I am currently having a few small issues with car mainly while slightly on the gas the o2 sensor does not cycle even though it is in closed loop... but on decel it does cycle like it should.... Is it correct?Also the car being an automatic I had my fiance put the car in drive and from there I...

Searching for an answer to my mystery battery drain.... Unplugged the negative from the battery and put a test light in series with it... Following luv2rallye's tech page. And I have 1 nasty draw....As I pulled all the fuses from inside the car first nothing turned the light off.... Went...

Bought a new car last week and she is an auto.... Still learning about autos and what now but I noticed on the headliner it has an auto temp display... Looked in the fsm and this is what I found....What is the temp at which it lights up or anything? Yes I know I will be installing an...

Last Sunday I purchased a car from a guy in New Jersey. He also gave me a box with a bunch of spare parts and I happen to find a throttle body I have never seen before....Any ideas what it is?More picturesAnother pic

I just bought a 1g after being out of the game for years.... Previous owner had installed a set of konig 18x7" rims on the car...Well car sat for so long and they dry rotted... I'm looking to replace all 4 tires and don't need anything super expensive and looking for what size tires to...

Hey guys off topic question thus being in the hangout...I have a Samsung Infuse 4g via AT&T and when I was transferring pictures from phone to sd card and then to the computer I noticed for some of the pictures which I have dated, there are a pile of pictures that have like a 13 digits title...

I have a quick question for a buddy of mine. Does anyone know where it is possible to buy prothane mounts for his car? It's a 99 Dodge avenger with a 2.5 V6 I don't know anything about neons/avengers....so I figured I'd ask here...I know you can buy prothanes for the 4g63, but I can't seem...

Just within the last 2 monthes I finally got my eclipse back on the road...First time starting it up I turned everything on to make sure things worked....Everything in the car worked but the heater controls...(I get absolutely no air...)Well I took it to a local electrical shop and dropped...

Was driving the car tonight trying to further break in my motor, when I started going up a slight hill....I stayed in 3rd gear rougly 40 mph then all of a sudden the car bucked once...I thought I had a small hiccup with the gas going through the stock filter so I had the wifey hook up my 2g...

First off I did search and haven't found an answer to my main problem...:notgood:When I used pocketlogger the code P0204 popped up as well as code P1105, logged in here and found that it is P0204..... Injector No.4 output driver not responding properly/malfunction P1105..... Fuel Pressure...

I've been searching for at least an hour and I can't find a solid answer to why my driver side intermediate shaft/carrier bearing won't line up to my a/c bracket/block...There have been multiple post regarding this topic and nobody gave a solid answer....I've tried a 95-96 style...

I'd hate to post up another battery relocation thread but I can't seem to find the infomation I'm looking for.....I'm planning on buying about 25 ft worth of 0/1 power cable for future battery relocation use and would like to be able to install it at this point in time but not tie it in...

I just recently got an ACT 2600 Pressure plate that I needed so I can slowly start to put the car together.Is this pressure plate usable??? I know now it has some rust on the back side, and on the fingers it has light scratch marks on it. Probably from a bad TOB or something.There is no...

This Tech Article is for those that need to replace their foglight bulbs wheter they are blown, or just looking for an upgraded unit.... On a further note, my foglights were off the car when I recieved it, so I do not know the procedure on how to remove them from your car...Tools required...

After searching I cant seem to find an answer to my problem....On my newly aquired 99 GSX the previous owner decided to cut the sockets for all the bulbs to the taillights out.... Well getting a new line from the little white plug on both sides where the wires go to the taillights is not a...

A while back I purchased a Dejon modified stock sidemount for my old 91 TSI AWD since then I got rid of the car sold the SMIC setup in which I've never used and got a nice 2g.....I remember the 1g cores being a decent size and the outlets suck where-as the 2g's core is small and the outlets...

I just recently purchased a backup manual cd with wincaps from FP. The install of the manual on the hard drive was very easy ,but for some reason I can't get wincaps to load or even start the program....A pop-up says this exactly this16 bit Windows Subsystem...

I've been searching for the last hour, reading as much as I can about evo pistons...From the main point it seems like everyone with a 1g is wanting info on them, but nobody for a 2g....So to make my question short and simple will evo 8 or 9 pistons fit on 2g rods not 1g's.Also, how...

Well for starters, a local friend of mine traded his 1g for a 6 bolt swapped 98 gs-t.We've been cleaning up and replacing everything that needs replaced as needed....But now we have come to a standstill as we cant seem to figure out what a few plugs go to...I'll post the links due to...

I've been searching for about an hour and I can't seem to find a detailed instruction on the clutchswitch wiring mod...From what 've gathered so far...Goes clutchswitch with a blue wire and a black wire.... The wires then connect to a plug where the blue wire and green wire meet and...

I recently went to replace my stock oil return line with a Push-lok drain system.From what I noticed both bolt holes that bolt the new aluminum fitting onto the oil pan have been stripped out and helicoiled by the previous owner, now I am at a standstill, b/c the last thing I want to do is...

For starters have searched and searched again but every picture I find is or either a 1gb or 2g dsm...I've been trying to figure out how to mount a kill switch in the keyhole area of a 1ga awd.I'm kinda stumped on exactly how to mount this thing. I only have a fuse wired inline for the...

Alright for starters I have the entire intake system all bolted together and everything.....All Brand New gaskets all around and everything..... Intake mods SBR Stainless J pipe SBR RACE FMIC Tial BOV GM MAF Magnus SMIMPut the boost leak tester on the turbo, pressurized the...

Ok for starters I know now-a-days 264/264 for decent midrage, 272/272 for up top performance...and then 264/272 for the best of both worlds while giving in to each a little...also my tranny can't exactly handle 8k+ shifting....:barf:I'm sure everone has noticed that COMP cams sell in...

Ok for 1 I'm posting for a good friend of mine and when he bout his car its starting to rust a bit so I'm already a lil' skeptical of this car....Previous owner cut the stereo out but I myself am unsure if there are any extra wired after cd player wired back in...in which it does work....Our...

Just as a starter I have search, but didnt find a conclusive answer to the question I have...I'm soon to be running a E316g and I was planing on running a new s/s oil feed line from the oil filter housing...(btw upgraded from 91-94 water-oil cooled...to 90 style:thumb: ) and I've been...

Ok its been a long time since I posted around here...and I've been searching and searching for info on my gauges...I run full cobalt series gauges...boost/vac, egt,a/f (narrowband) ok for the boost its white and black simple....black = ground <<<--connected white = 12 dash lighing<<--not...

I just recently ripped my transmission, transfer case, and both axles out of the car. upon looking at the transmission the the metal clip that was holding the tob on wasnt on right OMG (not my fault got car like that)...Now to start from the beginning I know 1g trannies are not that great and...

ok i know it has been answered before i just cant find it today been a long day at work...but here it goes how are the splines different on different year cars that means tranny, t-case, rear end please make it easy for me to understand b/c im getting frusterated bout this lol please...

Hey guys and gals what's up i was j/w how you peeps have your guages in your car im thinking bout having the egt, vac/boost, and a/f ratio down the a piller, and oil pressure, water temp, and fuel pressure in the center vent with and afc-2 runnen under my deck. i was also wondering how would...

:talon: i own a 95 talon tsi awd as in my pro. im not sure how much i can get for it b/c im going for a 90 awd talon for round $700. to my knowledge the tranny(think intermidiate shaft) and the transfer case is blown, because my car will go into gear be refuses to move even an inch just sits...

:talon: :talon: For some reason my car (not listed) is burning oil really badly and drives rough, every time i drive i need to carry an extra qt. or 2 of oil. it has 130000 miles, it is a 90 talon tsi awd. the top end was rebuilt about 20000 miles agowith a new timing belt and valve internals...

ok guys i have a question. When lining up to race exactly how should i let the car launch. its a 95 talon tsi awd and the last time i just popped the clutch and i basically blew up the transfer case, it couldnt handle the torque, and it twisted the main shaft going in it from the tranny. im used...