hey, that body kit looks familiar! maybe it was a laser thing :) (see my profile pics). that is the first car i have seen with the same kit my old 1st gen had on it!

i have an inability to read and follow rules. Even really, really simple ones.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=39755&item=5735275199&rd=1 ;)

if your alarm has a latching output for an auxiliary channel instead of a pulsed output, all you need is a relay. you'll probably have to configure it to latched in programming mode because usually by default they are set to pulsed.if it does not support being able to change it to being a...

as far as i know. alpine is the only company that makes ipod compatible decks. you can control all of your playlists and everything from the head unit itself. if this is what you are looking for, any alpine with AI-net will work. any alpine from the 9825 series and up will work. very sweet...

email me at [email protected] and i'll send you a couple pictures :)

if your car is FWD i have a fiberglass box for a 12 i can hook you up with, i'm just east of you ;)

lol. well, i didn't once i parted out my 1g and started playing with the impala :p but i always knew i'd end up getting another dsm. i like my talon way better than my old laser. now to find myself a 20g :D

you are absolutely correct. using the auxiliary channel to trigger a remote start module is not hard at all. and it is just a matter of hooking up power, ignition, accesory, hood pin, foot brake, and a tach wire. probably take about 20 minutes. there is no neutral safety wire, however one...

never owned AB, always refused to. had a guy try to give me a pair of their flame 12's once, i opted to keep my digital designs... i wonder why :p installed plenty of AB stuff, and have yet to come across one thing they make that impresses me even the slightest bit. an AB in the correct box...

metra, best kits/scosche both make pockets that work perfectly. any car audio shop should carry the pocket. it mounts into your stock radio brackets.

check with napa. they seemed to always be the only ones that had parts for my dsm. the store off shawnee mission pkwy (i believe on nieman) always treated me well :)

ouch. here 93 octane is only 2.01 a gallon. :p

use a DMM to find the footbrake wire that rests at ground, and when you push the brake pedal, reads 12v. then get a toggle switch, run one side to ground, and the other to the parking brake lead on the d300. then to have the screen on while driving, just flip the switch, tap the footbrake, and...

hehe looks like mine sorta :p mine's a little darker, a little lower, eclipse front bumper, and the rear taillights where it says 'talon' is red instead of orange :) i just gotta get a new exhaust; this apexi is just too much for me. i want something that 'looks' stock. i just gotta find...

i use it at work all the time. people drop alarm remotes in the pool or the ocean, and they are all corroded. spray it off and the corrosion disappears and they work again. same thing with radios that i've had to put in boats. never had a problem.if the corrosion is from caps leaking...

holy shit, i can't believe this thread is still going :eek: 000 i posted a year and a half ago or so... and on my 4th car since i last saw it. wow. well back to dsm again, this time with a 2g talon with a few toys ;) if any of ya are in florida, i live on a little island just south of...

this is incorrect about the bostons. they are designed for SQ, they just happen to get plenty loud ;) and a 10" sub msrp is 149, a 12" sub msrp is 179. they absolutely stomp subs WELL above their price point from kicker, jl audio, and many other companies. for the money, you won't find a...

hell, i still have a solobaric i bought in 1999 (s12d) round baby! still slams like the day i bought it. just waiting to get the boston G5 subs in though :pi've said it before, but the boston acoustics G2 subs are EXTREMELY hard to beat for the money. a 10 is 150 bucks MSRP and a 12 is...

which glitch? :pmumui is my name on there.termpro is the best sub box program, but expensive :( for free winisd gets the job done pretty well

jiffy bath. or any other similar cleaner :)just spray it on, jiffy bath leaves a residue that's supposed to protect. other kinds just dry off within about 2 or 3 seconds. check radio shack or any computer supply store. or a car audio shop should have something.

i have a noise that only happens occasionally, not all the time. about 30-40% of the time. it sounds like a very loud ticking/clicking sort of noise coming from the engine. it does it maybe 4 or 5 ticks, lasting about 2 seconds at the very most, and stops. it's not lifter tick. my 1g had...

april 01 here :P

i'd go with something besides sony for amps, but if you're looking for loud with not a lot of clarity, the square solo's will do it :) check out soundstream, hifonics, mtx for a reasonably priced amp.

go to a paint supply store and get SEM vinyl die. you can use it for vinyl, carpet, upholstry, plastic, whatever. sticks VERY well to plastic, we use it all the time to paint trim rings and stuff for video systems we do. you can get it to match pretty much any color interior you want, there...

blah. foglights just block the air getting to your intercooler. mine are gone :) looks more sleeper that way as well

yeah, i have very little wood in my box :) and sprayed the hell out of it with deadener, not to mention it's pretty thick. i may have gone a bit overboard, but i could have a fat guy jump on it and it'd just hurt the fat guy when he fell on his ass when it rolled. i screwed it through the...

that doesn't look too bad :) the only wood in mt box is the ring to mount the sub to. it's molded into the corner like the jl stealthbox, but the opposite corner where the 2g pocket is in the hatch. i gotta still have room for a stroller :) it's pretty thick, but i'm sure it isn't going...

you will need a LOT more fiberglass resin. also go to walmart and get some fleece. it's a great base and stretches well. i used about a gallon and a half on my box just for 1 12", about 1 cu ft. home depot has gallons for like 25 bucks or so. also get a fiberglass roller. it will help save...

our back windows aren't all that hard. try tinting a beetle, a 4 door saturn (the older type) or an older prelude (like 89ish). a 1 piece back window is the only way TO do it, and with a heat gun isn't that hard. the hardest part of tinting is cleaning the S@#% out of the window, or you will...

or solder ;)

will it work? sure.will it sound good? nope.don't waste your money on that junk. all you'll be buying is shiny chrome paperweights. for 30 bucks more that boston G2 10" sub will walk alllllllllllllllllllll over that audiobahn and play 1000x cleaner.as for the amp, audiobahn amps...

i jsut noticed you're from OP. i believe sante fe auto sound may still carry boston acoustics, they used to but i'm not sure now. i know for a fact that kief's in lawrence carries boston. brandsmart may as well, but i never got a good vibe in that place. i'd check out kief's, on the cornere...

a boston acousticd G2 10" sub $149 boston acoustics GT20 amp -$299it's 50 bucks over your budget, but will demolish anything audioblah has to offer. excellent quality amp will last SEVERAL years to come. Extremely clean and very well built. the G2 subs are just simply amazing for a...

viper and clifford are made by the same people, however are far from the same thing. if you had ever installed a clifford you would know this. the programming on the cliffords are an absolute whore, but they're awesome alarms. and the blackjax feature is really cool, as well as the visible...

i have a metallic dark green tsi with an eclipse front bumper. personally, i prefer the talon sides and rear, they seem to flow a little better imo. but the eclipse front i do like better than the talon :) i have some hi res pics if you're interested, but nowhere to host them anymore

the wires you need are to the right side of the steering column. the lock wire is brown with a blue stripe. the unlock is a brown with a white stripe.they are both negative trigger, in other words when the keyless brain sends a ground pulse to that wire, it will trip the relay and lock...

you have a pm

i have a kenwood setup i am not using that i will let ya have for cheap. 2 sets of rca pre-outs, and lots of options in it. there is a d300 cd player, and a 509 (?) tape player. it fills both halves of the radio opening perfectly. you control the d300 cd player through the tape player. had...

just get a regular gauge pod, and then go to an auto paint supply store. most sell a product called vinyl die, the brand is SEM. they will make a variety of colors, and one should match perfect. this is what i use when i do a video system in a truck/van/whatever. the trim rings are...

i don't have anywhere anymore to host pics, but this is a different kit for 1st gens. i have no idea who made it or what it was called, it was my 90 laser,and it looked like someone had put that kit on at the dealership perhaps. it'd definitely been on there for a while. i have pics of the...

If you wish, you can check my rough approximations for errors.Lets consider the "rule" of "1 farad for every 1,000 watts." You know what a farad is? (farad=one amp second.) Let's assume with the car running you are at 14 volts. Lets assume the battery sits at 12.6 volts, which it should...

i was sorta thinking the same thing. i made a similar box for my car, whenever i get a digi up to the shop i'll take a couple pictures.sand, bondo, sand more. then rug it ;) it will look better. a power sander, dremel, or die grinder is your friend. use it to knock off the big stuff...

i would put my old digital designs back in my car before i touched anything audiobahn makes. i wouldn't use it, nor would i recommend it to anyone else. there is a reason the baskets are all chrome and shiny and decorated with flames... hey, they have to give people SOME reason to buy them...

this is just untrue. i can get you the mathmatics behind it if you would like, but caps are just a band aid for a weak electrical system... if you are pulling enough current to dim your headlights you need to fix the problem correctly at the source... the alternator ;) not a hack fix.i...

wd40 works wonders ;)

in the manual that came with your changer it should have a list of the errors and what they mean. i'm thinking you got the accessory and 12+ wire's crossed, but without knowing what that error is it's hard to say. might check the ground connection as well :)

wow i can't believe this topic is still going! that' is awesome :)well, i am moving to san diego in a few weeks, so i'm selling all my ENTIRE system. i need it all sold by june 10. if anyone needs anything email me, i probably won't have an easy time finding this post again ;) here's...

welcome to the world of DSM's. now you know why i sold my laser :) it was fast as a MOFO when it ran right... the original engine blew at 130k so i got a JDM. it ran AWESOME so i started piling on mods... every one made it that much faster. then the ECU died, another 500 bucks. fixed that...

wanna race? i'll beat both of you in a completely stock, 3500 lb car :Pshame i missed the meet, but i had fun regardless. god i love women :)