Ok, the other day I was test driving my car after I installed the new sbr cast manifold. everything was good, but when i got back i popped the hood, just to check the manifold, etc. but to my surprise I find coolant leaked out overywhere. what happened was the coolant cap located on top of the...
no, it gets stuck in the banjo bolt like it has a lip on it, and is hitting it causing it to not come out. but either way, i think the problem is fixed somewhat. well see though
The piece in the picture would nto come out though. I took off the nut and tried to take out that piece with the o-rings, but is stuck in there. It has play so i can move it up and down a little, but no real way of taking it out, it looks like
Ok, but how do you get that piece in the picture out of the ps hose? Also, I added another crush washer, and it seems to have stopped leaking. Havent driven the car around at all, just started it up, so dont quote me.
i got my 3" cat from buschur when i ordered their 3" exhaust. works fine, but i had to weld on a flange to fit the 3" downpipe that was on my car already. Becuase the buschur is a slip-on fit, while mine had the 2 bolt flange
where are you running the vaccum lines to the wastegate? which port? it could be you have it hooked up wrong right now, and its just running off the spring.
Got the manifold back from jet-hot today. Looks real good. I also have pictures of it on the car as well, but they are pending in the gallery. Ill get them up soon. Overall install of it, wasnt bad. I had to grind a little off on the timing belt side of the manifold to get it in there. Its a lot...
Here's a list of whats playing in my ipod. Mostly all metal/hardcore36 Crazyfists, A life once lost, all that remains, as i lay dying, avenged sevenfold, bleeding through, Bloodlined calligraphy, bloodsimple, bullet for my valentine, bury your dead, chevelle, chimaira, damage plan, dark new...
Ok, I had no problems with my power steering ever, until I took off the line on top of the pump on time. Now, I have fluid leaking out from the washer/nut. I took out the stock lock washer, and installed a crush washer in hopes of fixing the problem. Not happening. Still leaks. What do I need to...
Hey, I know the sbr cast manifold has been discussed about. But I have not seen anyone with the new one on their car. If anyone could provide pictures and how you either like or dislike it. I bought one, but its out at jet-hot right now. I should recieve it today, and it will be on later and...
Hey, ive had my car for about 2-3 months now. did a lot of stuff to fix it up and just been lazy about it. Well, when i bought it, there were no horns in the car. So I bought a set of factory horns of ebay for like 10 bucks. Still did not work. What should I look to be doing to fix this problem...
i had the greddy type s. hated it. now i have the greddy type r on my talon. i love it. another bov i used on my corrado race car, was the tial 50mm. i like that bov the best out of any. works great
Was always into volkwagens. This is actually my first dsm. I had a mk3 gti. Then bought a mk2 gti. Did a vr6 swap in it. Motor went, and did a 3.0L turbocharged vr6. made 374 whp on only 13psi. Then swapepd the motor into a corrado, which turned into just a race car, and with the same motor...
I have had luck with sx fuel components. I use their fuel pump, filter, and fpr on my volkswagen corrado race car. Have nothing but good things to say. Now im using a sx fpr on my talon. Great products :thumb:
i've used sx fuel products on my race cars and street cars. love their products. have had fuel pump,s filters, fpr, etc. I will be puting the fpr from my race car on my talon very shortly. Aeromotive products are very good as well
All the stuff said about ssautochrome, wasn't a lie. it all happened. haha. but the o2 housings that that make don't look too bad. i don't know, buy it and try it out and tell us how you like it :thumb:
well, yes dropping the exhaust after the downpipe is the cheapest thing to do, but have you ever ran a car without an exhaust? especially a street car. you don't want something loud on the street. thats why 99% of people have a cat back
Ok, had a question about cas. On my 90 tsi talon. The cas connector is facing down towards the firewall. Is it supposed to be like that? On almost every engine bay I have seen the cas connecter is facing up towards the firewall. Also, which cas can be swapped into a 90 tsi talon. Can I use one...
Ok, you need the maf translator, 3" or 3.5" maf/ the 3 " maf can be found at several cars in the junk yard for like 30 bucks. You either need to buy couplers from 3" to 2.5" or you can just buy the dejon uicp like I did, so that it flares out to 3" already for the maf. And, an intake if you were...
except keep that black soot shit out of my manifold :thumb: Im in the process of blocking the egr and getting rid of all the emissions components, and the egr valve was covered in black crud
thats the thing, they have a 2 3/4 or a 3". The actual pipe is reduced down to 2 3/4 no the coupler. just trying to see if i can buy the 3" intake and then get a reducer to mate it with the b16g
thats the thing, they have a 2 3/4 or a 3". The actual pipe is reduced down to 2 3/4 no the coupler. just trying to see if i can buy the 3" intake and then get a reducer to mate it with the b16g
do you know the reducer size? I know forced performance sells that reducer from 4 to 2.25. So should I look for one that is 3 to 2.25 or 2.5 or 2.75? thanks
Ok, I am doing a maft setup right now, and i need a new intake. I am going to get one from dejon, but the only one that fits the b16g is the 2 3/4 intake. COuld I buy the 3" intake, and then buy a 3 to 2.5" or 2.75" reducer? Would be easier to change the couplers when I upgrade to a bigger...