Hey guys, I just came accross this thread,and I couldnt really understand what it was that you were trying to explain jtmcinder. Can you ### elaborate on your comment.
Thanx.
:( Im loking for a site sponsor whom was selling ss brake lines and power stop rotors for a really good deal, but I Havent been around due to my fighting,and now that Im re-doing the system I cant seem to find the link. Can any body help? Thanx In advance.
p.s The search method wasnt helping...
What a perfect response. Not only did it give me the answer I was looking for but it also gave me valuable info asto why.Thanks jtmcinder as the answer to my question(s) have been answered.:thumb:
Wow what was I thinking ????????????/ Overkill.I was scared of sprung center disks ,so I thought maybe going with a reputable clutch maker and getting their solid disk would be the way to go. First off the stage four is a race clutch, and extreamly expensive to boot.So after reaserching...
Thanks guys ,for clearing this up for me, and everyother enthusiast that likes turning the wheel at speeds.DG im sorry to here your selling the car,but then again everyone needs to move forward sometime, will you be thinking about purchasing the next nissan skyline r34 which should be...
Jtoby,You stated "that if you try to run Koni Sports with coaxial hats, you will probably also have to switch to a spherical bearing at the lower shock mount, as well. Why? Because the stock rubber bushing in the lower LCA is pretty stiff and is partly responsible for pointing the shock's...
Hi guys/gals , I've been reading alot about how people really arent liking the act street clutches any more because of faulty springs and what not. Too many reasons to list.Anyways my tranny is in need of a rebuild ,so I dont want to have to worry about it for the next 3 years at least...
Could it be possible that these obx front lsd's where meant for an awd model?Im sorry but is their any differences in the carrier sizes between awd models and fwd models?Maybe John Sheppard or maybe phantom hp could answer this?
Please contact Phantomhp for any orders on the obx front lsd's.Why live with wheel hop at launch and torque steer at 60 km/hr when you can get your car to perform like it was meant to ,a sports car.
You are absolutely right ,after reviewing both o2 housing views of the turbine housings the exducer fins are actually facing a different angle.Aside from changing the exducer wheel of the turbo nothing else could be done in retro spec to using the evo housings.Why in the end would you...
OK we the dsm community have a few turbos that are stock appearing (mitsu carts) the bastard 20g and the fp sleeper 16g and a bunch of 18g turbos.I think that if either of these turbos where to be used say in conjunction with a stroker motor that a nice overall combination could be had...
First off rdrkt, don't ever call me stupid, EVER!!, such behavior and slander from a wiseman shouldn't be tolerated at all, especially from a wiseman. Its like me calling you stupid for not knowing how to block a yawyen ax kick to the knee, or a mountain storm to the collare bone. I deleted my...
Hey congrats on the new monitoring system, I'm sure you're going to love the arguments that occur in the suspension forums.If your heavy into the road racing and autocrossing, then yeah I can really understand where your going with a post like that, for some tuners it's a huge pill to...
Can some one please download and post the actual movie rather then supplying a link because I'm having some huge issues with this download.The fact that I'm on dial up hurts me like nobodies business ,so please help me out and host the download,thank you .
Yikes, please don't quote pictures. Thanks! - leetHey definitiveno you rock hard core, thanks allot for finding the pics as I'm helpless when it comes to loading pics, that and the fact that I'm on dial up really kills it.Unfortunately my hood doesn't look as pretty as his hood since...
Hey guys, well to make a long story short I copied Jesus Riveras drag car hood.Basically a friend and I measured and cut a rectangular whole in the front center portion of the 2g hood which sits right over top of the exhaust manifold and turbo.The trick was cutting a straight edge U...
I agree whole heartedly with jdm4g63 on this one. I hate misinformation , why because I can bet my car that half if not 3/4 of the tuners whom have posted in this thread never owned the 4g63 tubular manifold from ssautochrome. I know because I've seen their cars and have spoken with them face to...
First off thank you GSTinCO,irish_love,its3much, for your words of confidence and reassurance.I was a roofer and construction worker , changed fields and got into the retail environment only to excel and become management material, but I was unhappy.Like many people out their in the...
Thank you for actually giving my written words some thought. I don't expect each and every single tuner to be perfect when it comes to grammer, because I highly doubt anyone could possibly be perfect in that sense, but and this is a big but, I do expect better mannerisms from our fellow tuners...
Thanks for pointing that out IHeartTurbo but I feel my words of concern have crestfallen on deaf ears or better said, blind,spiteful individuals whom's capacity for mannerisms fall short of that of a child.
Hey guys thanks for tuning in on this thread.First off I'de like to give you guys a little bit of history on my self. I have been bouncing in night clubs since the age of 19, I have been involved with martial arts since the age of 11. I now find myself at the age of 22 training 5 to 6 times...
OK to start off, I felt unsatisfiedand and wanting more from 2f2f, I am and always will be a car guy so of course I will watch this movie out of morbid curiosity. I agree with most that this movie will attract everything from the ignorant "let me try what I just saw" moron to the very...
This question does spark my interest though , how much boost can the 450 stock injectors take?Take my car for example, I have an evo316g turbo, magnus sheetmetal intake manifold and a tubular exhaust manifold,not to mention a 3inch to 3.5 inch exhaust system and all coresponding fuel mods...
I have to agree with you ,my exhaust manifold was a very cheap buy ,and probably the best bang for my buck .Dont get me wrong my car doesnt respond as quick as when it had the t2small but im not complaining with what I have now.
To honestly answer your question my spool time at 24 psi is just about the same as yours but keep in mind my exhaust housing had some work done to it . I have received a few Pm's and will say this right out in public. Plz don't ask me how long or how many passes my turbine housing went through...
I think my post was taken the wrong way so I will elaborate. I don't look down on straight line racing, In fact I admire allot of drag racers for being able to push their cars to the absolute limit. Dialing in suspension settings for the 1320 is just as hard as dialing it in for the track, it's...
I don't think this should really become an all out we think /know this turbo is better then the other thread. First off I don't drive a fwd I drive an awd so when Placing a post I have to also consider that the thread starters car is much lighter then mine but has and will continue to have...
If anything us tuners should look at autocross as a means of truley modding our cars since most of our time isnt spent on highways but on city streets.Hey I could be wrong ,but last time I checked every true sports car was tried and tested on race tracks more so then 1/4 miles.
I would like to call myself pretty knowledgable when it comes to the e316g. When looking at making good power numbers from that specific turbo you should really look at what the max boost level your fuel system can hold. I'm very confident pushing my e316g to 24psi because I have all the mods to...
I agree with you to some extent in retrospec to lag ,but since I'm focusing more on the road coarse view for my car, lag becomes a very big issue to me. Not everybody drives straight.I apologize for my late response but work has been killing me lately, to answer your question my hp comment...
Hey guys, first off many ppl can relate to the moral dilema when purchasing an item,but since many tuners have contributed their moral and ethical opinions in this thread then we should now refrain from further posting the same opinions over and over again.I for one will not and cannot...
Hey guys good news the lsd's are made and are currently still in production because nobody knows exactly how many will be heading out.So basically we need a list of serious buyers with the car specs and how many lsd's all together per indavidual. here is some info,,as more info comes to...
Ok boys and girls lets look at the obvious,yes biggers turbos can and will make more power ,but with what sacrifice. My set up is quite close to 400 awhp in the 300's to be safe,and I love it. I was seroiusly thinking about getting the stroker until I got my car back recently with the tune up...
Ok tak finds out bunta was the one he lost to on akinas down hill path. Tak realizes he can go much faster with the subbie because of the awd layout ,and is depressed because he has pushed the 86 to it's limits and cant find a way of beating the subbie. Tak won the rain battle and kieske won his...
I am currently running 450 injectors since one of my 680's decided to stop working on me. Basically I have a true 3inch exhaust from the turbo's o2 housing straight through to my 3.5 inch magnaflow muffler. the boost is set at 10 psi and I get no creep what so ever. Maybe it's the boost...
Tubular headers will almost always out perform the cast counterparts because of how they direct the gasses. My SS-AUTOCHROME Mani hasn't cracked yet and spools my turbo much faster then my cast Mani did. Then again I'm pretty sure it hasn't cracked yet because my custom 3 inch o2 housing has a...
Honestly if the car stutters,pops or blams it's mechanical, if it just dies then it's electrical. Again bro the best thing to do is have a diagnostic check by a reputable shop.
Great links except for one thing, since he has an ecu that is compansated for the injectors his initial settings should all be 0. The AFC should be used to then fine tune in accordance to a wide band or an o2 Reading ,then a dyno to make optimal corrections during load periods.I honestly...
I had a feeling,well the way we fixed the issue was we ran an intermidiate fuse, I cant remember the voltage but I'll ask him the next time we talk which should be tomorrow.This will keep your car fuse from blowing up every time.
The answer is yes it's safe,the lines are actually run of the subframe,meaning you're supposed to secure the SS fuel line to the sub frame where you jack the car up by using a j shaped hanger which is then bolted.Just search SS fuel line installand I'm sure you'll run into some picks to make...
Check your Grounds ,all of them and check all if any soldering work that you or a friend might have done.My friend and I encountered the same thing last summer when we installed his ultra uber sound setup. I'm almost sure it's a ground ,but cant be absolutely positive since I cant look at the...
Hey guys I was reading through all 13 pages ,wow let me say it was definitely a great way to waste 2.5 hours.Somewhere in this thread and I really don't care to lookanymore something was said that sparked my interest, so I quoted it.AMS stampy
VendorCar: 94 Talon TSi AWD...
I'm not going to debate as you are right but lets not forget that clipping is also done to remove material thus also removing what could ultimately become a restriction. Maybe I chose the wrong wording? :(
Unior , I quoted you because I was personally agreeing with you ,don't take any offense I just though the link was very condescending of this topic.OK First off if you're actually going to talk about how 100th of a second would determin a win or lose then I agree with you but you're going...