Like clipto mentioned it sounds like you just need to bend the dipstick slightly to gain the extra clearance needed.You can always email us at [email protected] with any technical or installation questions you may have.Tim
The bottom flange on our 02 housings have a 2 5/8" opening which we expand the 2 1/2" pipe up to fit. I can see how it would appear to be a step down but there is actually a slight step up in the inside diameter of the pipe where it meets the flange. Porting that lip down wont increase the id of...
Yes I would take off the hangers and if necessary unbolt the catback. They can put quite a bit of tension on the downpipe making it difficult to get everything lined up properly.Tim
Our o2 housings have the same angles as the factory o2 housings we check our fixtures weekly to ensure they stay in spec.It looks like you have a fairly short bolt on the one side that is pulling that side up. I would recommend using longer bolts and drawing them up evenly. Make sure if the...
Tial recently changed over the spring coloring and it looks like we shipped you the old chart with the new springs. Sorry about that.Here is the new chart:This comes straight from there website:
http://www.tialmedia.com/documents/MVSspc.pngTim
There wont we any fitment issue, 99% of the aftermarket o2 housings are 2.5" (including our own) and we've never had any issues mating the o2 housings to the downpipe. The only major fitment issue is when using our downpipe with the stock o2 housing and thats mainly due to the factory studs...
Our 3" DSM downpipe is almost identical to the Megan Racing version and we always have them in stock and ready to ship.PUNISHMENT RACING 3" DOWNPIPE FOR ECLIPSE/TALON - Punishment RacingTim
Punishment Racing
I apologize if you had issues with our fmic kit. How did you attempt contacting us? We can be reached via email, the contact form on our website, live agent on our website as well as by phone.I just went through all of our contact logs and couldn't find anything regarding FMIC kits that was...
I'm pretty sure the emusa 38mm wastegate is very similar to the Tial so fitment shouldn't be an issue. You could always ship it to us just to make sure.Tim
DSM Performance Parts
It looks like we accidentally shipped you the VR4 version like we had discussed on the phone. Ship it back and I will make sure you get the proper o2 housing and refund you the shipping costs. Sorry about the mixup.Tim
Punishment Racing
I've never heard of anyone having clearance issues with the o2 sensor on our hand built o2 housings. If anyone ever did have that problem we would have taken care of it immediately if notified about it.We used to sell a cheap imported recirculated o2 housing on Ebay, and I know a few of those...
The 2g downpipes do delete the converter...I've never installed a SRS exhaust so I'm not sure if there is any compatibility issues or not.Shoot us an email along with some pictures to [email protected] and I will try to figure out what the issue is.Tim
DSM Parts
Its the end of a nameplate that had already been neutered and ####ified beyond recognition. Hopefully we see it come back like many of the muscle cars listed above but I have the feeling the last truly bad ass Eclipse ever rolled off the assembly line over a decade ago.Tim
DSM Parts
Check craigslist for a used unit, you would be surprised how many almost new welders you can pick up up for a fraction of the price of a new one. If you've never welded before and are just looking for something to learn with a mig welder is way easier to learn the basics on. Don't worry about...
Nice work!!Any street car that runs sub 7's in the 1/8th is fast, the only problem is then you start wanting to hit 6.50's and after that its 6's. Damn this insanely addictive hobby and its never ending goals:pTim
DSM Parts
I have no problem with constructive criticism, no part is perfect and there can always be improvements made that help give a better customer experience. Most of the improvement we have made on all our parts have come directly from customer feedback.I welcome input from our customers which...
Are you serious?? You can't figure out how to install a kit that over 1000 others have managed to and now you think your some kind of customer service expert who is going to come on the forum (that your a newb on as it is) and talk crap.I've been at this for almost 10 years and I guarantee...
9 times out of 10 this ends up being an air in the cooling system issue. Did you burp it properly after installing the radiator and try replacing the radiator cap?Tim
Punishment Racing
robbo185 I think Mike already responded to your email about this. That is the line where the cast end tank is welded to the sheet metal, this area is normally blended and polished but it looks like yours missed that part of the process.Did you contact us for help installing your kit? What...
If you have any questions about the Punishment Racing kit feel free to shoot us an email at [email protected] always we have dozens of both 1G FMIC Kits and 2G FMIC Kits kits in stock and ready to ship :thumb:Tim
Punishment Racing Blog
Our kit isn't held on with "bailing wire" there are bungs on the bottom of the core for it to be mounted with brackets to the chassis of the car.Currently the kits are designed to work with either 1g or greddy style bov's you can find the kits here on our website:1g kit:
1G FMIC Kit2g kit...
I might have a o2 housing I built awhile ago for another customer who never paid us that will work for you, I will check the shop and pm you if we still have it
We have a brand new website thats much easier to navigate www.punishment-racing.com and a dsm specific website that carries only our best selling parts Punishment Racing DSM Store. The last one we had was a pain to find anything onTim
Email us all your info ([email protected]) we are direct with Titan I will talk to them in the morning and see if I can get some info about the order for you.Tim
www.punishment-racing.com
There would be additional costs shipping the kits to Canada, send us an email [email protected] with your shipping info and we will get you a price asap.Tim
Punishment Racing DSM Store
Nice work!!! It's amazing what these turbos can do, we have one sitting on the shelf that I'm trying to decide what to put it on.Tim
Punishment Racing DSM Store
Punishment Racing - Punish The Competition - Homepage
Haha hilarious song, would you be interested in putting this on our Punishment Racing DSM Store website? We would love to put it up there for everyone not on dsmtuners to enjoy it as well.Mike
Punishment Racing - Punish The Competition - Homepage
Punishment Racing DSM Store...
BoughtMike
Punishment Racing - Punish The Competition - Homepage
Punishment Racing DSM Store
punishmentracing | Facebook
punishment racing (punishmenttc) on Twitter
punishment-racing items - Get great deals on mishimoto, AEM items on eBay Stores!
Good work on the manifold looks better than some shops ive seen.Pie cut downpipe looks good tooKeep up the good workMike
Punishment Racing - Punish The Competition - Homepage
Punishment Racing DSM Store
punishmentracing | Facebook
punishment racing (punishmenttc) on Twitter
Hey,
Our FMIC Kit let you keep the foglights, our kits are always in stock and ready to ship out. If you have any questions on it or want some pictures of the kit installed PM.Mike
Punisment-Racing