The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support ExtremePSI

Search results for query: *

  1. Which clutch to choose?

    okay so my clutch just started to slip yesterday at WOT in 3rd and 4th so im gonna be getting a new clutch soon. what clutch should i go with? i was also thinking about replacing the flywheel instead of having it resurfaced. any suggests on which flywheel? also im curious if there is anything...
  2. [RESOLVED] Picture Needed for 2g Timing

    wow this thread saved my sanity! i <3 the search feature :)
  3. pressure plate issue

    so i took my pressure plate to the guys over at act(which luckly is a block down the street from my work) and they said they were not sure what caused it but it could have been a faulty pressure plate so now i have the new kit ready to install :)
  4. pressure plate issue

    oh no its stock length...
  5. pressure plate issue

    tob was correct. fork looks good. and whats this about the slave and extended slave rod?
  6. pressure plate issue

    okay so im having some issues with my pressure plate. the first was a act 2100 that lasted 5 months of daily driving(maybe 6k miles total) before half the fingers snapped off. now i didn't launch the car or grind the gears. i figured it might just been a bad pp so i replace it with a 2800 and...
  7. help with clutch point of engagement

    okay so i searched and i found a bunch of threads on this topic but i just want to be sure of what im doing. So i had the 2g "ghost pedal" so i replaced the master cylinder. then i was fighting with the "pump up" issue for a day or two until the master cylinder finally just died on me(pedal...
  8. clutch freeplay changes?

    hate to thread jack but im having the same problem. so do i adjust it a quater turn? or adjust it so it engages a quater inch higher off the ground? my car doesn't grind but when i start to drive it the point of engagement is really close to the ground but after a while the pressure does...
  9. please help me with these codes

    I was thinking that it was more then likely a bad egr valve but just need a conformation
  10. please help me with these codes

    okay so i have a p0401 egr flow insufficent AND a p0402 egr flow excessive code on my car. anyone know what it is? thanks, in advance for the help :D btw i also HAD a p0411 or p1411, i forget which code it was but it stayed off onced i erased it
  11. LOUD squeek from the drivers side wheel whenever I move my steering wheel

    Okay lets answer some of these questions. First off the car is not lowered and I check all my fluids regularly so the p/s fluid is normal. the belts are all fine and its not that kinda sound anways. It sounds like its coming from the top end of the wheelwell which led me to believe that it may...
  12. LOUD squeek from the drivers side wheel whenever I move my steering wheel

    well just like the topic says, my car just started making a nasty noise when ever i turn the wheel. It started right after I jacked up my car to change the oil. It only makes the noise when the car is on the ground because i jacked it up today and it made no sound when i moved the wheel but as...
  13. hey guys i need some help

    wow im stupid i didn't even think about checking it. ROFL thats what to much work and lack of sleep will do to you. i have a really high quality voltmeter that i use for work and the thought never even crossed my mind to check it. well i guess i know what im off to do
  14. hey guys i need some help

    im having issues with my car(once again). okay for the past few weeks if i had the headlights on and then put my turn signals on, my radio would die. i figured a short somewhere. then it started to kill the the radio when you signaled to turn even if the headlights weren't on. also if turned the...
  15. my evoIII is finally installed YAY!!!!!

    well everything went fine for the first day or two but now im getting an CEL. its error code po125 and po170 which, after some reasearch, has lead me to beluieve that my front o2 sensor is bad. any thing else it could be? thanks for the help :cool:
  16. my evoIII is finally installed YAY!!!!!

    only reason im boosting 14ish psi is because my mbc doesn't want to hold boost. damn dejon dual stage is a piece. anyways thanks for the support and i'll keep boosting :thumb:
  17. my evoIII is finally installed YAY!!!!!

    well im all excited now because, as the title says, i got my evo316g yesterday and got itall installed and stuff today :cool: boost after 2 weeks is a beautiful thing but i have some other quick questions. should i go easy on it for a while and if so for how long? boost is set around 13-14 psi...
  18. Just wanted to let every one know...

    im looking at 3 weeks of downtime, one down two to go. waiting for my evo3 since my t-25 decided to take a crap upon me last week. once mah turbo is here ill be under her and then...JEZEBEL WILL RUN ONCE MORE
  19. help with boost/turbo problem

    i forgot to update it before i said it was the turbo. theres about a half inch of side to side shaftplay and it scrapes the fins. also theres about 1/8th inch of front to back shaftplay, oh and theres smoke out of the exhaust and oil in the intercooler pipes and the intercooler and if im not...
  20. help with my evoIII 16g

    i worked 17 hours yesterday. and 18 tuesday, and 16 monday, and 13 today so before you start to bi*** amout my lack of searching take that into consideration. :p
  21. help with my evoIII 16g

    how am i gonna port it out?
  22. help with my evoIII 16g

    okay so im gonna order me up an evoIII 16g tommorrow from slowboy racing, and i need to know what else i need besides the 2g install kit. it bolts up to the 2g manifold right? so i dont need a new manifold. im gonna get the inlet and outlet ported and the 34mm flapper. whatelse do i need? I need...
  23. help with boost/turbo problem

    around 900ish. why do you ask?
  24. how much shaft play is normal?

    like the topic says how much shaft play is okay? what is notmal and what is a blown turbo? i gotta know cause im gonna be ordering a new turbo tommorrow and i would like to make absolutely SURE its the turbo and nothing else. someone please let me know
  25. help with boost/turbo problem

    but without the 34mm flapper wont it creep like a biotch?
  26. help with boost/turbo problem

    i dont really wanna but i dont feel like calling my tow company to tow it to my work. i pretty much am gonna limp it all 5 miles of it without boosting it. i think i should be OKAY but if i must ill get it towed. any ideas on where i should get my evoIII from? i was looking at it a while ago but...
  27. help with boost/turbo problem

    shaft moves maybe 1/16th to maybe an 1/8th inch so bye bye turbo. anyways is it safe to drive for a few days?
  28. help with boost/turbo problem

    the oil line is covered in oil right now. so im thinking blown turbo. its gonna be a week or two before i can get a new turbo(eIII16g here i come :sneaky: ) so if its the gaskets should i park it or am i okay to limp it from home to work and back(5 miles of desert roads)? its just odd cause it...
  29. help with boost/turbo problem

    okay so i start my car today and pull out onto the street and i can hear the turbo, and it sounds different. it sounds more loud and a different tone and its ot generating boost correctly as in not enough boost so i shut it off and check it. in neutral when you give it gas it smokes somewhere...
  30. MBC-2a

    time to bring this back from the dead LOL! anyways i gave the guys over at dejon a call and they sent me a replacement mbc. now i hooked that up and sometimes it spikes to 17 then drops to 15ish and sometimes it spools to 20 and stays there. so what the hell should i do? it feels so good at...
  31. MBC-2a

    im having troubles with mine also. it either boosts stock levels or like 20+ no inbetween. i haven't really played with it to much cause i've been real busy but im gonna check it today. anyone have any ideas why it won't boost at a descent level?
  32. My sleeping habits suck.

    pfft. none of you guys have got ANYTHING on me. i got to work at 4am and i dont get off till after 7pm. i do that 5 days a week. then i work prolly 12-14 on saturday and another 5-6 on sunday. EVERY FREGGIN WEEK. oh and on wensday im not suppose to get outta class until 10pm. 15*5 = 75 + 17 = 97...
  33. quick overview on replacing rear drum brakes.

    i was gonna buy a hanes manual but i figured why the hell am i gonna pay 20ish bucks for a book on a car that i will never use again. she has a crappy 1994 toyota camary and chances are shes gonna get rid of it pretty quick so it would be 20 bucks down the drain. thanks though. come to think...
  34. need some help with leeking fluid.

    yeah i think i'll be tasting it now.*waits for sarcasim to set in*. i dont launch it very hard and i dont wheelhop to much. Its dripping from the body/transmission of the car as in its leaking from somwhere and then dripping so i cant figure out where its coming from. i wiped it all down today...
  35. need some help with leeking fluid.

    do you ever sleep Defiant? what are you doing posting at 3 in the freggin morning? i mean i apperciate it and all but get some sleep and post in the morning.
  36. need some help with leeking fluid.

    can't be because it leaves stains. im like 95% sure its brake fluid and its coming from the transmission area but i can't quite tell where. im gonna get it on a jack today and clean the excess fluid up and see if maybe i can figure out where it could be coming from. theres not alot of places...
  37. quick overview on replacing rear drum brakes.

    well as the title says. a female friend of mine(lets be honest the girl that im chasing after :D ) needs her rear drum brakes replaced on her car and me being the "nice" ;) guy that i am offered to do it for her. only thing is... i dont know how to change drum brakes..... so if someone could...
  38. need some help with leeking fluid.

    okay the other day i went into my garage and saw a few drips of some clear liquid coming from my car. so after some inspection i couldn't tell where it was coming from besides under the car somewhere from the tranny so i figured i'de replace the slave Cylinder. That went smooth and i bleed the...
  39. Lancaster/Palmdale CA DSMrs

    i'll be working at willow that weekend. i'll be the guy selling food at the 1/2 mile oval. being a catering truck driver rocks face. i get free track time at willow, and make lots of money :rocks: maybe i'll show up early and watch ya run a few times. you know dsm pride :dsm: :talon: :laser:
  40. Lancaster/Palmdale CA DSMrs

    i know its kinda a dead post but im in lancaster and i have a 1999 gst.
  41. Get ready SoCal'rs, the big one is coming!

    ill be there.... atleast i hope so
  42. help with timing belt problem (vibration after replacement)

    thanks again guys. i cant wait to cram it down his throat bastage mofo. i wish i had more time to do these jobs to my car then i would never have to deal with this bullshit.
  43. help with timing belt problem (vibration after replacement)

    you know what really pissed me off about it all. he compared my baby to a lower vw jetta with bald front tires. i almost threw the son of a bi*** outta my car and beat him to death with his own limbs. but in all seriousness can i drive it or should i leave it parked until monday. im not...
  44. help with timing belt problem (vibration after replacement)

    okay i had my bshaft belt, timing belt, tensioner pulley, and water pump replaced today and i get the car back and its vibrating. the vibration gets worse as the rpm's climb so i take it back. i tell the mechanic that it may be a tooth off or something cause its not running right. he says he did...
  45. grinding noise

    well i got some time after work today and i got my baby up on jackstands, turned the wheels and no sound. so i started her up and turned the wheel and ... nothing. so i drop her down and still no sound so it appears as if the mighty dsm gods like me. it was odd though cause it did it as i moved...
  46. grinding noise

    okay today i am turning into a parking lot and i hear this horrid grinding noise coming from the front end of my car. it sounds like two pieces of metal grinding together and it only does it when i turn the wheel. so i checked the power steering fluid and it was bone dry so i added some but its...
  47. clutch question

    i was just going to ask about that clicking noise :laugh:
  48. 1/4 Mile Track Debut!!!

    i have a tip dont lose :p but seriously what track are you gonna race at?
  49. Is my clutch going?

    okay shift from second to third at 3k rpm then go WOT in 3rd till 5k rpm so the turbo spools. if the rpms jump or it feels jumpy(kinda like wheelhop. i dunno how to put it) then your clutch is slipping. if it is slipping replace it ASAP
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top