It feels like my cars given me more problems in the past two weeks than the past 2 years..Anyway, this ones simple compared to the rest of the issues its been giving me.I just installed a new valve w/ new gaskets, RTV and all that jazz (old one was cracked in the valley). In fear of...

My alternator (or so I think) was having issues so I replaced it. I had to get the car jump started because the battery was dead. When it first started, theres was about a 3 - 4 second squeal. Then the idle was fine for about a minute and suddenly there was a nonstop squeal...By this point...

Hahah thanks but no thanks ROFL. A monster Miata, though more reliable than a DSM, completely defeats the purpose of having a daily driver.

I'll pick up a set of wider pedal covers and see if I can get the brake pedal adjusted lower so that under heavy braking, it is on an even plane with the gas pedal.

LOL ignorance is bliss ROFL. The reason these cars have such a bad rep is because when you start making real power, expensive shit breaks. This can include but is not limited to blown motors, blown transmissions and the most random OEM parts breaking left and right.Leave your car stock or...

I think I will settle for the 10th anniversary edition Miata. It looks scores better than the normal ones and for $10k you can get a really clean one with ~50-60k miles. Last I checked, they were really reliable too!

... that wasn't funny at all...LOL

Hmm... definitely leaning towards a Miata or a Jeep. I really really want a BMW z4 but those are more in the $15-20k range. I'd be able to afford it but then it'd defeat the purpose of getting a DD to really go crazy on my GSX. I don't have the balls for a sport bike...

Anyone have suggestions for a non-DSM daily driver for $9-10k? I'm was thinking of a Miata. Reliability and mileage that isn't ridiculous is key.

Anyone have suggestions for a non-DSM daily driver for $9-10k? I'm was thinking of a Miata. Reliability and mileage that isn't ridiculous is key.

Anyone know where I can purchase pedal replacements that make for an easier heel-toe time? It's pretty difficult with the stock setup...Thanks!

Okay... Thanks for the input but what I really need to know is the differences between the MB Quarts PVF216 and the PCE216.Andrew

Anyone know anything about the MB Quarts PVF216? How do they compare to the MB Quarts 216?Andrew

Of course! As long as the motor is off... Then it's no different from a really small boxed off room. Aside from the metal all around you... and the wheels... and mirrors...The ~$500 came from...Fronts MB Quart PCE216 $169 Rears MB Quart PCE216 $169 Amp AudioBahn A6004V $135Obviously it's...

I compiled the list just through quick research. I'm sure some of the guys that posted can give more insight and experience based opinions :).

Thanks for the responses so far guys.What it means is that I appreciate and enjoy well reproduced music -- it's just not something I do in a car setting. For example, my headphone setup cost $300 for the headphones, $600 for the headphone amp and another $100 for the high-end cabling. I would...

Anywhere else I could give a shot?

I'm about to install my Wilwood big brake kit but realized I'm missing the 4 bolts for the conversion brackets (2 on each side). The specs for the bolts are 7/16-20 x 1.25 Long. Are they a special grade and do I have to order them from Wilwood/TCE or can I just get them from somewhere like NAPA...

I'm setting aside ~$300 for an aftermarket deck. I'm a pretty big audiophile, just not really the car audio thing. Can anyone give suggestions of what they'd recommend? It'd be great if it matched the interior of a 2g eclipse too! Double DIN suggestions are welcome as they'd fit better. Overall...

Don't mean to be rude but what in God's name would possess you enough to purchase an ebay 16g???? The fact that it's 400 cheaper than the quality ones should be enough warning in itself. Some things are too good to be true.Good luck though =(.

No one?Well, I did some research and...1.) http://www.olympicpowdercoating.com/powder-coating/contact.html 2.) http://www.ocplating.com/ 3.) http://www.crestcoating.com/aboutpg.html 4.) http://www.centralpowdercoating.com/applications.htm 5.)...

Hey guys,I'm located in the LA area and was wondering if anyone know of any local, reputable powder coating shops. I'm planning on sending my calipers in to get done and would like to avoid shipping them out if possible.Thanks!

If you have any kind of basic car knowledge at all, DSMLink is really really easy to pick up. The only real learning curve is learning what things are (i.e. knock, air fuel ratio etc..). Other than that, there's not much more to it.Also, you're given access to the exclusive DSMLink forums...

My car was attacked by another car while it was parked in the parking lot. I polished out all the scuffs and scud right away. Not sure how many people have experience with body work but anyone able to throw some estimates on what it would cost to fix? You can't see it in the photos but its also...

Everything was replaced with OEM parts as part of the 2.4L built by RRE.It wasn't the harmonic dampener... I just tightened the tensioner bolt a slight bit more and all the squealing went away.

Defiant,Does this mean that my first alternator was fine? It passed the tests at Autozone but I replaced it anyway. Here's how the battery first died:There would be squealing but only very lightly and in 1st gear in the lower RPMs. After that, there was absolutely no squealing and...

My alternator (or so I think) was having issues so I replaced it. I had to get the car jump started because the battery was dead. When it first started, theres was about a 3 - 4 second squeal. Then the idle was fine for about a minute and suddenly there was a nonstop squeal...By this point...

RRE was giving out their shirts for free?

Can someone please direct me to LINKS where I can purchase an aftermarket steering wheel and mounting bracket?For the wheel I'd prefer Momo or Spearco and a "easy-remove" bracket that allows the steering wheel to come on and off would be great.I've checked all the big players (RRE...

... and Speed Element :) .You're right, GST and EIP completely slipped my mind.Ian, listen to unlmtdndeavor, he's a smart guy. Give FFTec a call or come in with me just to check the place out.

Ian Theyer?!?Haha what's up, I'm heading back to tino tomorrow till Sunday. Go to Full Function... you won't regret it. Sean's pretty amazing and it'd be good for you to get to know him early. You could roll with me, I'm heading there on Thursday or Friday. The only other place with an AWD...

I'm up for it. Is it just a DSM meet or a free for all?1. yellowkyd278 - Andrew Yeohps - The South Bay refers to the Bay Area in NorCal. You could get stabbed for using it incorrectly. Stabbed!!! :toobad:Haha, just kidding. Can you provide an address to meet?

I'm from the Bay Area but go to school down here in LA. Anyhoo, I've got a wideband and GM3Bar that need to be put in but I don't have the tools down here!I've got the parts and the bung for the o2 sensor will already be tapped. Anyone able to lend me a hand sometime this weekend? I'll be...

Like everyone else, I'd have to agree.Shops are great for doing internals -- installs with much more catastrophic consequences if things aren't done exactly correctly the first time.They're also great if you hate to wire and want something to come out nicely mounted.Aside from that, you...

Yeah, he's talking about the JDM Galant knuckles / evo8 switcheroo.Anyhoo, any more suggestions? List is on first postAndrew

Yeah, he's talking about the JDM Galant knuckles / evo8 switcheroo.Anyhoo, any more suggestions? List is on first postAndrew

Are the 2 10" subs just the ones that go in the door? I've got nothing against subwoofers, I just won't want a box -- whatever the size -- in my hatch.The reasons I didn't want a deck is because I like the stock look. All the decks out there seem to be flashy as hell... I'll check out the...

I'm sure 99% of people reading this thread will agree with you. But that's not the case in point everyones worried about.Say you were pulled for a taillight and you had an after market exhaust. It's the one mod you can't really conceal and that stands out big-time to cops. So say he pulls...

Are the front and rear kits Todd sells for our cars (i.e. the 13 x 1.10 front kit) the same as the brake kits Wilwood sells on their websites??

You'd be suprised what hard work can do. I earned well around 10k when I was 18. A part-time job during the school year brought in ~$5000 and a solid summer internship brought in ~$6000.Granted if I didn't consume anything but car parts it would have been possible... but I know of other...

I don't mind if people get ####ed for street racing. Well, I do mind but I know as well as everyone else the street racer isn't the most innocent soul out there...But when their fun leaks out and ruins it for everyone else... that's when it sucks. If I got pulled and booked because some cop...

Here's the deal. I've got $600-$700 budgeted for audio. I'm not looking for subs that'll shatter windows as I roll down the street. In fact, I'm not looking for subs at all. I just want a set of good speakers (I'm assuming all replaced) and the proper support to power them while staying within...

I'm trying to find how deep I need to go in brake upgrades for my applications. I drive a 2.4 evo16g making the usual 330 - 370 whp (dynojet)... maybe a bit more but you get the idea.The car is primarily a daily driver seeing -- 85% of it's life is on the roads. I auto-x occasionally but by...

It's simple..1.) Don't use stolen partsTheir cars were only crushed because of the stolen parts. No stolen parts = no crushing...

I was under the impression from a previous post that you were irrationally set on building the 420a just because it's something you wanted to do. If you want to be sensible though, dump it and wait till you pick up a gsx or at least a gs-t before you start building. N/T cars made turbo are just...

Over the summer, these two brothers went to Sean with the 420a's and like $12,000 each. He basically went to town with them and I'm sure their motors were built. Since it seems Rob's did the motorwork the answer to your question is no, I don't think it matters.He's right, you would see some...

oh cool, I had no idea.

If you're going to make the trek all the way to Hayward I'd recommend FFTec over Rob's. Rob's is great but FFTec is undoubtedly the best DSM specialty shop in NorCal. They'll build your motor anyway you want it and it's basically as good as it gets. Plan ahead though, their wait times for motor...

I've been trying to figure out the source of an electrical drain. I had the viper alarm disabled and I put in a new battery. After driving from LA to San Jose (300+ mi.) I left the car in the garage to see how long it'd take to die. On the 6th night, I played about 4 songs on the CD player and...