Hey guys, well I went to the track tonight and ended up hitting my personal best of [email protected]. This is in a full weight 2g on 91 and meth (mods in profile) I got about 8 passes, with most passes being a really low 12's with traps of 127 to 128mph. I was having traction issues so I ended...

I have for sale a Blitz Spec-S electric boost controller. Works great, and comes with everything needed to install.Here is a description of the features it has. But the link is for the newer style black model. All the features and description is the same as the one I am selling...

I did a quick pull in 2nd gear. The A/F ratio is pretty safe but I still end up getting knock. I can't really figure it out. Can someone give me a hand? This was on 91 and dual methanol nozzles m12 and m7 at the throttle body. Could this be rich knock?The second log has a bit more fuel taken...

I am in the process of doing a 6bolt swap and was finishing everything. I have everything wired in, but cant figure out where this plug goes. Can anyone help?Thanks

Well I have my old stillen front bumper for sale. Its polyurethane and has been modded to fit a fmic.Asking $150obo<img src="http://www.dsmtuners.com/gallery/files/3/7/6/7/2/eclipse2.jpg" alt="97 Eclipse" /><img...

I'm actually posting this for a buddy of mine who has been recently hearing rattling noise from the front end of his car. After diagnosing it for him I tracked the rattle/clunking noise to his stoptech 2 piece rotors. You can only hear the sound when he hits bumps, yet when you press on the...

Well with the great results I was having with meth injection at the throttle body with a m14 nozzle I decided to add a m3 pre-turbo nozzle as well. After reading a thread written by turboglenn I decided to try it myself. Here are 2 logs of 3rd gear pulls without and with the pre-turbo meth...

I just reformatted my computer and lost photoshop or else I would have done it myself. But could someone please photoshop the bottom of my front bumper, where the fmic is to black. Basically the bottom bumper area around the fmic.For both pictures please!Thank you!:thumb:

I did two 3rd gear pulls. Looks like the second log is better then the first one. After the first pull I zero'd out the fuel adjustments and it looks like it got rid of some of the knock. Both runs were done on 91 and on meth (heet bottles).I know I dont have a wideband but what A/F ratio...

Because of state budget cuts!State of California, Dept. of Consumer Affairs, Bureau of Automotive RepairWhat do you guys think?

Well as of right now I am in Japan, and I know people use JDM Galant knuckles to run Evo Brembo's on 2g's. So wouldn't it be possible to run a set of Evo brembo's on a 1g using a set of Evo 5 knuckles? Since the 1g's use 130mm mounting tabs for the calipers (like the 2g's) while the Evo's us...

I am putting together a awd tranny that the original owner before me disassembled and was wondering which way the 5th intermediate gear when back on the transmission.Is this the correct way? Or should it be flipped the other way? I ask this question because I have seen in another guide where...

My mods are updated in my profile. I am running a 50/50 meth and water mix. And a pte 5031e at 23psi in this log.I installed the meth kit recently and I have tested to make sure it works. But it doesn't seem to make a huge difference in knock or the amount of boost I can run.My log doesn't...

I have a vr4 pump, PTE 780cc and a dsmchip that is programmed for 780's that I have. When I am cruising my STFT, and LTFT seem to be way in the negative. The car does a lot of popping through the exhaust and I can't seem to figure out the problem? Could it be that my stock fpr is going bad or...

I lost this bolt while working on my car and was going to get a replacement bolt for it. So I was wondering what the thread pattern was? Or if anyone has an extra one could you pm me.ThanksThe pictures were taken from the gallery.

So here is my problem. I am trying to run Palm 'n' Stein on my IIIc to do a couple logs. But every time I try to connect I get a error code saying "no rev". Even when I go to look at my engine codes, the same error pop up. I have tried using different cables but still the same outcome. I even...

Big 16g at 20psi. Tell me how it looks?The first pull. By looking at this, it looks like I'm getting knock from 6312 and up, correct?RPM----O2----Timing----Hz 2820----0.94----12-----8.73 3296----0.91----7------14.71 3868----0.96----6------19.29 4500----0.97----7------22.25...

Hey guys, well here is the story. I just got a used Maft and after some inspection I found that one resistor is not connected to the board. And was wondering if this was normal. If someone could go out and look at their's it would be great.Here is a picture of what it looks like.And...

Well as of right now I'm in Japan and found something pretty cool. Its made by Bee*R and its a rev limiter and stutterbox device which I was planning on purchasing. Its alot cheaper then dsmlink or even msd dis-2.Well as I was looking at the manual online and the wire install doesnt look...

Well... if you plan on running from the cops at least wear a seat belt.http://amerisurp.net/images/1-thrown_from_vehicle_fatal.wmv

Here is the link. Well he deleted his posts and everything, but if you scroll down and read others peoples reply to it you will understand whats doing on.:tease: http://www.svtperformance.com/forums/showthread.php?t=259018OWNED!!! lol

Well, I was looking around and found some Apexi springs for sale in Japan. I wasnt aware that Apex made springs for our cars. Anyways, I was just wondering if anyone had any experiance with these springs?Thanks:thumb:

I searched but couldnt find much on the topic. Since I have a chance of getting some Evo3 cams for a good price, I was just wondering if they would be an upgrade on a 2g?Thanks

Hey, so I finally got some larger injectors (Evo 560cc) and I was planning on tuning it. So I need your guys help.Setting on High AFC: 1k -13 2k -13 3k -16 4k -15 4.5k~7k -16Log: Big16g, 17psi. Fuel: 560cc/ VR4 fuel pumpRpms: 2500 O2: 0.96 TPS: 96 Timing 22 Rpms: 2612 O2: 0.96...

Well I log this tonight, running about 14psi on my big16g.Rpms: 2100 O2: 0.18 TPS: 81 Timing 25 MPH: 29 Rpms: 2204 O2: 0.94 TPS: 96 Timing 20 MPH: 31 Rpms: 2444 O2: 0.96 TPS: 96 Timing 14 MPH: 32 Rpms: 2704 O2: 0.96 TPS: 96 Timing 10 MPH: 37 Rpms: 3000 O2: 0.97 TPS: 96 Timing 9 MPH: 40...

Well I just installed my vr4 fuel pump and everything worked out, until I tried turning up the boost a bit. I'm on a 14b and use a blitz EBC, so my first idea was maybe the boost controller is messed up. So I disconnect it from the actuator to see if the boost will go any higher. Well it didn't...

Can someone please chop this ViS invader hood on to my car.Here is my car.Thank you for your time!

Ok so here is the deal, I have someone that was thinking about buying my supra intercooler off me for $180 or so. And I was thinking why not sell it and get the johnnyracecar 6" intercooler. The 8" looks good too, but I really don't want to trim my bumper support (just in case of an accident/and...

Hey, I was wondering if someone could add a FMIC on this picture.Can someone lower my car. And make another picture with it lowered and FMIC.Thanks!

Hey, I was wondering if these cracks in the 14b I have installed be the cause of slow spool time? I checked for boost leaks and dont seem to have any. Can anyone tell me why it takes so long to hit fool boost?As you can see the turbo looks really good, so should I just go out and buy a new...

Ok so today was a really screwed up day for me :cry:. I got another ticket, but this time it wasnt for speeding, it was for barely going over the double yellow (I wasnt even over the double yellow it was more like on the line). The sherif just made a u-turn and pulled me over. Well my question...

Does anyone have pics of Taylor 10.4mm spark plug wires?Thanks in advance

Today while comming home from school I got onto the freeway. And while getting on the free way i floured it. But then all of a sudden around 13-14 psi I felt like a repeated hitting feeling and power loss as the boost will drop then increase, then drop over and over. I dont know how to explayin...