Hey y’all, is it possible to still get new oem weather stripping for a 2gb? Asking for a friend...

I’m gauging interest to see if anyone needs all of the components to swap a 2g GST to a 2g GSX.I have all of the components listed in this thread. http://www.dsmtuners.com/threads/2g-dsm-awd-conversion.353458/I prefer to sell it all as one complete kit, so please, no part outs at this time...

I recently bought a gently used in excellent condition OEM Mitsu 4G69 7-bolt 100mm stroke crankshaft on eBay for a 7-bolt long rod 2.4L build. Due to my 4G64 block having a crack I have no choice but to let this go. This crankshaft is in absolutely pristine condition and is ready to drop right...

Any 4G63 knowledgeable and reputable engine machine/build shops in Caliifornia? Looking to get three stroker short blocks built. 2.2L 91 DSM 6-bolt 2.2L 99 DSM 7-bolt LR2.4L 99 DSM 7-bolt I've heard of Dave's Engine Machine in the Bay Area, but apparently they're busy and expensive. A shop being...

Any 4G63 knowledgeable and reputable engine machine/build shops in Commifornia? Looking to get three short blocks built. 2.2L 91 DSM 6-bolt 2.2L 99 DSM 7-bolt LR2.4L 99 DSM 7-bolt I've heard of Dave's Engine Machine in the Bay Area, but apparently they're busy and expensive. A shop being busy is...

I have a barely used JB PTE 50 Trim for sale. It's the old style DSM SCM5031RE oil-cooled non ball-bearing turbo. It's set-up for an externally gated O2 housing. It hit 22psi by 3800rpm on a built 2L.Locals, let me know and we can work something out.Classified ad is here ---> 50 Trim...

Particularly anyone with a 2.4L in their GSX pass the sniffer test in Commifornia with everything else relatively stock, ie., 2g head, 2g cams, intake pipe with airbox, 2g intake manifold, 2g exhaust manifold, 16g, 2g O2 housing, 2g DP with OE cat, 2g TB, 1g BOV, EGR, FPR, Charcoal Canister etc.?

Happy Payday Friday to all!YouTube - Ferd F-teenthousand Truck Commercial (high definition)

These are 18x7.5 +40mm offset. They no longer fit on my car due to my BBK. 1 rim has curb rash from the previous owner. $1000 for rims only. Know this, these rims have been ran for at least 75k miles.

Local pick-up preferred. Willing to meet half way.Local pick-up $50. Shipped $60.

Here is my confirmation email from Doug Gale with Track Masters Racing.Greetings TMR Drivers, You are confirmed to attend the TMR track event at Thunderhill on Friday, November 5th. This is a 3 run group format event with loads of track time! The most you'll get this season for $150...

First read the article. On the Track With the Ferrari 599XX- Yahoo! Autos Article PageThen watch this beast break the 7 minute barrier for a production car on the infamous 20.8km Nordschleife Circuit at the Nurburgring!YouTube - Ferrari 599XX sets new record on the NurburgringI figure...

Anyone have any insight on either of these two manifolds? I'm looking ahead for any clearance issues on a 2g with a Fluidyne?JMF's description on Extreme PSI's site says that a 2g needs to have the upper radiator hose moved off center like a 1g.What's the fix? Any pics would be most...

I'm going to build a 98' 7-bolt into a Long Rod 2.0L.I can buy a full Manley Long Rod 2.0L Rotating Assembly like this from E-PSI. EXTREME PSI : Your #1 Source for In Stock Performance Parts - Manley Performance Mitsubishi 7-Bolt Rotating Assembly (2.0L): Forged "Race Series" 88mm Stroke...

I'm looking for a machine shop in Northern California that can provide services just like Jackson Auto Machine, FFWD or Magnus.***Edit, I just saw my first FFWD Long Block in person last night, and let me tell you, Darren is an Artist... Now if I can only get him to build my 98 7-bolt.***...

Anyone have any confirmation if a 2gb with 255/40/17 on 17x9's w/+40mm offset clears the rear knuckle? If so, please provide Tire make and model so I can look up the specifications of the tire.According to Wret's write up, I should have ~2mm clearance at the knuckle and ~2mm clearance at the...

I know of one guy Interex that has a 2000 Galant 4G64 block, I followed his thread, but didn't get a definite outcome of his swap. I PM'd him, but I haven't got a response yet.The 8g Galant 4G64 is mounted on the passenger side and the transmission is on the driver's side.Does anyone...

So I recently discovered that Eagle's crank along with K1 Technologie's cranks share the same part numbers for both Evos and 7-bolt DSM 4G63's. So this must mean an 03-06 Evo crank can fit into a 92.5-99 DSM 4G63.According to Darren at FFWD, the Evo crank is much lighter than DSM 7-bolt...

Check this out guys, nasaforums.com :: View topic - 1997 Eclipse GSX - $5,000 and it's even in CA. Imagine the possibilites of this all out track car. Makes me wish I had $5k to burn. The weld in cage is probably $4k alone...

What up fellas? Just want to invite anyone who's up for a little HPDE in Willows, CA on the 11th of August. http://www.nasaproracing.com/hpde/index.html I'll be there for my first track day in my GSX. Another buddy will be in a Mini Type-S, and another in a STI.Come on out. All you need...

So how do you keep your spark plug wires separated after upgrading to larger than stock spark plug wires that don't fit into the stock black plastic divider?Well, I have a cheap solution for you.Here are a couple of pics that are worth maybe $1 – $2 in zip ties.This part only...

I know it's not good to do what I'm doing, so I want to ask a couple of questions. Are there any dangers of running a re-wired supra pump, an Afpr and stock 450's on an 18g at 15psi. It pulls hard and smooth. I did a BLT, and I can put 25psi in the system and it takes over 30 seconds to fall...

This is on my 2g GSX... with all new OEM Mitsu parts. So, I set the tension, and rotated the crank 6 times and everything lined up. Waited 15 mins, and I measured the gap and it was at .168". It's within the .150" - .180" spec.Called it a night. Woke up the next morning and decided to...

I have a 2g GSX. I want to rewire my supra pump for the obvious reasons, but I've read that if I do, I'll need to upgrade the hard return line from the firewall to the tank. My gut feeling tells me that the post I read was garbage and that I'll be fine just connecting the -6 AN hose from the...

I'm driving south on I-5 Friday morning. It's 4 lanes wide in this particular area. The fast lane is the #1 lane, I was in the #2 lane. I come up on a mid to late 80's Mustang in the #2 lane, and in the #1 lane, right beside him is a pickup, they're holding hands. So, I patiently follow them...

What's up fella's? I have a question about DSMLink and using it on OBDII cars here in California. Are there any issues with emissions testing that you all know of, or is it all good. I found a great deal on a 95 Eprom ECU. I know I don't need DSMLink now, but I really want to learn how to...

Congrats to ddavisaf for his new role as a DSM Wiseman. In less than a year he's made over 2,200+ posts, and is now a DSM Wiseman. That's got to be some sort of record... :thumb:

This method of clutch bleeding will work on pretty much any car. Forget about what the manuals tell you!First off you'll need the following:1) Goggles or other form of eye protection to prevent brake fluid from splashing into your eyes. 2) Get a clutch pedal buddy, a person that can...

I've searched on this, but since the migration the search utility is laggin. I have a couple questions. 1. Is anyone on here running them? 2. What are your thoughts on them? 3. Did you have any problems with the camber coming out of spec due to normal daily driving? 4. Are there any...

Just like the title says. Well I know what everyone will say, but honestly, I came across a walk thru for the conversion, and if you have a donor car.... it's a piece of cake. The only welding necessary is the exhaust/carrier bearing hangers, which locate them selves in the tunnel quite...

Check out this link. I nearly sh!t when I saw this. I called, and the lady, yeah that's right... the lady said that she sold it to the 1st person that came and looked at it. That sap took $11k cash for that car when she could have sold it for nearly $15-$20k on eBay. <a href =...

I hope it's OK to post this...., if not MOD's feel free to do whatever you'd like....Anyone out there have a use for a new Chevy 4L60E transmission. It's out of a 97 Tahoe 4x4. It's upgraded and it's been rebuilt by JET in Huntington Beach CA. It sits on a pallet in my garage and is ready...

Wadd Up.... I found this ICP kit w/Greddy BOV for a substantial savings. <a href = http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33742&item=7926931515&rd=1> IC Piping, w/Greddy BOV</a>There's only one thing I don't like about the kit.....What do you guys think?

To All: I've been dealing with a 100mph in a 70mph ticket for exactly 3 months yesterday. The fine was $420 dollars... CHP on a motorcycle dropped out of the sky and pulled me over. When he brought the ticket back to me, I said, "100 in a 70?, are you sure about that officer?" He then said...

Gentlemen: I've got a question about our cars. I think I've read it some where, but I've been searching for something along these lines, but I can't come up with anything. Car starts perfect everytime.... While idling at a light or what have you, it just pops out the exhaust once about every...

Gentlemen: I did a search and came up with this info on the above wheel dims. I want to run these wheels with 235/40/18's. I have a White GST. What do you think.