Hi guys.
This is next part of my build..Prewiously wanted start new thread after finish my build.. but got some free time so why not start it now..
Gotta say Iam owner of this 2G AWD since 09/2003! so its kinda evolution LOLFirst of gotta say BIG THANKS to my friend Tyler Hassing from...
Today received brand new KELFORD cams and put the cams into head without valves. found BOTH camshafts moving in journals!..I can Waddle with both camshafts when sitting in head journals!! which is really big problem..!I wanted spin this engine/head to 10k rpms with boost up to 50psi! When I put...
Bought used built head.
This stuff should include..
Supertech Nitrate coated SS valves/STD spec
Kiggly race Behive springs
Race port
Bronze valve guides
Competition multi angle valve jobLet me know what you think about port job please.. I'm not knowledgeable in this way.. To me its...
Hi to all,
I can get great deal on most of dry sump kit stuff.. it comes from EVO7.
Kit include the oil pump w sprocket, then sprocket for cranksahft, then some fittings and lines..as for oil pan.. since our is made from metal.. no problem fab/build myself...What Iam scared...
Hi Guys.. this weekend just finished my M/T to A/T swap in Sunday.Same day was on test drive and all worked L-1st,2-2nd, D- 3rd and switched OD, of course Reverse worked too..in Monday was on another test drive. before she warmed I was just gentle on her.., later came to crossroad for...
Hi All:DThought I could share my build with you guys . Never seen anything that BIG in 2G engine bay:hellyeah:
As every year..Iam changing again my setup..:coy:
Last year found thread about guy which put holset HE351 VGT and spooled 35psi at 3500rpms or something.. that way I thought umm...
Hi all,
just finished my HE 531V build and took her on drive on first time... car was pretty slow spooling but didn´t cared .
second day after fixing some oil and coolant leaks drove her again.. and again she won´t spool at all.. But thought its becasuse my 60mm silnecer in...
Hi Guys, Not sure If I should post this here..Looking for upgrade my oem 105k miles old coils.. Since Iam from Europe I can get dirt cheap deals on Bosch stuff..My question is may I use these ign coils on my 2G? Is there advantage of using these..??? Is possible wire these coils into...
Hi,
installing Prothane master kit and all 4 sleeves in rear lower control arms got big play in arm..?? WTF.. How I should fix that??:ohdamn:weld sleeve w arm??Rear Lower Control arm DSM eclipse Prothane / sleeve got PLAY in arm - YouTubesecondly, installed all bushing onto rear...
Hello everyone, found keydiver is not burning chips for new customers..and I need chip for my new FIC850cc´s...anyone know who/where to get chip..new or used...:pray:Thank you
Venca
Hi fellow DSMers found keydiver not burning new chips and I need chip for my buddie and his 1G 90´AWD.
He got FIC 850cc´s and 90´ style TB.
Doesn´t matter new or used.. need just run those injectors on local dragday :)Payment via Paypal and if possible..need to ship it over sea to Czech...
hey every1..need ASAP answer on this...
May I use this T belt for my setup....9k rpms and 2.4Bar boost on pump???something has to jumped into my Timings... thanks god I found it...could lost my engine..damn...Let me know please...
and secondly anyone here can ship Power ent belt to...
Yesterday was drag day here in Czech republic.
Was pretty warm like 25deg of Celsius.All the Vettes was there incl ZR1..Porsche 996 turbo...blah blah:p
went 30PSI of boost on EU 100Octane /same as US 94Octane
Thnks Steven for help with tune:thumb:went 4 strips with best of 11.2@126MPH
I...
Here is the Deal.2.0l, 8.5:1CR,wanna twist it to 9k+..if need
T3 3582R with 1.06AR hotside,3.5" FMIC from Bullseye power
1000RC ,Jay racing Bosch 8AN fuel setup with Intank wallyWhat is some max boost I can run with keydiver chip stage3 on 94Pump gas( we got 100Octane euro spec made...
Got use old Crower rods and wanna install new crower alu-bronze bushings..
So ordered 5 new pieces from Crower and let the bushings installed...
First off we used press to uninstall old ones..was straight and okay...then we put rods on table cooker to warm it..Got laser thermo meter..so we...
Bought 6B longblock for my build...Now is on pieces..and founf my 4th comb chamber was damaged before and that guy repare the thread..check up pic.I know that guy run on that rebuild stock engine up to 5k km..with 16PSI on 14B..My question is..I wanna turn 35PSI on 35R..is this head...
hey,
Got T3 GT3582R with huge 1.06A/R Hotside..
details:
for new seasson Iam working on new setup..built 2.0l Crower/mahle/ffwd cryoed crank,6Bolt head with BC 280cams,buschurs single springs,bit port work. BEP 3.5" FMIC...
DSMlink,PLX WBO2
ordered DOG box:sneaky:
my target for this...
hey,
Can anyone identify if my new Front cover is REAL Top Line brand..??
I don´t wanna use something worst in brand as Top Line esp. when talk about oil pump..
VencaGSX/2G 95 AWD/new stuff for my build - Photobucket - Video and Image HostingThat ebay seller was selling whole Top Line...
hey,
Local guy got 2G GS..and he wants to turboed his engine..its 4G63 N/A..he wants to buy from me my 50 trim,FIC 850s..whole setup..
Target 300WHP..
So we wants to put the oem turbo pistons and rods inside his N/A block.. with cometic and ARPs..
How to check the ECU..??he is 98year.. so...
Hey,
bought 1G AWD with burned engine bay..
seller already cleaned and part out whole engine bay.He bought two different ECU wiring harness...and I need to find which are the one I will use...One of those Got all the ECU plugs same..got same all the plugs which are inside the car...So I...
hey,
Do you know some shop in U.S. or somewhre on this planet I can send my SOHC 6Bolt crank(std specs) for micropolishing,Cryo treat and balanced whole rotary assembly(will send my pistons+rods..Carrillos+Mahle+ACL race)wanna turn 10k rpms and Iam affraid of my SOHC cranks performance..So...
hey,
Here is my problem.
Went on local road on full gas:cool: (curves)
And lost my External dumb for wastegate..(didn´t know that)so all the exhaust gasses off the WG went directly onto Alternator...
When was on the end of this nice road my Cels starts blink (Charging,Hand brake-they...
here are few logs I did today...
18°Celsius,sunny..using Stock 2G timings,
Fuel..set to 11.1:1 threw RPM band
why knocks at low boost at stock timings??
any input will be great!!!In that last log(its driven in the city...check only 79.63sec..
which other values I should...
as title says...Iam wondering when someone needs Eagle crank??
Iam befor engine build and Iam still thinking on my setup...my final target (dream)is 9.99sec on 1/4mile
I know many guys runing 10 and 9sec slips with stock 6Bolt crank...evil eagle:thumb: ...nex is that thing..My crank will...
hey guys,
before 3days found and bought 90Eclipse AWD with burned engine bay for pretty cheap..LOL (find Eclipse awd..1G or 2G is REALLY difficult!!!esp in Czech republic!!!..hey I got 1G and 2G AWD:p :sneaky: )there is some work with it..but wanna use this car just for race..:DNow my...
hey,
Iam in beginning of proces of build my engine..Iam thinking to make a 6Bolt Swap..So Iam searching for details on few forums and web..RRE,Magnus site..
Today found this forum..and have to say Iam very confusedthats the first post:by lancerman
Just completed my first 7 bolt swap...
Hey Guys,
This is story of ONE Czech DSMer.
be patient with my English:cool:Whole story starts at 4th September 2003..After year or so found 2G AWD!!ONLY ONE 2G AWD in Cwhole Czech..now I knot total of 3awds noone other is modying their DSM .
Have to say..my DSM had ONE problem..my 3rd...
hey,
Can get great deal on used Garett GT35/40R,Can get for 200usd:thumb: run 5000km.
BUT! guy telling me I need new bearings,told me its not for drive it. Is it possible to check some Bearings rebuild kit like for my T3/T4?May I make by myself? friend of mine got car service and can use...
hey guys..
Can you post or send pics of your Only VIS Racing CBF hood..
Wanna be sure about my hood!
my email: [email protected]
here are mine..let me know if its originall or some fake..:confused:
As title says. Iam going to make custom tubular manis...Reason..$$$:cry:
DNP cost around 600usd plus 150usd shipping + 5% money transfer+ 24% of customs duty...:barf: :barf:Actually right now I got burned new exhaust flange and turbo fllange,- draw with Corel Draw software and I draw my...
Hi,
within month or so...will be building my own 3"custom Exhaust system..O2housing-Back.
will make from just mild steel..:|My question is to weight..howmuch weight your complete..Downpipe+Cat-back...Apexi N1 or some performance SS exhaust?
And to Muffler...
Is really needed:cool...
Hi guys,
my denso Iridium sparks died after almost 3k miles!!!:barf: ! paid 100usd!!!in Czech republic...
They blown..between ceramic center and metal part..(hope you understand me...) 3of 4plugs..
Well, I was very suck/100usd sparks!!! Same day call to my dealer,sent my sparks to him for...
Hi,
got problem..
I wanna get Chip from Jeff O stage IIIsome details on begining..
-In Czech is standard 95Octane
my tuning tools:
Maf Tanslator,FPR,Datalogger,EGT,A/F led gaugemy problem is .. I wana cruising 15PSI@95Octane and for Drag race wanna 25-30PSI on 100+Octane.Now I...
Hello to Everyone,
yesterday I found on internet this car(check pics) is for sale at one Portugal car shops..
I would like to buy it.. it is for ..4200usd
I found on the car sticker member of Dfwdsm.org dsm club in Texas..I think
That Seller sent me lot of pics.. If you know this car and...
Hello to everyone,Iam living in Czech republic.. and it is impossible search some stuff in my country on my car.. I have to translate everything and have to check and check.. (sorry for bad English :thumb: )I got 2G 95 Eclipse Awd.. Only ONE in my country...
I started with some...
Hello Everyone,
Yesterday I finished instalation of my new 3" KaN Inverted Air filter, I did my own "flange" for stock Maf.
When install ..looks nice...,Then start engine..still nice,
Then made test run. :cry: Car won´t run fast to rpm´s..It is like the intake is "confined"and car is...
hello Everyone..
Wanna buy new CF hood Invader style from VIS racing..
Wanna ask if there is any difference between 95,96 hood / 97up? hood? Fitment?
THX
Hello Guys,
Did Anyone of you Know something about SportCompactPro???? (SCP) I registered on their web page and last week I received a Contract!
That whole contract "sounds" and looks Very WELL!!! I can ordrer Performance parts for 12.000,- USD!!! Only For driving on minimum 4 meets with...
I bought used ABS module(my is damaged).Looks little bit different then my stock.Look on pics. Got question:
Will be working on my 2G 1995 eclipse GSX???
Both are made by NIPPON ltd.
Got differnce numbers on their lables MB .....
Hope you understand(living in Czech republic)
Thank you...
Got problem..Is there some diference between ABS module??
Driving 2G 1995 Eclipse GSX
My stock Abs module is damaged...I bought anotherused from eclipse96(dont know if it from Rs,Gs,...probably it is from non turbo)
When I "scan" my new module I notice,there are some diferences-
first-On my...