I posted this on GVR.org but didn't get too many replies maybe better luck here. Here is my situation. My Galant VR4 got hit in the driverside rear a couple months ago. The wheel got pushed into the body so I replaced the crossmember with one from an Eclipse. Basically the part where the...

I bought this from a dsmtuners member couple years ago but wound up not using it, just been sitting in my closet. Just want to get back what I paid for it.$475 shipped

So I'm swapping a 4 bolt LSD rear end into my Galant VR4 and I notice on one of the axles boots are dry and looks like starting rot. I wanted to replace the both boots on one but I seem to only be able to find the inner boot I can't find the outer boot. The inner is supposedly the same of the...

Hey guys I went to MOD 2016 like two weekends ago. First time I've been to MOD it was pretty cool. There definitely where tons of EVOs there. Anyway I took the GST down there, to kinda take it home and took HWY1 on the way back for the scenic route here some pictures and the link to my album...

1G 3000GT VR4 Calipers. Comes with everything in the pictures, for DSM you'd need rotors, pads, adapter brackets, and a safety wire or clip to hold the caliper pins in. In pretty good shape red paint is starting to come off.Asking 175 OBO

I was watching some youtube vid and this commercial popped up and thought you guys would get a kick out of it. It's a lady driving her Eagle Talon TSi to Carmax on they way she does some showboating. I wonder how they got it to smoke the rear tires. You could definitely get it to drift like...

HadesOmega submitted a new DSM Profile :Black Widow Galant VR4 #1373Read more about this vehicle here...

Just copied from my CL ad. Since I got the Galant and I wound up just getting the clutch replaced on my GST I decided not to use this. I really only bought it for the LSD but I'm sure if you fix it would be a good tranny.I bought this Shep rebuilt FWD manual transmission last year off of...

My clutch has gone out on my GST and I'd like to have a Wavetrac LSD installed in my transmission while its out. Are there anyshops that can do this or have done this with DSMs (more specifically the LSD)? I would do it myself if I had the space but I don't =/ I did a search also and came up...

So I did a search and it seems like the throwout bearing, pivot arm, or ball might be the culprit. But I just want to confirm before I tow the car to a shop.Here's what happened. I was driving and shifted to third, and I felt a kinda clunking in the clutch pedal or a noise something like...

So I finally managed to get this Sparco Torino seat I purchased a while ago and had it fixed because it was torn. It is the seat, with a sparco slider, and Corbeau seat bracket for 95-99 Eclipse. Man it was a pain in the ass to install I might want to raise it a bit but anyway the major...

Hello everyone wow the forum sure has changed lot, been a while since I've been on tuners. I posted this in the Hangout section but I thought this would be relevant in this section also. Check out the link if ur interested...

Whew well I've made another accomplishment with this car. I haven't been on DSMtuners for a while because I hardly drive my car since I started riding a lot recently. But its time again for the bi-annual dreaded California smog check. Last time I smogged with PTE 1000cc injectors tuned with...

So I've just barely starting to get the hang of tuning with ecuflash with gasoline. I recently converted to E85 and was wondering if I have to change my target afrs. Ive been doing a lot of reading about tuning e85 on the forum and would like to confirm my findings.First here is my basic...

Just like the title states looking for a GREY driverside OEM floor mat. Would like the little clip that anchors it also but not neccesary. Its the older style clip also that just plugs into a port in the carpet and has a stud sticking out not the one with teeth.

Here's whats left of my stuff for sale:Apexi SAFC- Ran this SAFC in my RS and installed it on the GST after. Using ecuflash so don't need this anymore. Worked great when I was running EVO9 injectors. Now its just a reason to break into my car. Running fine last time I installed it, setup...

Just throwing this out there for now. I replaced my s16G with BEP turbine housing for a plain ol evo316G turbo. I love the BEP housing it is massive but its too much for me, its too big and keeps on seizing bolts. This one won't crack so easily though. Since its ported and huge already it'll...

So I have my small 16g turbo out of the car (not by choice) and I really want an EVO3 turbo so I can get some more power. There doesn't seem to be any around for a decent price so I was wondering if I can convert my small 16g into a EVO3 16g?I'm guessing all I need is to change the...

Well I went to go change my manifold broke those damn bolts so was thinking I should replace the turbo with a EVO3 turbo. Been wanting to try one out because the s16g has been getting a little boring lately.Anyway if anyone has one lying around in good shape I need it ASAP (like within week...

Just as the subject says. There's a bolt that seized and broke when the head for my 4agze engine was taken off. I went to shop near me and they want to charge me 100.Just wondering if this is that the going rate for fixing a broken bolt is?

These are the rear seat back parts from my 98 GST. They are in pretty good condition except the leather is cracking a bit on one. Plus the previous owner had an amp screwed on the back of one of them so you'll see some small holes where the screws were on the back.Asking 75 OBO

So I've been getting this exhaust smell in my car lately and I just ran some seafoam to check for leaks and I got this sorta small crack on the top of my exhaust manifold. Probably one on the bottom too butanyways was wondering if anyone knew a reputable welding shop in the bay area that...

1G Talon Blade Swirls. These are my favorite stock 1G wheels just as good as the 2GA ninja star wheels. Was planning to use these for autox but changed my mind. They have tires but they are shot, they're really old and cracking. The paint is peeling/bubbling and I was in the process of stripping...

My Z is up and running after an engine swap. I want to dissassemble the old engine and part it out to make some change back but I don't have a cherry picker to get it out of my van.Anyone in the SJ area got a folding cherry picker I can borrow?

So me and tonyspyder were trying to get ecuflash to work with his car, its a 98 GST Spyder. The best I can do for him without possibly bricking it is to download the rom then use the continue without definition option and saving the rom file. Without the definitions we can't read the rom or...

The purpose of this install guide is to install AEM's UEGO Wideband kit into a turbo 2G eclipse in place of the stock O2 sensor without using some kind of narrowband emulation like DSMlink. There are a number of ways to install the gauge on DSMtuners but there wasn't one that focused on...

Starting a new thread, other one is too long now. My house burnt down so I'd like to get rid of these FIRE SALE!, please make reasonable offers:98 GST Rear seatbacks- Came off my 98 GST. In great shape except they are cracking a bit on top and could use some cleaning. There are some holes...

Copied from my craigslist, great parts hauler:Just copied from my craigslist ad:Well its time to sell my old buddy. I bought this Toyota van at about 260k and used it as a delivery van and it performed well until the headgasket started to give and all these cooling issues. Its a great...

I was previously running SAFC and EVO9 injectors setup and it worked great but I want to go to bigger injectors. So I bought some PTE 1000 injectors (I verified that they really are PTE 1000s also by looking up the numbers) and put them in and am running ecuflash in my 98 GST.From what I have...

Ok so I've got the Open Port 2.0 cable and ECUflash and I'd like to tune my fuel trims with some new injectors I want to install. Before I was tuning with the SAFC and I got it dialed in pretty well with the pocketlogger. So now I want to use evoscan but its different than the pocketlogger for...

Just as the topic says. I'm in need of a cam gear for a 4G63 turbo. If you've got one lying around and donating it to me =). Here's the post on why I need one as well:Wobbly Cam Gear Video - Are all 4G63 cam gears the same? - DSM ForumsPick n Pull to the rescue again snagged some 5...

So I hear this ticking sound coming from the timing belt area of my engine :confused: I figure I'll check the timing belt at least the top anyway. So I pop the cover off and I notice my exhaust cam gear is wobbly. Here is a video of what I'm talking about:My 4G63 Wobbly Exhaust Cam Gear -...

This is all the stuff I've been trying to sell or new stuff I'm trying to sell mashed into one thread. Won't be bumpin the old ones anymore. Yes I have been in the DSM game too long. Anyway here is what I got:Greddy EVO Catback Exhaust, I got some discovered treasure here. Pulled this off...

Bleh I've amassed quite a collection of wheels I'm selling. I really wanted 17s because its the best balance between comfort and performance on the eclipse and so I finally found a good set of 17s I like (Mustang GT pony wheels) and these are taking up space at my folks place.First up CHROME...

I was diggin around my backyard and I found these dual piston calipers I got a while back. I was supposedly thinking of buying a 1G and plopping these on there if they didn't have em already but I don't think thats gonna happen.Anyway it comes with everything you need to convert your single...

The title pretty much sez it all. 1G BOV exactly the one in the picture. Uncrushed. Asking 30 FTF and 40 shipped. In San Jose.

The shocks were on the car when I bought them, so I don't know how many miles are on them but they're still good, no leaks at all. They are KYB AGX adjustable shocks. The front has 4 ranges of adjustment and rear has 8. These are great for adjusting your suspension to suit your driving style...

My starter is starting to stick so lookin for a newer starter, preferably with around 100k on it. Lookin to pay around 30 for one.ORDoes any know any shops that can rebuild starters in the San Jose area?

Thats right if you have a rear crossmember also known as a subframe I am looking to purchase one. Its gotta be for a 2G FWD, for some reason my driver's side rear toe is out of alignment and I replaced the control arm already, so the crossmember must be damaged I'm thinking.Someones got to...

Sorry too lazy, I just copy and pasted from my craigslist ad. Anyway if your lookin to whoop up on a stock turbo 1g or 2g or those little hondas with your 2GNT here's something interesting:I have a custom modified Star Turbo Kit here that I had installed on my 1995 Mitsubishi Eclipse. This...

I usually just drive my car around town or go from one city to another but I recently drove my car out to to someplace that was about 100 miles away. I have an autometer narrowband AF ratio gauge and I've noticed that when cruising at 70 around 3k RPM in open loop it will swing to the lower...

Its time to sell my baby. This is a 1995 Eclipse RS which was my first car. This car taught me everything about cars. Much of my blood, sweat, and time was put into this car so it has lots of sentimental value to me. Unfortunately its time for me to move on. I have too many cars and motorcycles...

I have 2 front Tokiko Illumina shocks for sale. Asking 150Have a whole set of KYB AGX shocks for a 2G AWD, rear is a 4 way adjustable instead of the FWDs 8 way adjustable. comes with stocks springs on all but one, have a loose spring set for that one also. Asking 230 (That's almost half...

Got some stuff lying around that I wanna get rid of first up is (yeah just copied from my craigslist):These are wheel that came off of my 2g Eclipse GST. They came on the car when I bought it and after much contemplation I want to sell them now, I got too many wheels and these don't ride...

I had smog check due so I did a little tune up before I took it to get tested and I changed the plugs and they looked like this:I know plugs are suppose to INCREASE their gap when they get older but these one did the opposite. Cylinders 2 and 3 had this problem. There was almost no gap...

I was actually scrolling around the DSMtuners page and I noticed one of those little ads that says "Mitsubishi Paint Recall" and it took me to this page: Car Painting | Earl Scheib - Auto Paint Body Since 1937Yeah I know its earl schieb bleh but I definately know the black mitsubishi cars...

I've been scrounging up sideskirts for a while to install on my car but could never really find a full set until recently I scored some 2GB skirts. So now I don't really have any use for these. They're from a 2GA turbo with the black and grey paint. It is just the long pieces, no end caps or...

Sorry I tried searching and I can't seem to find another post with my problem. I have a pocketlogger and have been using it for a while. It's having connectivity issues. Its hit or miss with this thing. It works great and connects sometime and other times it will give me a waiting for...

I got a set of Denso 660cc injectors that I purchased off of someone here and decided I wanted to go bigger. I never used them but the guy that had them before looks like he got a lot of miles off of these. The paint is started to chip off on the body.150 I'll ship em also- SOLD SOLD SOLD...

This sort of goes together with my other article on how to install cruise control with an aftermarket wheel at this link: http://www.dsmtuners.com/forums/articles-exterior-interior/373146-how-2-remove-stock-wheel-retain-cruise-control-aftermarket-steering-wheel-ii.htmlTo remove the wheel...