Old School RRE Downpipe with detachable test pipe with a cutout welded in....mated to an RSR catback. The catback has excellent fitment and is probably the quietest 3 inch exhaust you'll find.This is for pickup only and I live in Alma, CO....which is south of Breckenridge. This is a free...

Obviously used. There's a lot of heat marks on the surface, but it is actually in good condition with a smooth surface. It was paired with a Feramic disk and an OEM pressure plate.Looking for $60 shipped and paypal'ed.

In good working condition. Seals are actually fairly new and should work fine, but it wouldn't be a bad idea to replace them.Looking for $175 shipped and paypal'ed.

Uses the same mounting flange as the current 38mm gate. Comes with a large red spring which is good for roughly 12psi.The diaphragm was pinched when bolting down the cap. I didn't notice any issues with the gate, but I wanted to make that known.Looking for $100 shipped and paypal'ed.

Complete set of OEM mounts. Good condition. The front and rears have been window welded for extra stiffness.Looking for $50 shipped and paypal'ed.

Also need replacement bushings!

I don't have the oem part....I tend to let all that stuff go. I've thought about trying to find one actually, but I really like the feel of both bars. I guess I'll just get a stock sized ES bushing and enlarge it....

RM is no longer around and I have worn through a front bushing! Car is a 2G AWD.Energy Suspension makes bushings in the correct diameter(within .1"), however, they use a much thicker bushing overall with the idea being to use their brackets. But the brackets on the front of a 2G have a crazy...

Looked closer at the pics and the Thermal does have a smaller flange where it bolts to the downpipe. That's silly. Thanks for pointing that out....guess I keep shopping!

What bottleneck does the thermal have? I was under the impression it was straight pipe with a straight thru muffler??

Eviltsi....thank you for the straight answer and also for suggesting a solution. Also thank you for producing new parts for a somewhat dying platform....the community really appreciates it!Unfortunately, for several reasons, I'm not interested in running your downpipe. The part you made is...

So can you answer my question of what downpipe will work with your catback, other than yours?

It's too long. The DP and catback overlap by about 2 inches. I don't have a stock setup around anymore to measure against. I personally just think they made the break between their DP and catback in the wrong place, but hopefully I am wrong and somebody can chime in with a DP that will work!

I purchased STM's catback exhaust. They say that it will bolt up to any downpipe that ends in the stock location. Most downpipes are built to replace the stock DP and catalytic converter, so they would end in the stock location. I have an Apexi DP....it is not compatible with STM's catback and...

Hey guys...I've got a few parts I can't use!FAL shrouded dual fans w/ variable speed controller- $100 Tubular 2.5in O2 sensor housing...believed to be an old Punishment unit-$30 Autometer Phantom EGT-$40 1G BOV-$20 NGR Type-S BOV BNIB-$120I live in Breckenridge, but could gladly meet locals...

That tranny cleaned up nice!

What Seth said! That's what I was getting at....Most likely the problem is your intercooler is blocking flow to your radiator....I am assuming you ditched all the stock ducting in the front bumper when you installed it? That stuff actually did something. You need to get air forced through...

At a certain temperature, the ECU retards the timing advance....essentially lowering the power of your car because it is too hot.IIRC means, If I Remember Correctly. My motor blew last summer, so I haven't dealt with it all for a while, to remember the exact temperature where it becomes an...

What's left!Custom Cold Air Intake-$120 Connects to a 2G MAS, 4 inch pipe to go into the wheel well(you will have to cut a hole under the stock filter location), Velocity-of-Sound 6 inch Bellmouth/Podram, and a giant K&N filter.Extrude Honed 2G intake manifold-$250 I think this is...

That is too hot! Your ECU starts pulling timing at 206, IIRC.

If you are still looking, and this is a front sensor I assume?I have one with a few thousand miles on it...looks great. $50 picked up in Loveland.

Updated.....INTAKE~ Custom Cold Air Intake-$120 Connects to a 2G MAS, 4 inch pipe to go into the wheel well(you will have to cut a hole under the stock filter location), Velocity-of-Sound 6 inch Bellmouth/Podram, and a giant K&N filter.Dejon Intake pipe-$80 2 3/4 inch turbo side...

Thanks to all the people who have purchased things so far!There are still quite a few good parts left for the locals....

Confusion based on an offer from a flake.Are you interested?Sorry, not at this point.

List updated....INTAKE~ Custom Cold Air Intake-$120 Connects to a 2G MAS, 4 inch pipe to go into the wheel well(you will have to cut a hole under the stock filter location), Velocity-of-Sound 6 inch Bellmouth/Podram, and a giant K&N filter.2G MAS-$40 Completely unmolested, I can...

Click on my user name, then hit send a private message. Type away!

I never got one from you....give it another shot!

What's with all the foreigners in the Denver forum?

EVERYTHING must go! Car is a 1999 GSX, dark green, 104K miles on the chassis. I went 11.9@117 last year at Bandi and then threw a rod through the block at the end of September. This just seems like a good time to stop the financial bleeding and move on. These parts are great for people wanting...

I assume this is the stock 98 block and crank? What compression ratio are the pistons? How long ago was the block built?Thanks, Mitch

Hmmm....I would totally be into something like this, especially since it is in my town.Unfortunately, my car is down....for who knows how long!

IMO.....NGK's and OEM wires are the only way to go. Don't waste your money on knockoff Ebay junk wires that won't last.....

Why don't you try them both, since you have them, and find out which one works better for you?

I would go Raxles for sure...

Congrats! This was the first I have seen of this....It's cool to see that PFI is still doing stuff....everything seems to have slowed down quite a bit. Are we gonna see this thing on the streets of FoCo or what?Is the Dan you were talking about Dan Jones, or a different one? That guy...

I use the OEM stuff for the EVO MR 6-speed. It was recommended to me by Jack McGee(Jack's trans). I have been using it for a couple years now and have been very happy with it!

I was just gonna post that for future reference.Thanks!

I don't think it would have actually. Either way, I jumped the thread making gun. After some quick hands-on investigating, the larger one is the remote door lock receiver and the smaller one is for the alarm!

Yep...another one of these!Car is a 99 GSX. There is a black box with a wiring connector going into it behind the plastic next to the rear seat on the driver's side. It is down and slightly in front of the 6x9 speaker that goes there. There is also a relay? next to it with the part number...

I actually think this is one of the best warped tour line-ups EVER! Bad Religion, NOFX, Less Than Jake, The Souls, Streetlight Manifesto! Then old school acts like TSOL and Fishbone! I really like 3oh3 too....probably only because I am from the 303 though.But....I won't be going! It's...

Sorry for the off-topic-ness, but was that your car I saw at the Advanced Auto last week?

06 Legacy GT SpecB 273/500.....it's for sale though. :(

Don't give up on the 16G so easy! It has been like 8 years since anybody ran an 11 up here on one, and that was a tin canned 1G. Push it for all it's worth!

Cool!I went 116mph with a race weight of 3185lbs last night.....we are making very similar power!

Nice! I assume that trap speed was on that exact tune they gave you? What does your car weigh?Maybe I should throw my car on the dyno just for fun. I trapped 114 on a 16G a couple of weeks ago at Bandi, but my car is fairly light for a 2G. I'm gonna go back tonight and see if I can...

I'm almost 29....I bought the DSM when I was 21. Where do the years go!

I have had awesome luck with Porterfield R4-S pads....they work great and virtually no dust. I highly recommend them!

I remember reading somewhere that the 99's use 3G wheel bearings. My only evidence of this is when installing a TCE brake kit, the centering ring was not even close to going on. I had to enlarge it to get it to work. When I replaced my wheel bearings, I went to Napa, told them I had a 99 and...

Don't even get me started on Fat Tire.....I don't know many people who actually like it. It seems like it sells out of novelty or the trendies drinking it because it's "cool".That brewery, New Belgium, does make my favorite beer though.....Skinny Dip! It's their summer seasonal and is...

Bang for the buck wise, you can't go wrong with Evo Recaros. I picked up a pair locally for $500. They look good, are comfortable, and have plenty of lateral support. Of course, you are on your own as far as mounting them goes!