Hey guys, so my ac belt (one farthest back and closest to driver) fell off while i was driving today. I searched and it seems like ill be ok without it, but i just want to double check, and also if theres anything i should or shouldnt do now that its off.

hey everyone, i go to school in the boston are, and brought my eclipse up this year. Im jsut wondering if anyone can mention some good trustworthy shops to go to in case it is ever necessary. Thanks

hey, for a while now my wipers have had an issue. Whenever i put it on the "timed" setting it just works as if it were on the slow setting. The slow and the fast settings both work fine, but whenever i put it in the timed setting and try to adjust the time in b/w wiping it just stays the same as...

i went to take my car out this morning, and from the moment i first stepped on the clutch i felt something was very different. The resistance that i would normally feel soon after i pressed the clutch, i would feel towards the floor. It was starting to get more difficult to drive and at one...

ok i know alot of you guys cringe at the thought of neons, but i personally just like the way they look, so decided to put em on my car as well. problem is i am having a really hard time finding a place to put them in the front of the car (2g with front mount). So I am asking if any of you know...

hey guys, a lot of times lately, that i park and lock my car, i notice that after a few minutes my alarm sometimes randomly goes off, like today after getting out of my car it goes off after 15 sec as im walking from the parking lot to a store. Now this is the stock security system. Any...

Hey guys, im wondering if i can get any help to see if this ticket can be fought, especially any help from people that live in jersey would be appreciated. anyways last night i was driving down on rt. 18 in the east brunswick area and was slowing down for a traffic light whihc when it turned...

In the past i had purchased and put in denso 550cc fuel injectors and did not change any of the rings on the injectors. I decided that i might as well do this now and was wondering if there is a specific type of ring that i should look for, because while searching extremepsi.com i had a...

i searched and although i didnt get a direct answer to this i think i figured it out but i just want to reconfirm. Is changing a pcv valve on the valve cover as simple as screw off old and screw in new? No fancy tricks nothing to look out for just straight forward screw off screw on? I read...

Hey recently i've noticed something weird about my clutch pedal everytime i press it to switch gears or just when i press it in general. I had just put in an act 2100lb clutch about a month ago and everyhting is going great, no problems at all and it grabs without a problem. But for the past two...

Hey guys, im just informing all of you guys that live in like the central jersey area that every thursday night at 10 that there is a huge meet of close to 100 cars or so at the marlboro plaza in the pathmark parking lot on rt 9 whihc is located right across from lowes hardware. The only thing...

i went to strauss to get a water pump and timing belt done since i work there and everything and get a discount on the work. Anyways as soon as i started the engine the idle sounds really rough and i know before i brought it there everything was running perfect and smooth and had just gotten it...

Out of curiosity i was wondering what the stock clutch can handle as far as power at the crank. Searched but kept on getting threads bout new clutches. Thanks

Hey everyone, well i went and got dynotuned today at Turbotrix. They were prettyy nice and kewl there despite what most people say and they were very helpful and informative. Anyways i went in there with about 225 whp on the base run and after tuning and raising the boost on the b16g to 17psi...

for some reason it seems that i cant raise my boost passed 12-14 psi on my big16g. The only way i think this would happen is if the line going from the wastegate to the mbc has a leak in it and is losing pressure. Do you think this is possible or are there any other reasons why this might...

Just ou tof curiousity, when do most of you that own either a big 16g or evo16g hit full boost around. It seems for me i hit like 13-14psi around 29-3000rpms and wondered how that compares to others, it seems to actually start to spool around 2500ish. Unported mani and o2 though if that affects...

Hey quick question, do your Joe p. MBC boost controllers have a hole in the body anywhere? Probably like 1mm diam. and located where the body bends. Reason im asking is cause i hear air being sucked in from this hole and i think its the reason why i hear a low pitched whistle while i spool. Thanks

when i did my turbo install i ended up having a leak where my oil return line meets the oil pan. Its like a tiny drop every so often but it still bothers me. Ive searched for different answers but i havent really found of one where people say it works for sure. Now the leak doesnt come from the...

i just finished my b16g turbo install, or atleast i hope i did. I cranked the engine over like i was supposed to for a little and then started the engine up. Now alot of smoke came out of the mani and o2 housing but im guessing thats cuz of the pb blaster and stuff i sprayed. Now i had alot of...

Hey everyone, so i finally got around to upgrading the t25 to a b16g. So far everything is going smoothly, all the manifold and o2 and other bolts came out surprisingly easier than expected. Everything was going great until i came across the t25's oil feed line that goes to the oil filter...

does anyone know what the diameter of a greddy licp is? it came from the greddy 18r fmic kit but i just want to make sure the coupler on it is the same size as the L pipe i have to put on to adapt to the 16g. Thanks

ok so im going for inspection soon and am working on getting some things bck to stock form. So anyways while working on those things i noticed that my bov's (greddy type s) screw was really loose and after taking it out i realized that the person who had it on before me killed the threads and it...

This has been bothering me for a while now, even though its not really a big deal i still want to know why this is happening and if i can fix it. Anyways heres the situation. About a month or so back i put on my fullthrottle fpr install went pretty smooth no problems or anything really. Went to...

hey when i plan on putting in my 16g i want to make sure i do everything to prevent stripping bolts and holes and creating big problems since the car is my daily driver. Question pretty much is what can i do to prevent this from happening while i am replacing the turbo, also will using air...

While driving today i got a cel nothing was really affected while driving, but normally when this happens i just pull over and reset the ecu by pulling the battery wire for a few seconds. After finding out that autozone scans them for free i decided to leave it on and go get it scanned. It...

Hey in about a little under a month i am going to have to get the car inspected... and with my mods and a bigger exhaust (have stock cat still to replace test pipe) i dont think i will be passing at a state inspection place since their really strict with everything . Any of you guys from jersey...

Just need a quick yes or no on this, i already searched but got threads that had nothing to do with this, pls its a quick question. Is there a difference between 1g and 2g injectors or will any type of aftermarket injector work in each?

ok so i went to install the fpr a couple of days ago and well those lttle round black spacers popped out :thumbdown :thumbdown :cry: ... well i didnt think too much of it and didnt knopw where they came from so i just left them off... i only have two of them im going to go look for the third...

so i pretty much have all the fuel mods done except for bigger injectors, this includes 255 lph pump, afpr set at 43psi and an safc. im gonna be getting injectors soon and when i do i am planning on going to turbotrix to get it dyno tuned there when i have the new injectors and 16g on there, but...

ok so i finally got my fullthrottlespeed afpr on yesterday and set the base fuel pressure at 39psi with vac line off. Now i just did that based on what i saw in a previous thread but am not sure if thats entirely correct. Ive searched for this and have seen many different base fp that people...

well i have a 16g with the 2g install kit waiting to be put on my car when i get some free time to do this, but as i was looking under my hood today something confused me about how this install was going to get done. Now the instlal kit came with the j pipe and the second pipe that is like the L...

I am planning on swapping my stock t25 for a big16g but wanted to also finish the rest of the supporting fuel mods so i can get the most out of my turbo. I got the Safc and the 255lph fuel pump and am waiting for the fullthrottle speed afpr to come. So pretty much im left at choosing which size...

Well this week at Etown it was their Street Wars event (imports vs. domestics) so i decided to go out and run my car b4 the season ended. Also I wanted to get a couple of runs in b4 i put in the b16g i had purchased. Anyways mods are in profile and here are the times. I know theyre not the best...

i am interested in upgrading my t25 turbo to something bigger. most likely either a 14b or 16g depending on what i can afford at the time. However i have found turbos without the turbo exhaust housings on them for a cheaper price. if i were to get the turbo w/o the exh. housing and buy a ported...

hey just purchased an safc with the blue screen for my 2g. ive been searching and everything trying to figure out which wire goes where... so far ive come up with this...green is rpm signal orange and pink are the air flow sensors ( not sure which is input or output) red power brown and...

hey guys, i did the dumptube mod and i didn't expect to lose pretty much all of my sound that it usually makes in b/w shifts :( . i read a little bit on it and found out this is pretty much what does happen when you cut the tube. i do have a greddy type s bov and a k&n filter... but now want to...

i was planning on porting the exhaust manifold and o2 housing but was just wondering what kinda gains i might be able to expect from this job. also what would i need and what are the steps in doing this job if i plan on doing it myself b/c a couple of shops i went to are really backed up and...

hey everyone, i've had a dent on my right fender for a little while now and have been trying to get the fender off to fix it. There are two bolts under the hood though that just dont seem to wanna come off. They just turn and turn and turn and never get any looser :( . Is there a special way to...

hey i recently was looking at prices for a new turbo and came across these two turbos. I at first was very interested in the fp big t28 being that its a direct bolt on for a 2g but beign that im a fwd i know i might have traction problems (not sure, i have 235/55/16 tires). Well i came across...

hey ive been working on my eclipse and putting on sum of the basic stuff on it and was wondering how much wheel power and quarter mile times (figure it's stock weight and a fwd) you guys think i would be able to pull off with these parts. Here's a list of everything...stock t25 turbo k&n...

hey everyone, i was wondering if anyone knew whatt the pipe sizing was on the tanabe g power medallion exhaust. that was the exhaust on the car when i bought it and am trying to find more info on it. Thanks

i was just wondering if anyone experiencing the same problem as me. I have a 97 gst and occasionally when the car is in wide open throttle the engine seems to lose all power in the higher rpms usually around 4500 rpms or higher, it seems like its taking forever for the needle to move higher. The...

Hey i was jsut interested in knowing what are the injector sizes on the 97 gst engine...also what injectors do you guys recommend for a evo III turbo?