The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Morrison Fabrications
Please Support Fuel Injector Clinic

Search results for query: *

  • Users: Goobdog
  • Content: Threads
  • Order by date
  1. 1997 GSX drag car project

    Goobdog submitted a new DSM Profile :1997 GSX drag car projectRead more about this vehicle here...
  2. AEM in a 1g auto

    I just received my AEM and i'm going to install it in my car. It is an auto car and the tcu has been removed since I did the Kiggly manumatic wiring. I just want to see if there is anything I need to do before I install it, I think on a 2g you have to remove a wire and I want to make sure if I...
  3. 650-700 whp which turbo ?

    Im building a 2.3l stroker over the winter to achieve my goal of 650-700whp. I need to know which turbo/s will achieve this number. Im sure there are some BB turbos out there with reasonable spool that can achieve what im trying to do, if anything I can add a little spray to get things going. I...
  4. Ordered my Sportlines, Ingalls rear arm question

    Im pretty sure that I will have to get something to correct the camber in the rear but the front should be ok correct ? Summit Racing has the rear Ingalls adjustable arms for 58 each, is this all I need for the alignment shop to get it back to normal ? Thanks for any help.
  5. Cant pinpoint boost leak

    Ive been trying to track down a boost leak for a while now. I'm hoping someone may have had this problem before and can help me out. When I pump air into the leak tester it will hold for a couple seconds then it will leak out of what sounds like the compressor cover. Its not coming out of the...
  6. TB coolant line removal - comments and questions

    I removed the throttle body coolant lines about a month ago when the weather was still warm. The car idled great, now that it has gotten cold it will not idle under 2000 rpms. I suspect this is from not being able to melt the wax pellet for the fiav ? I looked on the vfaq on how to block it off...
  7. Smoking between shifts

    My car is smoking in between shifts but only when the turbo is spooled up. If you drive slow and let it not build boost it doesn't smoke, also it doesn't smoke at wot only when I let off the gas to shift. The car doesn't smoke at idle either. Would this be the oil seals in the turbo ?
  8. New engine problems

    Hello i'm having some weird problems with my new motor. I have a freshly built shortblock, 1g rods and 2g pistons, b16g @ 12psi and arp head studs @ 90ft lbs. The block was decked for a metal gasket, the head was milled also for a metal gasket and a little porting on the exhaust side. I'm not...
  9. 16 leaky valves = loss of power ?

    I lifted the head on my GSX and blew the headgasket so while I had the head off I decided to get it checked out. I took it to my machinist and he said the valves were never lapped in correctly and they didn't seal up. I took this car to they dyno before and it made a whopping 218 whp with a...
  10. Forza Tuning muffler

    I bought some exhaust from a guy, its 2 1/2 inch to the flex section then 3 inches the rest of the way out. The muffler says forza tuning, I searched here and other search engines and found nothing. Is this thing a pos or has anyone heard about it ? Also if I could get some muffler...
  11. Silly question I guess

    A while back my fuel solenoid got some crap in it and got stuck open and was dumping gas into the motor. The thing is it was only putting it into the #4 cylinder which is the first place for it to go. Now my question is if you have a single nozzle in the tb elbow how is it getting to the...
  12. Been through 3 clutch pedal assemblies in 2 weeks

    I dont know what im supposed to do here. Ive tried new, welded and one that worked with the same 2600 pp for 2 years and it just gave up today. I was getting everything together to go to the track today and of course this bullshit happens. I have to have a car to get to work. Anyone else had...
  13. Gas pouring into #4 cylinder

    I was driving around today trying to put some miles on the new clutch. The car was running great until I got off the ramp and it just died and wouldnt start back up. AAA came and gave me a tow and I started looking it over. It has fuel and fire and the pump is working but its just dumping gas...
  14. Faulty O2 sensor causing sputtering ?

    Is this possible ? My car has been sputtering ever since I ran a little race gas. I know leaded gas is bad for the sensor but I never had a problem on my other car and I ran leaded fuel all the time in it. The car has new plugs, wires and no boost leaks. In MMCD I cant figure out which option...
  15. Where to buy clutch parts seperately

    I was wondering if there was anywhere to buy an ACT 2600 pressure plate by itself ? I see the discs everywhere but not the pressure plate alone. Ive been using a 2600 for 2 years of heavy beating and it is finally starting to slip when I use nitrous but otherwise its ok. I love the pressure...
  16. Direct port on stock intake manifold

    On the back of the stock intake manifold on the runners there are round casting marks in it. If you've seen one or have one off of the car you'll know what im talking about, if not ill try to get a picture of what im talking about. Would it be ok to the the nozzles where these marks are or is...
  17. What are you 2.3l guys shifting at ?

    What do you shift at, also list your turbo and cams. Thanks
  18. Need help quickly

    I got underneath my car to bleed the slave cylinder because my car was hard to shift after a high speed run ( see tached out in 5th ). When I was under there I noticed some marks on the flywheel so I busted out the handly flashlight and saw something weird. The flywheel has been grinding up...
  19. 2G Murdered my clutch fork tonight

    I figured it was going to happen sooner or later. ACT 2600 with the stock fork. It didnt happen until i crossed the finish line and put it in neutral to coast, I pushed the pedal in and it stuck to the floor. I got out and looked under the car and the slave cylinder rod was just dangling there...
  20. Now this is a turbo

    http://www.ridgeracing.com/new_car/newcar_Images/slides/PC311624.html106mm Turbonetics :eek:
  21. Front end bouncing everywhere

    I replaced my struts because when I launched the front end would get stuck up and would take forever to go back down. I went to AutoZone and bought some struts and these things bounce everywhere. I know I shouldnt have bought them but I really didnt have a choice. If im going down the highway...
  22. NX Wet Kit

    Im running 18psi on the stock 14b with a 2g ported mani and 2 1/2 buschur downpipe. Im putting a 55 shot on my car. I launch at 7000 rpm ( dont ask ). When im waiting to launch holding the rpms my afc shows 100% throttle postition even though its not on the floor. Im just wondering with the kit...
  23. Clutch help

    Hello I have an ACT 2600 kit in my car. I had to replace the tranny a while back and ever since then its been weird. I bled the slave cylinder and the pressure is fine its just it seems like the release point is in a different spot everyday. Im thinking maybe there is still air in the line but...
  24. Fuel pressure regualtor vaccumn line

    Hello I had to replace my head gasket and I was in a hurry and didnt mark which vaccumn line went to the fuel pressure regulator. I have everything hooked up except that. I looked at the hotclick pictures for the 1g and it didnt say where it went and I couldnt see it. I would think it would come...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top