So, each year, I typically take a loose inventory of parts that I have that are discontinued, hard to get, used items of value, etc....basically to put limits on my hoarding which gets out of control at times.I typically put the stuff up on Facepage, but this year, I'm going to put them up on...

We're starting to put our Christmas presents under the tree for the *other*, old, fat, hairy guy to come an pay us a visit!The disco'd MD726235s were the first to make their appearance:We found them to be lonely, so we dug up some other friends who have been scarcely seen of late to join...

We've been slowly chipping away at finding quality solutions to Mitsubishi's ever-increasing pricing updates, and lack of availability. It was great being able to get a quality timing kit from Mitsu back in the 90's and just move forward with the job. No one even bothered to look at Gates...

Doing some year end inventory, and looking at some parts that we have in stock that are now disco'd.This list will grow as inventory continues. Sales will (obviously) be limited by what we have. I'll be in the area of the shop this weekend working on getting our upper building wired to get...

I was emailing with another OG DSM owner tonight, who is rebuilding a 1G AWD for his son.He contacts me when they're working though another segment of the car (MUCH appreciated, and I'm honored), and today, we've been working on rebuilding the driveshaft on said car.He's already purchased...

By some freak miracle, we not only received another order of Yokes from Mitsu, but actually in amount more than 2-3.8 just came in today, making it the most we've had on hand at one time in the last 5 years...

Back again to spread some doom and gloom cupcakes with some good-news sprinkles on top (as usual).Like everything else right now--prices keep going up. Mitsubishi has had a hay day over the last two months with raising prices to meet up with cost inflation. We're working on updating...

A couple of quick things.1) We obtained a handful of 6-Bolt timing tensioners from overseas. *******PLEASE READ THE FOLLOWING CAREFULLY BEFORE ORDERING********: We sold out of the last batch in about 24 hours--leaving us with no inventory to sell timing belt kits. We are only selling these...

After waiting over a year, we've received some of the back ordered ARP 6-bolt head studs that have been next to impossible to get.We're still awaiting a lot more to come in, but the ones that arrived have filled all of the back orders we've had and left us with (2) remaining sets available...

UPDATE: 1 Yoke and 1 u-joint leftSo, the last post was 01/26 of this year about getting a few of these in: https://www.dsmtuners.com/threads/a-very-few-u-joints-and-yokes-back-in-stock-for-the-moment.536591/While we have these on constant back order status (as noted in previous post above)...

Edit: 05/15/22 11:51AM ******THESE ARE NOW SOLD AND ARE ON BACK ORDER STATUS. WE WILL UPDATE THIS IF WE FIND A WAY TO OBTAIN MORE**********I'm starting to feel like the Grim Reaper around here, so I'll start off with saying that they're *NOT* discontinued (yet).That said, as is typical of...

I'm starting to feel like a parrot in here with posting up bad news about parts being killed off by Mitsu---please don't kill the messenger. :-(Mitsu has officially disco'd the MD308586 timing belt tensioners.We have the last one coming in over the next day or two, but after that we'll be...

1G and GVR4 suspension parts are getting harder and harder to find. Springs for the GVR4s are basically non-existent at the moment after manufacturers have dropped producing them, and 1G stuff is getting more an more limited.We've been a KSport dealer for many years, but after seeing some...

We are sold out of these, but just wanted to make you all aware.MD302262 (2G Throttle Body Elbow Gasket) is now a discontinued part and are no longer available.If you're in need of these, you may want to try to find someone who has some left in stock and grab them while you can.

****************************THESE HAVE ALL BEEN SOLD****************************************We try to keep on top of discontinued parts as it's getting more and more common these days, and try to keep you informed.The MB526956 bearing kits (...

We've kept a running stock of these even though they rarely come into the U.S., but we just went to order more MD735585 transmission cable brackets for the 91-94 DSMs/91-92 GVR4s and they're now officially discontinued.We have two remaining for anyone who wants them before we wipe them off of...

****UPDATE***: Yokes are long gone (they actually over-sold before I could update them). U-joints are down to two available (received another today).Just received two yokes https://jnztuning.com/product/updated-yoke-for-90-99-gsx-tsi-and-91-92-galant-vr4-mr111611/ and four u-joints...

UPDATE: Yokes and U-joints are gone. We will create a new thread when we receive more.

I placed an order for 95 AWD vented rear rotors back in April, as aftermarket vendors were discontinuing them as well and of course, Mitsu didn't have any.I didn't think that we were ever going to see them, but today Mitsu dropped off a box that was a lot heavier than expected...Inside were...

It's been a bit since we've posted an update, and this year has been the worst I've experienced with Mitsubishi in 25 years...That said, we've gotten a bunch of parts in recently that have been on back order status in the U.S. for months, and news of yet another part being discontinued...

So, for the seemingly millionth time, I came across the 'ol "Should I run a Gates Timing Belt Kit?" posted on "The Facepage".Having a few free minutes I decided to weigh in, and ended up writing a long, perhaps somewhat garbled response found below. Whether you agree with it or not, if you...

UPDATE: The first crate of 32 has sold out in less than 24 hours. At this time we are not taking additional orders. We have the last crate of 19 coming in 11/12 of which, almost half are pre-sold. We'll update this an re-enable them on the website once they're in-hand and ready to ship.We've...

We've recently installed a new chat function right on our website!If you're having issues finding a part, or have a question, please let us know!Just click on the orange circle on the right hand lower corner of the page, and we'll make sure you're pointed in the right direction. Even if...

We're happy to announce that after a lot of work, and a really good web company, we've salvaged what was left of our 13 year old, former website that was killed by our old web company's ineptness!There is still housecleaning to do, so please don't mind some of the photos that didn't transfer...

As many have noticed, our website is regrettably not functioning correctly.Our hosting company attempted (without prior notice) to move our site to a new server, which is incompatible with our site. Which has left us "high and dry" for the momentWe are currently working as quickly as...

We just wanted to update new connectors that are (finally...these things take time to research/order/make sure that you're getting 100% legit parts) ready to roll and fix your wiring harness needs.Mitsubishi keeps discontinuing harnesses, and have rarely offered solutions to individual harness...

I've been sitting on these for a couple of weeks, and just need to "rip off the band-aid".We've located two sets of 1G, NOS (new original stock) Door Window Belt Mouldings.Fist come, first serve. These are being sold at MSRP (not above), and only in complete sets...

Finally, after a long backorder:http://www.jnztuning.com/product_info.php?products_id=4074http://www.jnztuning.com/product_info.php?products_id=3079

It took forever, (and a few days) but we've gotten 3 sets of the Outlander Caliper Brackets back in stock.I've enabled them again on the website: http://www.jnztuning.com/product_info.php?products_id=3570As stated, we only have 3 sets at this time. I typically try to disable them or mark...

It's been way too long since I've had time to come on here and update the original thread on the connectors we've been carrying for a while now ( http://www.dsmtuners.com/threads/hard-to-find-connectors-for-dsms-now-available-at-jnz-tuning.474309/ ) . We've been busy keeping up with getting...

We just got a bunch of these in from the guys at Magnus.Very simple part that will make driving your DSM/EVO much more enjoyable particularly in these cold months.Magnus Remote IAC (Idle Air Control) Motor Adaptor. for DSM and EVO You upgraded your throttle body, to a BIG bad 90mm...

Hey guys, Just wanted to post up in here about these connectors we are starting to carry. Often we get phone calls from customers regarding engine wiring woes. These cars often see high under hood temps and that is brutal on wiring connectors. As many of you have found out Mitsubishi does not...

Our sales are now up and running! Parts from AEM, Aeromotive, Competition Clutch, Deatschworks, Energy Suspension, Fuel Injector Clinic, GSC, Hallman, Mitsubishi, Motul, Supertech, Torque Solution, Walbro, Whiteline among others.These will be valid from now until Sunday night, and are online...

Yes your read that correctly, we have 1, yes 1 genuine Mitsubishi Heavy Industries EVO III 16G available. $799, wastegate is optional. Sale pricing will end when this one is sold.Order here: MHI EVO III 16G : JNZ Tuning

We just got a batch of Magnus 1000 HP Fuel Rails in stock.We have polished and black anodized available, these rails look awesome. The rails are threaded for 10AN O Ring Style Fittings, 7/8" internal diameter. Made from 6061 billet aluminum and E85 safe with the black anodized version...

Hey guys, We have dropped the prices on our stainless steel brake line kits for the 1G, 2G and Galant VR-4.We are also now offering the following color options: Clear (our traditional protective coating) Black (if you want to keep it looking as stock as possible) Charcoal (a bitter...

While grabbing pictures of the EvoX ralliart tails this morning I grabbed this picture of the shop. At a time when most shops are struggling we wanted to thank the DSM community for keeping us so busy!Current cars being worked on can be seen below and we have 5 more waiting outside to...