If you town has UBER (personal car service), use this code to get $20 dollars credit when you sign up (new users only).CODE = u5zi0Link: https://uber.com/invite/u5zi0

Okay, i just bought my palm m130http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ih=008&item=180007032340&rd=1&sspagename=STRK%3AMEWN%3AIT&rd=1I am getting the pocketlogger software from a friend. Can i buy this cable in the link below and use it for my 2g eclipse...

On Jan. 2 I dynoed my car at Church's Automotive. My goal with this turbo was 300whp/300torque and I got it on 96ish octane (101 mixed with 91) and 23 psi.Numbers were:317whp , 338 torquesome crank figures could be assuming 12% drive train loss...360 hp assuming 15% drive train...

So i put a tube down the gas tank and it reaches a dead end after like 3 feet...the hose comes out completly dry and doesnt even reach the gasi also looked for a drain plug, but couldn't find it.any ideas?

Anyone have any experiences using this? good? bad? difficult? etc. Searched through the parts review section but couldn't find anything.Auto Meter Digital Air/Fuel Ratio Wideband Gauges.thanks

can someone make this picture a liittle nicer,i wanna use it as a background. like maybe blur the background. or make the background b/w and keep my car colorful? i dunno. THANKShttp://i19.tinypic.com/66j07xt.jpg

never got around to post these, but here they are...ipics http://s155.photobucket.com/albums/s301/gstspyder_2007/vidshttp://youtube.com/watch?v=_gHKhy58JXchttp://youtube.com/watch?v=IXRmZV0femQhttp://youtube.com/watch?v=SJTb1aLGMMU...

I already have a mbc installed, so i dont think too much work is required, but i need hlep because im confused how to do this one. so can anyone help asap? mod is in a few days...

i saved some logged files but i cant get them on my computer.My understand is that i need to download tuner stein player, install it, then click palm n stein, chose the com port where the pda is connected. At this point, it says push the transfer button (after the corect com port is chosen)...

Car is: 98 gst spyder with 75k Car mods are:evo 3 16g dejon tool intake cone air filter mbc (soon to be dual setting ebc) ets street/strip fmic 660cc injectors 190lph fuel pump safc2 evo3 o2 ported housing 2g intake manifold ported apexi 3 inch turboback (no cats) act 2100/12 lbs...

It just seems like the pipe should have the hks flange on top and have the end pointing downards. Am i correct? or am I putting in the pipe the wrong way.if i have the flange facing up, and connect the longer end to the throttle body, then the shorter end faces upward, which makes it...

I know there are some fwd people here that switch from low boost to high boost. They use low boost for off the line and in 1st, and maybe around 2nd switch to high boost.I want to do this for my car, but I'm confused about one thing. Isn't there different fuel maps/afc corrections/etc at...

No questions on what brand I'm getting because I'm getting thishttp://www.extremeintercoolers.com/2g_mitsubishi_eclipse.htmlfor many reasons. Now I just dont know which kit my evo 3 16g turbo would need.They got street (25" x 7" x 3" ) street/strip(25" x 7" x 3.5")...

So I got an Evo 3 16g on my Gst Spyder. I got 660cc injectors, 190lph fuel pump, etc.1. What is the highest PSI i can run on 91 octane?2. What is the highest PSI I can on this turbo? And at the PSI, what octane should I use.

Can anyone tell me how much watt the stock speakers and amp have on a 98 gst spyder? very important, please respond asap. thanks.

these are blitz products The Dual Solenoid Boost Controller S(DSBC Spec S) has four programmable boost settings or various levels of boost. This unit features a built-in boost gauge, peak boost display, four different boost settings, boost warning, scramble boost, and a boost limiter safety...

Hey guys, I want an ebc with dual setting. the only one that I know in the $200-300 range (which is the price range im looking for) is the greddy profec B spec II. But I have heard many bad things about it, such has not being responsive, allowing boost creep, etc. What are my other options in...

Okay I was on a hill going uphill at a redlight, and some guy came all the way up my ass. I got nervous to not roll back and over reved and held the clutch in too long (act 2100, stree disk). I heard this loud bang on the bottom right side of my car and shortly later the smell of burnt clutch. I...

Okay guys, I really need a fmic, and done research but can't really conclude to which one to go with. The Greddy 24R seems to fit my tastes the most, but I'm hesitant because of the long route piping they have. What fmic would you suggest for me with the following conditions:-must be around...

anyone have one of these and not using it? i broke mine.

I've been searching around but i have not found a good read on FMICs and I am looking to buy one soon. Is there anywhere i can read about them, or can someone just write out the basics? I have questions like:-How do you compare FMIC? flow rate, cooling rate, size, water capacity (i just made...

Hey guys, I found this thread on here a while back, that had a link to a site that sold the Autometer Phantom Series EGT guage that would go 0-2000F. Mine goes 0-1600F aand every site i look at has that one. Do you guys know where i can find that one that ran from 0-2000F? I'm pretty sure they...

Okay, so I finally finish my turbo install and I find this thing under the car. It's like some hard metal piece, no clue what it is, or if I need it.

I cut mine a little too short to fit my J pipe, so any of you guys that have hard piping that dont need your stock rubber one, would you be able to let me have it? Anywhere close to my house, like anyone from LA, burbank, van nuys, glendale, sun valley, sunland, tujunga, la cresenta, north...

Hey guys, just installed my evo 3 16g, and evo 3 o2 ported housing, but the downpipe doesnt sit flush. theres an opening. How can I get that to fit right?

Okay, so the evo 3 16g is installed, the injectors are installed, and i have a safc 2. I want to try out the car. what settings should i run with and what psi.THE FUEL PUMP HAS NOT ARRIVED YET.

Aright guys, I'm installing my evo 3 16g in a couple of hours, with the extreme psi install kit. OTHER THAN the writeup on vfaq, is there any other install guides? Already looked in the tech guide without much luck. Thanks.

Is this a real evo 3 16g? from reasearch i found this:49178-01420: Big 16G 49178-01520: Small 16G 49178-01470: EVO III 16GMine reads 49178-01(47)0 the 47 is like printed on, while the others are casted on. the 47 is the essiential difference between the other 16gs. Is this real? is...

I just bought a walboro 255lph fuel pump + fpr + install kit. Is this really necessary if i want to push the limits to my evo 3 16g? I have 650cc injectors as well. my friend says its overkill and 190lph will get me very good numbers...as he has gotten them. should i return this stuff and just...

Hey guys, i need a tune because i have an evo 3 16g, fpr, fuel pump going in this week, and i installed the 650 injectors....so i need a good dyno tune. theres a lot of places, but from your SO CAL experiences, what place have you had your car tuned at?? Please provide a phone number at the...

Hey guys, just installed my FIC 650cc injectors. I have NOT installed my fuel pump/fpr yet, but am driving the car. What shoudl i set my SAFC 2 and boost to to be safc until i get my fuel pump/fpr installed and a proper dyno tune. Right now its at -32% and 10 psi.

I was going to order my evo 3 16g from forcedperformance.net for a few reasons:1. cheapest price 2. they port/clip 3. cheap price for install kituntil a friend told me that evo 3 16g can differ..is this true? i mean other than the knock off GT or the chinese ones with the blue...

I just installed my dejon tool intake and the car won't pull as it used too. I thought it was suppose to pull harder. What i did was put a breather on the hose coming from the pcv valve, and capped the hose from the evap cansiter...but my friend has the same setup, and no problems...any ideas...

Okay so i got my dejon tool intake pipe with no tubes... optoins areall tubes w/ bov tube only no tubes.there are two hoses coming into the intake, one from valve cover, adn the other from the back of engine bay(not sure what it is), but they have no where to go now...i dont want to...

Hey guys, my mechanic told me i have bad axels, so do I just get oem ones, or is there any performance type of axles for my fwd, since I do strain them a lot. thanks

Hey guys, i'm looking to buy the FP intake for my 98 gst.http://linux.forcedperformance.net/...Code=DSM-Intakethat one to be exact. for the moment, i have a t25, but plan to get 16g later. would this intake work with my t25 and 16g? I THINK thats what the coupler is for...if i am...

In order to datalog, you would need any PDA, and a cable to hook it up? What does it hook up too? SOme guy is selling a Sony Clie PEG-320 "indiglow" palm...after i get the Palm and cable, do I need anything else to datalog? for example software? if so where do i get it from and is it cheap...

My engine mounts are pretty much broken and I need new ones.Do you guys recommned OEM ones or aftermarket? Something like performance engine mounts that would hold the engine very stiff. Is it worth getting these performance ones?And if so, what brands do you guys recommend?thanks

My alignment shop told me that i have a camber of -2.5(left) -2.1(right) for the front and -3.1(left) and -3.8(right) for the rear. There are some camber kits that adjust to 1 degree, some to 3 degree, some to .75 degree, which would i need to fix my camber problem? what is the recommeneded...

Looking for new tires, but i have a pretty lower budget. I'm not going to hit the tracks anytime soon so any will do..Where should i look or buy them from.215/40/18

I have really bad camber problem and i have worn out the inside walls of tires... i need some ideas where to get camber kit and what brands? i have a 1.7 drop in front and 1.4 in the back....h&r lowering springs... do i need it on front and back? im lookin for something inexpensive but will do...

Hi, guys, I have been noticing (from the dipstick) that my oil is very low everytime i check it. After getting on a jack for my exhaust, the mechanic said that it's a gasket that needs to be replaced. Not 100% he said gasket, forgot...but the oil seems to be coming from around the filter, but...

Lately I've noticed my back driver's side tire makes noise while I'm driving. It has gotten louder and louder as time progesses. I'm not sure if it's the tire, axel, bearing, or what not...any ideas?

Hey guys, i just found out that the autometer egt guage i have is worthless cuz it only goes up to 1600F. Looking for another egt guage to match with my autometer phantom series ones...any ideas on good yet not tooo expensive gauges?my phantoms are white faced with red...

Well I'm going to be pulling out my o2 housing and exhaust manifold, and going down to RRE to swap them out for ported ones. If you have bussiness to do wiht RRE, you can come with me, but I wanted to see if anyone can help me remove those...P.s. Live in sunland 91040.

Okay i'm one step away from my turbo upgrade, all i need to do is get my exhaust manifold and 02 housing ported? OR should i just buy some other ones, like maybe evo 3 exhaust manifold and o2 housing? plannin on gettin the evo 3 16g and pushing it to its limits... so which one should i go for...

I'm having my apex-i catback system installed, do i have them hook up the oxygen sensor or not?Also, would it be a good time to tap into that oxygen sensor for my A/F guage? is that where you tap into it?thanks.

I am buying an apexi N1 exhaust, the retailer selling it to me is asking me if the gst exhaust will fit my gst spyder? I am pretty sure it will, but i wanted to make sure? Is it going to be the same? need answer asap. thanks.

hey you guys, the other day, i just noticed my a/c not working...the fans are working, but the air is not cold. i already checked the fuse and relay...looks fine...what can the problem be? 98 gst spyder btw. thanks.