I've found a few pictures online of this swap, but not much info, wondering if any of the people that built them are on here by chance, or anyone on here. Seems like it would be more popular since they make a bellhousing adapter and flywheel to attach the 4g63 to the 5 and 6 speed rx8...
Anyone built a good working rwd oil pan themselves? I've been away from these things for nearly 10 years and honestly don't have a clue who makes what or who has done what. I've been looking around a bit and saw the outrageously expensive magnus pan, but not really and pics of what other's have...
So i have wasted the last few hours arguing with a complete moron about something on facebook on whether the power transistor is what controls the spark. He doesn't understand that the power transistor unit is the same thing as an ignition control module, just a different name in the mitsubishi...
I am looking for a little information on boat trailers. I bought an 88 bayliner capri 21 foot boat for a very cheap price but the trailer that it came on is for some different type of boat. The step on the back is at head height and the back of the boat is about a foot taller than my head. It is...
So after extensive research for a replacement upper timing cover that doesn't cost 60 dollars i made a discovery. Dorman makes a replacement for the hyundai, 1.6, 1.8, and 2.0. It is identical to the 1g cover, and here's the kicker. They are 15 bucks brand new from rockauto.com. Here is a link...
Alright guys, i've got a 2g universal o2 sensor with no plug on it. It came with an o2 housing i bought a while back so there were no instructions. It's been so long since i've installed one of these universals that i've forgotten what colors on the o2 sensor harness go to which on the harness...
I was wondering if anyone has any first hand experience with this. I've got a 7 bolt 4g63, and the spyder 2.4 5 speed transmission. I am wondering if the flywheel diameter and thickness is the same as the turbo fwd flywheel. I know they use the same clutch, but before i buy a flywheel for the...
Alright guys, i am going to be working on a 90 galant gsx. The guy wants me to swap the 4 lug hubs for 5 lug hubs. I have heard multiple times that they share parts with awd dsm's. I have parts from my awd dsm that i am parting out. Does anyone know what all parts they do in fact share. He needs...
So i am building my head up, crower single springs and titanium retainers, new revised lifters, ffwd 272 cams. I am wanting to turn this thing at the most 8 thousand rpm's, how do you guys think the stock valves will hold up with this kind of rpm?
I have had this ongoing issue with one of my cars since i got it. I always assumed that it was the brake booster.To make a long story short, i have to push the pedal down real hard to be able to stop, they don't lock up at all. IT feels as if the booster doesn't work properly, and that it...
Alright guys, i have been searching for another case of what i am going thru right now, but with no luck. This has been going on for months and i havn't been able to get a good tune on this car yet. I Don't ever have any problem tuning my cars that i have had before, or friends and customers...
So i just got my 6 bolt swap done, and i am having some negative results. When i went to built my 6 bolt, i bought a suposid balanced crank that i paid like 250.00 for, i got it and it had some holes drilles in the weights so it was apparent that it had been balanced. I used 6 bolt rods and new...
Anyone know the factory spec for the big end of a big rod. I am just double checking the machinist, and none of my books or cd's have the info. The bearings seem a little tight, i just want to make sure that they are correct. Thanks
I need a little help here, i am using some 1g rods with 2g pistons for my recent motor in my car, i took the rods and pistons into a local machine shop to have the small end of the rod enlarged 1mm to fit the 2g pistons on them, well the machinist told me that it wouldn's be a problem, so i take...
Alright. I will try to explain this so that it makes scense. I was pulling the lifters out of my 2g 7 bolt head, and they were stuck in there with carbon, i had to pull them out. Now after i pulled them out, the tip will pull out an extra 2-3 mm or so on about half of the lifters. IT just seems...
I ordered a set of arp's for 6 bolt rods, and got these, they aren't for a 6 bolt, but there is no way that i am going to get my money back, so i need to know what to sell them as.
Does anyone know of an aftermarket fuel guage that will work with a stock 2g sending unit, or by chance what the full and empty resistances are? Thanks
Hey guys, i am pretty sure that i know the answer to this, but are there any differences in axle length in the driver and passenger 3 bolt rear axles. Thanks
Hey guys, i am looking for a mild power adder to a non turbo 4g63. I work on the turbo motors quite frequently, buy i have not yet tried turbo cams in a non turbo motor. Definetly seems that it would add a little power uptop. Anyone here ever have any experience with running turbo cams in a n/t car.
Hey guys, i am selling an automatic trans from a 91 tsi fwd, i tied to weigh it on my scale and get 180 without the converter, sounds kind of heavy to me, doesn't feep any heavier than an awd 5 spd tranny which is around 130. Does anyone know roughly what they weigh. I am trying to give the guy...
Hey whats up guys, i just got a 2g datalogging cable, and i am looking for some software, i tried the palmnstien shit, and none of it works, (http://students.db.erau.edu/~szabafab/stein/) i need to find something soon, so if anyone knows of any other free software, please let me know. Thanks
CHECK FOR LEAKS. 90 percent of the time that is the problem, and there are always 20 new people asking everyday what is wrong with their car. If it isn't pulling right, lacking power, studdering, not running right, chances are you have a boost leak. It seams like some people are in denial or...
Alright guys i am building my 6 bolt, and will be doing the swap next week. I have a few questions about the swap though. I am using the 2g head and fuel injection, therefor i will be using the 2g thermostat housing. Now if i use the 6 bolt water pump, will the 2g waterpipe match the 6 bolt...
I am putting a 6 bolt in my 2g and using the 2g head, intake and throttle body off the 2g. I already have the head bolt holes drilled larger to accept the 6 bolt head bolts. Now my question is by the looks of it i am not going to be able to use a 1g cas after i pop the plug out, maybe not, just...
Alright guys, i am a big 1g guy and i now have my first 2g. I am doing a 6 bolt swap and i am blocking off the egr. Now i know that the 1g cars with the obd1 computer systems didn't throw any codes after taking all the emission controls off. Is this true for the 2g also being that it has the...
http://www-odi.nhtsa.dot.gov/cars/problems/complain/complaintsearch.cfm .This is the site to post the complaint to. I know that everyone thinks that there will not be anything come of it. But i will let everyone in on a little secret. I sat up last night and all of today, and looked thru...