 bucks a...

My transfer case seal on the transmission side is leaking. Not the one where the drive shaft connects but the actually spline to the transmission shaft. Quick question. I need to replace it. The seal is only about 4 to 5 dollars more than likely..but how in the hell do i change it? Do i need to...

Alright i understand what boost creep is. What i dont understand is why people get it when they start to add exhaust componets..shouldnt that knock down the boost creep because its flowing better? I dont know maybe i am lost.Another question. I want to run a 3inch RnR o2 elim exhaust. Will...

I accidently bent in a couple in the center one. They havent been ripped just bent outa shap a little. I procceed to stick a small screw driver the width of the hole and straightn them out. Everything looks better they just arnt as prefect as it was. Will this affect anything alot? I cant take...

I just got done putting in my new water pump. Everything went back right.(had a little trouble with the TBelt tensioner). The car cranked and it seems to be running super smooth.Here is the problem. It now sounds really mean. Like a low rumble at higher rpms like 2000 and up. Its kinda...

I am a little confused as to where i should go next with my car. I am putting in my new clutch masters 2500 clutch next week. From there i am going most diffently get a intake. Then what? Should i get the apperance looking good? With some 18's with tocko shocks and a pro drop and brakes? Or...

I just got my Clutch Masters 2500 today. I plan on installing it next week. Question: I order a new throw out from the dealership thinking that my clutch wasnt going to come with one. Well it did. Should i use the one that came with the clutch or just use the one i ordered from the dealership. I...

Quick question..Every where i look about removing the water pump it says you have to take off the timing belt. But when i look at pictures of the block it doesnt look like the timing belt is even in the way. Can i do this without taking off the timing belt..or do i have to? thanks

I just did a thermostate and flush yesterday on my car. Everything went fine..i thought i had done everything right. I got a Autozone thermostate to replace the one that was in there. I put the long end towards the engine and sealed everything up. Well today while i was driving it..it started...

My clutch just went out on my car. My questions is how long will it take for a average person to remove and install a new clutch for the first time? Me and i my father are going to do this. We have all the nessary tools to do it with. All we have to work with is the V-FAQ and my manual. How long...

I just did a compression check and everything looks alright but one thing. Here are my numbers4=1663=135??????2=1601=157My Compression looks good but on 3. Now here is the question. What causes the low compression and how do i fix it. I know my piston rings are alright. I...

I was reading every where about buying new lifters..the prices i was reading ranged from 7-15 dollars.. Not to bad consedering i want to get rid of my lifter tick.I went to concelli to check their price..figuring that they would have some of the lowest prices..well i guess i was wrong. 28...

I know this topic had been beat to hell..i even did a search to find out if anyone has actually contributed that the ACT 2600 caused their CW..but to no avail i have had no answers..I know my clutch is starting to go..Now i have a 2g AWD. The big questions is 2100 or 2600. Everyone is so...

Have a quick question. Today i decided to De-Grease my car and wash it down good. Well when i was done i went to take it for a test drive and something werid starting happening.When i would go to floor it my turbo would spool and i would see boost but the engine would hesitate to go..then it...

Alright let me throw the disclamier out there..that this was my first time to the track EVER! so bare with me on my Reaction timesThis was done on my Stock 97 Black GSX. Everything is stock, but new pluges and some Accel wires and a boost gauge. Also with a clutch that is slippen a little...

Just got these from advanced..they are gapped .32 they look right. Are they?

anyone know a good website where i can purchase some accel 8.5's and some new 6's?

Hey guys..quick question..I am running everything stock..but a boost gauge. When i go WOT my boost goes to the normal 12 psi..as i am still going through the gear to say 6k my boost ways down to about 5psi..is that normal? I checked for leaks and this is what happens..I pluged off my...

I just built my leak tester and everything looks damn good. When i tried it out tho i couldnt hear anything being pressurized or any leaks.. I think the air was escaping out somewhere. You put the leak tester on the inlet of the turbo right??right where the black intake goes in? My car is...

I disconnected my battery the other day to clean the terminals..now when i plug it back in when i go to use the radio this thing comes up on it and says CODE. It is 4 digits and you can use the numbers to put in a code..can someone help me out with this..its very annoying i want to use my radio...

There was this bad ass link about how to measure CW in a AWD...it had pictures and everything.If someone could post that link. Also they use a little measuring looking device in that pic. Looks like a ruler of some sort with a little screen and numbers. What is it and where can i buy it? I...

I am looking at a 97 GSX..i like the way the 99 looks...I know its the same car. My question tho is. Is there any difference in the way a 97 looks from a 99. Where there any extra packages maybe avaliable that would give it a extra look? maybe like the sports package comparied to the regular...

the difference..is just one comes with the bottom end and the other comes with bottom and head? Am i right or wrong...

I am going to be looking at a GSX later on this week. The car is up in Virgina and i live here in Greenville, SC. So the drive is going to be a nice one. My question is..is there a easy way to check the tranfer case fluide to see if it is low or what not. I dont want to have a long drive and my...

I looking for a daily street/drag driven turbo. More Street then anything. I am looking for mid to low 12's. I see that some people have done this with the Big28. I like what i have heard from others about AGP so i plan on doing business with them either way. I talked to kevin at AGP about the...