The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Morrison Fabrications
Please Support ExtremePSI

Search results for query: *

  1. 1995 GST for sale
    Sold

    For sale 1995 GST for sale

    All the details are on my vehicle info for my profile. I just bought the car a few months ago, there is a title issue with it, the previous owner signed the title but never put it in their name because they couldnt smog it for California, but i do have Bill of Sale from him to me and can make...
    $2,000.00
  2. eclipsek17

    '95 GST

    Started tearing down the engine this week to fix the head gasket, but first I wanted to pull the ecu because it seemed like it had been chipped and tuned a little already because I noticed it had a 2 step and the MAF has been removed completely. After pulling the ecu I was happy to see that it...
  3. eclipsek17

    '95 GST

    Done a few little things to the car over the past few days, cut the front bumper out and repositioned the intercooler and fixed part of the front bumper that was hanging, removed a viper alarm, and removed the cruise control components and replaced them with a straight throttle cable. Also I...
  4. '95 GST

    '95 GST

  5. eclipsek17

    '95 GST

    This is the Build Thread for My Blue GST. Reply below.
  6. eclipsek17

    AWD Conversion/Swap Guys Enter Here - Advanced. [Merged 2-07]

    http://www.dsmtuners.com/threads/halfshaft-bracket-year-differences-ac-mount.298124/That link has a lot more info about it.
  7. eclipsek17

    AWD Conversion/Swap Guys Enter Here - Advanced. [Merged 2-07]

    It has been a while since I did my swap, but there is a place I found that sells a spacer specific for that. I will try and see if I can find it and if so I'll post it here. It was only like a $5 or $10 piece, but washers should work just as good though as long as it is around the same dimension.
  8. eclipsek17

    Steering Clicks When Turning Left

    usually cv axle clicks are a little more than just a couple clicks though also. I was thinking it may be a cluck but is being described like a click. I was leaning more towards cv axle as well though, if it is a clicking noise
  9. eclipsek17

    Steering Clicks When Turning Left

    Also with the front end of the car jacked up, trying moving the wheel around in every different direction and see if you hear the noise or notice too much play.
  10. eclipsek17

    Steering Clicks When Turning Left

    You have ball joints on the outer tie rods.It would be best to visually inspect it, jack the car up and take a look at your front suspension. Check the cv axles too, when they start going out, sometimes they will make a noise when you are turning as well. Check for outer tie rod boots blow...
  11. eclipsek17

    Charging issue, charges fine when i give gas

    The color of wires would help a lot if you can get them for me.As I was driving home I checked the voltage regularly and when I was going through town it was between 13.9 and 13.7, highway was 14.0 and 14.2, and idle at stops was 12.7 and 12.9. When I got home I turned headlights off and...
  12. eclipsek17

    Charging issue, charges fine when i give gas

    Bogus, the car used to charge at idle. The voltage when a car is running should be between 13.5 and 14.5 volts. There is no way this battery is too small for the car, I have a 1000cca optima red top battery.Fastfred, I will try the print out from all data you provided and see what I get. All...
  13. eclipsek17

    Charging issue, charges fine when i give gas

    I have been and still am driving the car everyday with no issues, but the voltage on the system always drops to battery voltage when the car is idling. A couple of times, after sitting in traffic too long, I noticed the car losing power from running off just the battery too long, but have just...
  14. eclipsek17

    Charging issue, charges fine when i give gas

    What color wire is the G terminal?Already did load test, no issues with battery and alternator works perfectly after rpm is past idle a litttle. Have a new optima red top battery with 1000 cca and it is ran with gauge wire I have on it is bigger than what most people have used when relocating...
  15. eclipsek17

    Charging issue, charges fine when i give gas

    I thought alternator also, but I just had it warrantied because I thought it was that, but I still having the same issue with the one I just put in. Wouldnt be the first time I have gotten bad alternators brand new, but I am just thinking how unlikely it is also.
  16. eclipsek17

    Charging issue, charges fine when i give gas

    Is that supposed to be like a 5 volt reference circuit just to turn the alternator on or off then? Or is it a 12v circuit? If it is a 12v circuit, would it hurt to make a regulated bypass for it?
  17. eclipsek17

    Charging issue, charges fine when i give gas

    I think I swapped to the 90 amp alternator a while back when I relocated the battery.I was trying to find a wiring diagram for the alternator, but they are all just the basic parts of the system, fuse, relay, battery, etc. Doesnt the ECU also have the voltage regulator in it as well? I have a...
  18. eclipsek17

    Charging issue, charges fine when i give gas

    Belt is really tight, still doing it. Was doing it with the last alternator I had in too. I am able to drive it around, but if I am in traffic too long or at idle too long its starts pulling from the battery and wanting to die unless I give it gas. If battery was relocated to the rear should I...
  19. eclipsek17

    Charging issue, charges fine when i give gas

    I tighten the belt some more when I get home, seems tight though but that does make sense. It is an orielies alternator.
  20. eclipsek17

    Charging issue, charges fine when i give gas

    One problem after another with this thing and it is always some weird problem that takes forever to figure out it seems like. So I just put in a new optima red top battery about 2 months ago, just swapped the alternator today, fuses appear to be ok, but for some reason the car is only charging...
  21. eclipsek17

    Misfire in all cylinders

    Also check ignition control module. Just had similar problem but my ecu ended up being the problem.
  22. eclipsek17

    need help soon car misfiring and stalling

    Yea I am really happy to finally get that oil leak taken care of, it was embarrassing. Did so much to clean up the engine bay and make it look nice, just to have the belts throw oil everywhere. I should have replaced it a long time ago, but after working on other peoples cars all day, I kinda...
  23. eclipsek17

    need help soon car misfiring and stalling

    Thank you all for helping, i was getting stressed out about it and over thinking everything.
  24. eclipsek17

    need help soon car misfiring and stalling

    I figured it out, my ecu was causing the problem. It looks like it was sending too much voltage to power transistor and was some how causing the 2 cylinders not to work. I was focused on the power transistor as being the problem, and did replace it but it didnt help at all for this one. Just got...
  25. eclipsek17

    need help soon car misfiring and stalling

    Just got done changing crank sensor and fixing all my leaking seals, started the car up with no luck. It is still misfiring really bad and stalling. It is running only off 2 cylinders (cylinder 2 and 3). I can disconnect cylinder 1 and 4 and it doesnt effect anything, it acts the same with them...
  26. eclipsek17

    need help soon car misfiring and stalling

    Going to be working on this all day and probably all night until it is figured out, so I will be checking back on here for help throughout the day every so often. I know worse case there is a chance my ecu could be messed up as well. Also noticed and was wondering when the car is put to the on...
  27. eclipsek17

    need help soon car misfiring and stalling

    All intercooler piping, couplers, and vacuum look good. I was able to narrow my search down a little with an rpm drop test and realized my problem is centralized on cylinder 1 and 4. It seems like cylinder 2 and 3 are the only cylinders working at the moment. I tried swapping coil pack from the...
  28. eclipsek17

    need help soon car misfiring and stalling

    No, would that causing stalling at idle? I could understand that being an issue while driving but how could it effect idle?
  29. eclipsek17

    need help soon car misfiring and stalling

    How do I test all of those? What voltage or resistance should I see? Car will not stay running long enough to test while running.
  30. eclipsek17

    need help soon car misfiring and stalling

    Also was reading through some forums and was wondering if my wire tuck could have anything to do with it. I did a wire tuck about a year ago, after most of my wiring caught fire and i had to replace the whole harness. Since the tuck was done, i have drove the car for about 4 or 5 months with...
  31. eclipsek17

    need help soon car misfiring and stalling

    I have a 95 eclipse gst-x, with a 98 black case ecu and 98 cas. When I start the car, fires right up, it begins misfiring on all cylinders, sounds like is it constantly firing and then after about 30 seconds it stalls. My tach is also fluctuating, it will read idle speed then at times drop to 0...
  32. eclipsek17

    Rebuilt engine break in question

    Cool, well hopefully I am good until I get some money to drop in this again
  33. eclipsek17

    Rebuilt engine break in question

    I cant afford to open this engine back up right now though. I spent everything I had just to get it working again so I could have transportation to find a new job. I haven't been paid in a month at the shop I am work in at now.
  34. eclipsek17

    Rebuilt engine break in question

    How do I do a leakdown test? I am not familiar with that. I did a wet compression test and compression was good across all cylinders, only like a 20 psi difference from 190 to 210 psi.
  35. eclipsek17

    Rebuilt engine break in question

    7 bolt pistons, with new Mitsubishi rings, I didnt gap them, is that where I messed up? The head was resurfaced, new cams, new lifters, but that was it. I was on a very tight budget and had to get my car running again. I had the block surfaced and honed at the machine shop. Vacuum on cold start...
  36. eclipsek17

    Rebuilt engine break in question

    Everything sounds perfect, no noises at all. No leaks, except one I am trying to figure out with my transfer case. But I did a compression test just to see where I was at and it didn't seem to good, unless compression gets better as rings set. I have from cylinder 1 to 4, 150, 140, 155, and 170...
  37. eclipsek17

    Rebuilt engine break in question

    Thanks for the advise. Just nervous. I plastigauged and gaped everything to exact specifications from all data, but I am just still nervous and hope everything is broken in properly.
  38. eclipsek17

    Rebuilt engine break in question

    Also is it bad if I wasn't able to keep it at a steady 2000 rpm while idling at first start up? I had a disconnected vacuum that I was unaware of and the idle was fluctuating between 2000 and 3000.
  39. eclipsek17

    Rebuilt engine break in question

    Had a quick question, I know there is a million engine break in posts but, I have been reading throughthem and have not found an answer to what I am looking for. I just rebuilt engine from block up, new bearings, rings, etc and I put non synthetic 10-30 in my car and let it idle at 2000k rpm...
  40. eclipsek17

    steel nitrite rings for oem 7 bolt pistons

    I was thinking of running the felpro permatorque gasket, what do you run?
  41. eclipsek17

    steel nitrite rings for oem 7 bolt pistons

    I was thinking of running the felpro permatorque gasket, what do you run?
  42. eclipsek17

    steel nitrite rings for oem 7 bolt pistons

    I am still playing with turbos also to find one I really like
  43. eclipsek17

    steel nitrite rings for oem 7 bolt pistons

    I want to keep oem crank, as I have heard some good things about it, but for right now I am just rebuilding to get my car back up. I blew the rings in my engine. Basically just doing an oem rebuild for now, with arp head studs and mls gasket while I build up the parts to rebuild the way I want...
  44. eclipsek17

    steel nitrite rings for oem 7 bolt pistons

    I was referring to the other guy about piston and rod setup I am wanting to go with
  45. eclipsek17

    steel nitrite rings for oem 7 bolt pistons

    Right now I am aiming for 400, but my overall goal is 600hp range. Right now I am only running an evo 3 16g. I was going to go with a hx35 next though.
  46. eclipsek17

    steel nitrite rings for oem 7 bolt pistons

    I eventually want to go with wiseco hds and some eagle h beams, but for right now I cannot afford that setup.
  47. eclipsek17

    4g63 Mechanic Needed

    Sorry took a while to get back to you. Labor hours for a whole rebuild are around 30 hours of labor. My shop price here is $80 an hour but when I get jobs I like I only charge $60 an hour. Go from there so you can estimate a price so you dont get ripped off.
  48. eclipsek17

    steel nitrite rings for oem 7 bolt pistons

    I was told by my machine shop yesterday that for boosted engines steel nitrite rings were the best direction to go. They said they have built several 4g63 engines and said that with the arp head studs and mls head gasket oem everything else I could safely boost 20psi, but he did recommend me to...
  49. eclipsek17

    What did you do to your DSM today?

    Installed a ss clutch line, finished cleaning all the carbon buildup off my old pistons, and dusted off the body and rims a little from it sitting for so long.
  50. eclipsek17

    What is this picture

    Looks kind of like the bracket on the intake manifold used for pulling the engine. But I could be wrong because it looks a little longer than that bracket.
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top