Wanted to offer up some Wedge Engineering Seat brackets for a 2g for any local road racer/autoxer in the Northenr Virginia area. Yes you do have to pickup, not shipping these. They bolt right up and are use for side mount style aftermarket seats.Again these are FREE :D Both driver's side...

As said im looking for a stock intake assembly for a 2g, I do not need the MAF. I am also looking for a stock 2g black hood and 2g front bumper.I have some dsm parts I can trade such as a Xact lightweight 7-bolt flywheel and an extra 2g MAF.

Registration is now open for both portions of the autocross at VMP on Sunday May 9 2010 with NASA Mid-Atlantic.Championship Autocross #2: https://www.nasaproracing.com/event/1036SPK Kart-O-Cross Challenge: https://www.nasaproracing.com/event/1047The day is now effectively considered...

Already so I know a ton of us have wanted to create these, but I have not seen pictures up of their setups. So I just got mine in from the machine shop (of course after I parted out my car) so id figure id post these up to show you guys what the finished product looks like.

Alright, so this is frustrating the hell out of me. I am getting a loud knocking noise and at the same time I feel it through the floorboards, it is that violent. I tightened everything, and nothing is loose, however there is grease around the cv axle leading me to beleive thats going bad. I...

Our last carshow in the spring of '08 was the best ever...lets make this one better!The show will be held on Saturday, April 4th, 2009 from 11am - 4pm, in the C4 lot of the JMU campus. The entrance to the lot is off of Cantrell Avenue. Harrisonburg, VAThere will be the following...

Well since I always surf these forums to look for advice on everything, one thing I found very little information on was wide wheels. There were plenty of opinions but not many pics aside from I think asngsx? So this is just another confirmation thread on 17x9 +35 offset for a 2g. Also the...

Wanted to know if any of you road racers ran crankscrapers to help keep the oil from frothing and the added benefit of improving horsepower by the "flinging" of the oil. I do not know much about them that is why I am asking. I am considering getting one for my 2g 7-bolt when I pull off the...

Alright so im in middle of doing a bunch of things and of couse I happen to have friends over and not paying attention when taking everything apart. So I lined up the timing marks down below and made sure the cam marks where together and took off the belt. Well now im installing it again and I...

Can someone help me figure out what type of 20g this is? I beleive its a td05 housing but could someone help me out? I want to use this turbo, just get it rebuilt.

Coming up on the end of the season on the mid-atlantic coast, this was NASA-MAs last event until next year. Held at Summit Point Main. This was after a weekend of paving, so the paving was fresh and brand new. If anyone has ever been to Summit Point, turns 1, 5 and the carousel have stretches...

I tried searching but maybe its wayyyy too obvious, but I just wanted to check. I am pretty damn sure this blown 20g has a tdo5h housing, for an external wastegate setup. I was thinking of putting my external o2 housing setup on the 16g, so can I take the 20g exhaust housing, bolt it onto the...

Alright so im running a 2g with an fmic and an upgraded radiator and yes im working on ducting, but I was running what some of you ran for other equipment such as....coolant hoses, caps, anyting else? The hoses...I just am not sure I trust these advance auto brand hoses and a stock cap is...

Okay, I went to my local import shop and I asked about an Underdrive pulley to see if they could install it for me and they reacted incredibly negatively. They said that the harmonic dampaner would be taken out and the underdrive puley would basically act like a tuning fork on your teeth making...

Warning: LONG!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! But lots of pictures...Date: July 28/29th Track: VIR North Course Event: NASA Track Day - VIR "Heat Wave" (boy that was accurate) Class: HPDE 2 Car: 1998 Mitsubishi Eclipse GSXDecided to share a little bit about how us...

Since this was a tribute to Virginia Tech and also my friend's only third autocross, I decided to post up our experience, and if that sponsor thing is still going on get some money back :cool: .April 22nd, 2007- BlueRidge SCCA Salem, VA about 20 minutes from Virginia Tech, so the autocross...

I am slowly getting this car completely prepared to go out road racing and trying to make her as relable as possible. Done the usual things for road racing, wilwood 13x1.10 with 4-pistons up front. A 16g that will stay at 16psi, upgraded radiator, removed a/c, etc. all the usual bullshit...

Alright so ive been battling this problem all the time for some reason. I have a 255 walbro in my tank. After filling up I would drive and then stop, turn the car off and come back, and all the sudden ive lost literally an 1/8 of a tank of gas, it kept doing this so one day I looked under the...

Alright so im usually VERY careful about buying things and for the past 2 years I havent been ripped off, or if they tried I get my money back. Anyways, I get in an accident so im in a flurry of trying to buy parts, well I bought this radiator from this guy and he was also selling an intake...

Alright so I managed to blow up my center diff and rear differential at the same time. I thought I had just blown the rear and swapped in a new one. Then I go around a hard corner and my tires bind and pop like a welded center diff.Anyways I was wondering if it was alright to drive or...

Alright so I had my rear differential blow up on me and replaced it with another 4 bolt lsd rear (I hope). Anyway so I start to drive it and I am getting a very apparent vibration from the rear. VERY apparent. Then around turns I heard something as though it binds and then POPS. If I go...

Alright, so I blew up my ####ing rear differential, I get a new one and put it in, putting the subframe back up and the ####ing stud from the chassis to subframe breaks in half. HOW THE HELL do I get to this stud? I am about to cry right now as this is complete bullshit. Its the passenger...

Alright I was doing an autocross on a very rough course using my launch setup for control off the line. I was doing completely fine until I started driving home. I could get this awful smell through the cabin and was wondering what happened? so I look under the vehicle and tell that the smell...

The date was 5/20/06, the day before was preparation and getting my car ready as it was completely in pieces. I had put my car down for fmic, gm maft setup and 1g throttle body. I was lazy and kept putting off getting the work done until that day in which I realized I needed to get it running...

Anyone had any experience with the aluminum radiators on ebay. I Am looking at external oil coolers, slimline fans and an aluminum radiaiator and thes just sparked my interest. Anyone know anything?

Well, these are a few pictures of me and my friends on our way home from college. The black dsm is mine. Both the white and black dsms will be having Front Mounts installed as soon as we can get em in my garage. Both of em running big16gs. I wont go into too many specs unless asked. Dj...

Alright so I got this BOV off this guy and I wanted to know if it was a real HKS bov.IT does not have the HKS written on the side, he said he polished it off. The middle section says Sequential Blow off Valve. Any other things that could hint to me wether it was real or not? MAybe a...

So a few members of Madison Motorsports located at James Madison University went for a drive. Thought id share a few pics (im procrastinating studying). The black eclipse is mine running my winter/track rims.One of the other dsmers of MMOh...and the...

Alright so I installed my fuel pump and im ready to do the rewire and I notice there are 5 wires instead of 2 like in the fwd manual on the vfaq. Which wires am I supposed to cut and tie into? Mines a 98 Eclipe GSX.

Alright so I bought a whole 2g maft setup and im putting it on but I also have dsmlink, but not on yet. Lets say I was putting the maft setup on a completely stock car. What settings would I have on a completely stock car. And once I put in my dsmlink, what settings should be the MAFT setup then?

Alright, I am playing around with tons of different options and since I dont really want something a lot of people have (candy apple red, a nice black, pearl white) ive come up with a nice little color. Its the 2001 dark suburban green with metallic. I think it would look hot...anyway I found...

I was wondering if anyone knew of a place that made this. Or maybe if we got a bunch of people together and put a downpayment to a place like whiteline we can get custom ones made. I absolute hate our stock endlinks and I need to replace at least my front ones so there is point in me wasting...

There is a new manual boost controller from Joe P that is inline. It looks very small and is made out of metal. Has anyone gotten this yet? Its Joe P so I almost want to trust him. Its cheap and I need a new one and I hate mounting controller so it would be nice to have something like that...

Alright I got some used FIC 650cc injectors. I need to know what gaskets or o-rings or insulators I need to get beyond what is on the injectors right now. Here are a couple pictures of the injectors..

Alright I have a 98 Eclipse GSX manual and I plan on throwing a big16g turbo, FIC 650CC injectors, 255 fuel pump, afpr, and fmic. Now I need tuning.I do not have an s-afc, but the maft says it will compensate for injectors. I Figured I could throw on a maf-t compensate for injectors and...

I just bought used FIC injectors, however they do not come with anything else I beleive. What o-rings, seals, and insulators could I possibly need? I like to make sure and yes I used the search but it was asking about a specific thing, and I Am making sure that I Get everythign I need.

Now I have had pretty good luck with ebay in terms of megan racing and other products in making sure I got good quality products. Although many people disapproved of ssautochrome housings in saying they did not fit quite right and that a few modifications would be needed I was weary but a few...

Could someone with photoshop help me create a 170 pixel wide avatar that will work with the forum? I dont have photoshop and the image becomes all crappy and shit...maybe add some cool little crap it would make it so much cooler. I am going to use it for other forums also, so maybe putting in...

Alright so I got the components and everything inside my door so that you cannot tell it did no come factory that way. Now I want to put the amplifier in and I have a question. I am installing the amplifier in the stock amplifer position (under the passenger seat) and I was wondering if I just...

I just noticed the Megan Racing coilovers on the speed factor's website. I was wondering if these are similar to the D2's, or if they are better in any way? it says that there is a 14kg spring in the front and a 6kg in the rear. It seems to me that this would make more weight transfer to the...

http://cgi.ebay.com/ebaymotors/QA1-Fully-Adjustable-Coilover-Kit-Eclipse-Talon-Laser_W0QQcmdZViewItemQQcategoryZ33590QQitemZ8017886968QQrdZ1What is the optional double suspension for the freont and rear??These guys seem like they know somewhat what their talking about. Just wanteed to...

my friend is in auto-cross this very minute, he needs help. He currently has a big 16g, and he just noticed that his boost controller has no ball or spring in it. He is wondering if there is any way that he can get his boost down to 10-12 psi?

I just wanted to make sure with other people that this is a real evo 3 o2 housing. Would I have to shave off that part that sticks out to fit it up to my 3-inch 02 housing?http://cgi.ebay.com/ebaymotors/Evo-III-o2-Housing_W0QQcmdZViewItemQQcategoryZ33742QQitemZ8018236376QQrdZ1

Alright so I like their products and have used their cat-back system and downpipe. They seem to have extroardinary qqualities in doing exhautss. Anyway since they dont have dsm specific 02 housings and turbo manifolds, why wouldnt an 02 housing from an evo8 work? I have a Big 16g and I would...

http://cgi.ebay.com/ebaymotors/mitsubishi-eclipse-95-99-full-race-suspension_W0QQcmdZViewItemQQcategoryZ107061QQitemZ4589956587QQrdZ1What type of suspension is that, I cant figure it out. At first I Thought hey, shitty ebay, put its got top mounts that look to be pillowball, and the...

Alright ive searched but im just confused by the wording, I feel like a complete idiot but rather safe than sorry. Just installed a Big16g on my 2g and I Was hooking up the vacuum lines and ran into a little problem. Now ive read through the VFAQ and looked back at it several times, (I am one...

Alright so I have an eprom ECU waiting around in my room for my 98 GSX. I was gonna wait till I got dsmlink to install it. However I was talking to a shop and they were like, oh you have an eprom? Why donty you install it. I was like I dont have dsmlink yet. They said that switching over to...

Okay so ive had this electrical gremlin since I bought the car. The car would lose battery charge quickly and also during driving, if I have more than two accessories going (AKA windshield wipers one, headlights two, radio three) then the car would not have enough energy to keep the car going...