if so let me know, thanks!

1 electrical oil pressure, NO SENDER, summit sells them for like 30 bucks. Also, 1 mechanical boost gauge. needs the nylon tubing, can be bought for like 2 dollars. They light up to factory gauge colors and look really good at night. OP Gauge goes to 100 PSI, boost gauge goes to 3 bar...

how much would 18" racing hart C2 wheels (single piece) be worth? Most are in good condition, one has some road rash, they have moderate tires on them but nothing special (Ventus).

if you have any shitty wheels sitting around or a stock 2g non eprom, or if you want to trade plus cash for dsmlink, let me know.

need a factory non eprom ECU and $400 cash for the dsmlink, aluminum wheels (factory or whatevers cheap that will cover AEM brakes) plus $650 for 18" racing hart c2 wheels and ventus tires.

if you have a 97-99 eclipse front bumper id be interested as well, but prefer a talon front. thanks! 815-621-6016

im sitting here and my car wont move. i turn the key and it just goes ZZZZZZ really loudly, thats it, i cant even tell if its trying to turn over. sounds awful. i dont know what it could possibly be or anything i can do to get home. any ideas?

need a 2g hood, doesnt matter what color. if you have one please let me know asap. im in boca raton. thanks

1996 Eagle Talon TSi AWD - No Sunroof - DSM Classifiedsany questions, want pictures etc just let me know!

i cannot for the life of me get the slave cylinder off. its only 2 12mm bolts, but the one i can reach is so frozen i cant move it at all, the other is like, directly under the crossmember, so how are you supposed to remove that bolt without dropping the crossmember?

i live in boca and i have to replace my slave cylinder, i think i have all the tools but just want someone to make sure i do it properly, as well as some other weird stuff going on with it. mostly slave cylinder...if anyone can come i can give you some money or buy you lunch tomorrow. thanks...

my car needed a new starter recently, so i replaced it. after about a week, it got harder and harder to start the car, it would crank slow etc, then it got to the point htat it wouldnt even start. so today i pulled starter, took it to autozone to get checked and it worked fine. took battery...

if you are capable of installing air conditioning on a DSM, let me know, i will pay you to help me with it. i have all the parts just need help getting it on the car and functioning. let me know!

is vacuum an indicator of your compression?say you have 2 motors, completely identical, one has a compression of ~100 all the way across and the other a compression of ~180 all the way across, will they still have the same mmhg vacuum, all other things being equal?

its a 1996 no sunroof talon tsi awd. fully built motor crower/wise, fully built head w/ hks 264/272 cams and c, 50 trim turbo (may be bad), dsmlink v2, 3" exhaust, fp intake mani.car is blowing blue smoke and i just dont have time to fix it, its 99% likely the turbo. im not sure why the...

cant figure this stuff out, now my car is smoking big time after i changed my valve cover. also my stewart warner gauge is reading 5-10 psi oil pressure at idle, 25psi oil pressure at highway speeds, this is with 2 separate senders, why would it read this low, is it actually my car having that...

great quality, they look great and match OEM gauges perfectly.cost about $150 shipped for both of em from summit. everyone i talked to said you really cannot get more accurate or higher quality than stewart warner, especially for the price. theyve been doing gauges for 40 some years.more...

anyone knwo if this would be possible, to relocate the giant cruise control box to somewhere less ugly but still functional? would require a longer throttle cable and extending the cruise control plug, but id like to get cruise back on my car...

why is it legal for companies to charge you for years on end, and as soon as you make a claim, they can charge you deductibles as well as increase your future rates? why do you pay in for years if as soon as you make a claim your rates go up?insurance might be the biggest scam this country...

i really need one...anyone know where i can get em? thanks.

if you have one let me know! 2g

STMDSM - Pigtail Fusethey offer 10-30amps but i dont know which to get for the stewart warner gauges i have coming...any idea?

all week my car has been running high oil pressure, so today i checked the oil. it was low so i added a quart and it was fine, but now teh car still sits at 40psi oil pressure at idle! what would cause my oil pressure to be fine one week then high the next week?just a week ago it was...

anyone have any clue what happens to stolen stuff down here?

i have a forced performance exhaust manifold, so no heat shield possible (atleast without a custom one) and my car is overheating. local DSM shop checked the car out and everything is fine, i may need better fans, but that is not even a fact. since i moved to miami and its been 95+ everyday...

i need to buy one and i cant find one anywhere...anyone have one or know where i can get one?

wish me luck, i have put maybe 1500 miles on my car in the last few years. spent all summer getting it ready (except paint) and now its time to move to florida. i leave tomorrow, i really hope i make it without issue in my car, the car drives pretty good im just scared something will break...

im moving to south florida soon, and i ahd these sitting around so i added them. one works better than the other, something is weird with one of them where it doesnt work as well, but here it is, sounds like a frickin airplane is taking off. i was running a 14" and a 12", but decided to add...

is there any benefit to wiring aftermarket fans to the battery? i am not sure if im getting full voltage to the fans in the car, it was an informal test but i have 2 14" mishimoto fans, one wired to teh car and the other sitting on my deck. when i hooked the fan to the car charger, it blew...

my inspiration for this thread is today im replacing the aftermarket black carpet i had with the stock grey. aftermarket carpet doesnt fit for shit, so stock it is. i used to paint all sorts of interior pieces too, now i just like the stock grey look (stock black if i can get the cash), the...

car is runng 220+ after i drive it for awhile, i cant figure out why. coolant pressure test holds 17psi without issue, theres no air in the system after running it for 45 minutes to get the air out and refilling it, tstat isnt the issue, radiator cap is brand new, im out of ideas, it feels like...

i dont want to take it to maaco but i will if i have to, unless someone here knows a shop or someone who will do it really cheap?

is it possible? its in the lower hose and i cant find one in stores, can i wrap it with anything to make it stable?

even in acc mode its stuck at 14.8 r 14.9! why!?!?!

still trying to dial my car in just in my driveway before getting it on the road and messing with it, but right now, whenever i press on the gas, the car will go to 17:1 or worse. my last log froze so i couldnt save it to show you what i mean, but here is one from earlier to give you an idea...

doing a boost leak test, cant figure out what the sound is, it almost sounds like a motor running whenever i do it, i have a 6 bolt in my 2g. anyone know what this culd be? thanks.

there is a few unused up by the old oil pressure gauge area, which most were from the stock gauge, but also some back by teh intake mani which i dont know what they are, they are soldered together, and sometimes when i touched them i heard like a motor running from the left top side of the...

car sounds like its trying to run, it fixed my voltage issue but now i dont know why it wont run? i put in the 90amp alternator from autozone, but what is the issue that would cause the car to barely run and die if you arent on the gas?

just searched for a bit and cant find anyhting, why is my cars voltage under 12 when the car isnt running, and when i start it it drops to almost 11i cant find anything to figure this out and i cant keep draining batteries, ive checked every connection i can think of and cant find any...

Part of my What Was I Thinkin' Blogs, I will post pictures of the process of all my updates. Pictures may not be the best but you will get the idea. Yesterday and today I emptied out the hatch, took out the washer fluid reservoir and moved all lines out of the way. When you do that, it looks...

ive got some exposed metal in some of the wires under the steering wheel from former clips and having tapped stuff in down there, how can i cover that exposed metal without electrical tape? can i use glue of some sorts or will it melt, or anything else i can use that i can apply on top of the...

My car has been worked on for I believe 7 years now. Initially bought it completely stock with little dreams to upgrade to anything too crazy too soon. Then it walked. So I had a car with a blown motor, and instead of doing the logical thing, I decided to build the entire damn car. And so it...

is this going to be absolutely impossible to re-install, i mean every single line and everything involved in the reinstall...anything i need to know before doing this? i have an ETS race FMIC and mishimoto radiator, is the condenser even going to fit?

here are some pics of primer we just finished. paint is within next 2 weeks, finishing up the wetsanding today.basically same its been the last few years, but im finally done with college and im home so i can work on it til its done. got some parts coming in the mail to...

so a long time ago i took the AC off my car, lines and all, and now i want to reinstall it because im a dumbass. any instructions or places where i can find how to do this, and is it gonna be a real bi*** to do or just basic reinstall the parts?

ImageShack Gallerythat sender there is the factory oil pressure sender right? also, is this a 90 housing or no?

wired up my 14" mishimoto fan to the stock harness. in front of the turbo the fan harness had 2 blue positive wires and 2 black negative wires, so i tied the two positive wires together and connected it to the positive of the fan, same with the negatives, and now it doesnt turn on. was that not...

the wire one comes from the harness by the radiator, the blue one stems from the altnator. i think the blue one is the stock oil pressure unit to the factory gauges...

some pics...black carpet wasnt too bad, im not done yet but its close, i hope the carpet settles better over the next few months.the front bumper only has 2 bolts holding it in so its dipping forward just a little, but its not bad right now. hard to see since its different colors from...