Mitsubishi launched its newest Ralliart variant in the Japanese market this week - the Colt Ralliart Version-R.Powered by a 1.5-liter, DOHC 16-valve, four-cylinder MIVEC turbo un der an EVO-esque hood vent, the little FWD pocket racer is motivated by 154 hp, turning 16-inch alloys clad with...
Just some info on some 2G parts. Was trying to find a part for 98TSIAWD today and found out the part was discontinued.2G 5 speed manual shifter cables p/n MB910538 is no longer available form Mitsubishi.
Checked with Mitsubishi Vintage Parts and found they were not available there...
Well, finally posting up some pic's from my trip to Japan. I was there last week and had a blast. First pic is a 06 Evo 9 wagon. 2nd is the interior shot. It's an auto, this car was at the Mitsu dealer fully dressed out with gauges.
:D I'm leaving Friday and heading back to Japan. It has been 6 years since my last visit. I can't wait. I will be bringing my camera as planning on taking tons of pictures. It will be good to get back to my old stompin' grounds and catch up with some of my friends. Got plans for some...
My Drivers side door box was missing a small piece in the corner as well as my door panels felt weak and and is if they were falling apart.Keep in mind, you will be working with quite a few plastic parts. Plastic is not strong and aged plastic is brittle. Take your time and don't Man...
Just snapped some pics of a customers car. It's 06 eclipse with the factory body kit Just thowing it up so people can see it. I am not a large fan of the 06 as I have a 95 GSX. He's going to try and tackle the wheel gap next. I think the body kit makes it look a little better.
I got a faily stock 95 GSX. I have 131,xxx on the OD. It has been babied since day one. I have a stack of recripts for everything that has been done. I had it checked over for crank walk and no signs at all. The Mitsu tech said its the best taken care of near stock Eclipse he had ever seen...
Well I am now offically part of the non-drivable dsm club. At 129,xxx my car sounded like it missed and then there was no power going to the drivetain. I stepped on the gas and tried a lower gear but nothing happened except the rpm needle went up and my car kept coasting. Then the motor died...
I just made the move from North Dakota to Florida last month. It is so much better than the cold. I totally aced a new job in two weeks. I got hired at a Mitsubishi Dealer as a service writer. After a week on the job I was pulled aside by the GM and told I was doing a great job. The...
Went to the Black Hills last weekend and had a blast. Lot's of well surfaced twisty mountain roads. Not allot of traffic and a really beautiful area. Met Herostar In Rapid City and hung out with the people a bit. Posting some pic's:
The news finally broke in the States.My wife is Japanese and thru constant contact with friends and family in Japan heard Mitsubishi is in a world of sh*t. I was told they have been covering up safety recalls on vehicles in Japan. They were caught and basically put on probation. I heard...
I am going to post this up, I know there are allot of Idle surge issues posted already but mine seems to be different I got a 95 GSX with minor mods. The most extensive engine mods are UICP, 1G BOV, LICP, MBC, Intake Pipe and K&N conical Filter.History:
1 year ago got idle surge bad...
Here's how a sale is to go.So Im selling some stuff and I get a PM from a guy saying he wants to buy a part. We agree on a price and he then says I have to send you a money order as I dont have a pay pal account. So that is fine we will just see what happens. I then find that he is...
Hello,Well I have decided that I am finished with the cold and snow. I am living in North Dakota and have had it with the weather and situations. I want to move to Florida. My parents have a place in the Clearwater Tampa area and I have visited them twice. I loved it. But I was on...
Saw that next Monday on Monster Garage, Jesse will be making a jet powered Toyota Celica. It's the most recent body style. Can't wait to see how that will work.
I hope this is the right area to be posting this. I already know what the problem is so need your answers to figure out the next step. Here's the deal:My friend has a 90 Laser RS Turbo. Really been dumping money into it. Head, Head gasket, Timing belt and associated belts. You name it as...
My friend has a digital camera for sale at a very reasonable price. He doesn't need it anymore because of a lengthy stay at the hospital. To give you an idea about its capabilities and superb picture quality I've attached a recent picture he took with it, actually the last one he made.
I finally finished it. A little back ground on this. I started the conversion last summer. Didn't know what I was doing but wanted to get the 97 body kit. Got lucky and picked up the front, sideskirts, rear, turbo wing, fogs, clear corners and reverse lights for $400.00. I made a major...
Just wanted to wish everyone a happy, safe Fourth of July. I myself will be grinding, sanding and doing other body work to get my car done. Should have finished pics up the week after. Gonna take some time off to blow up som sh*t though.Have fun,
Howie
Sorry don't know where to post this so putting it in the hang out. I am repainting my 95 GSX and need to find out where I can get some weather stripping and seals. I have searched the web but can't find any. Don't want to have to pay Satans ungodly prices. Any ideas or sites you can give me...
Okay here is a brain buster:Anyone ever have a leaky trunk?
Let me explain. In the spare tire area of the trunk there is a washer fluid resivor. No fluid leaking from that. I have noticed water in my trunk once in awhile and also if there is no water I see slosh marks from dried up dirty...
Here's a little info for you on the ICS / idlesurge:Mine went bad in my car. I had Idle surge bad and the Mitsu Dealer Diagnosed it as a bad ICS but wanted $330.00 for the new one.I got a used one and that was bad too. I used the links at the bottom of Crebotechs web site...
I got a topic to speak about. Maybe I just need someone to vent to. Anyway I need a ICS (Idle Control Sensor) for a 95 GSX.I bought a used 1G Throttle body with an ICS for $100. The ICS is bad on it so here I am looking for it again.Let me tell you about my quest:I went to Jacobs...
I have a 95 GSX with Idle Surge. Will find out tomorrow if it is the ICS (Idle Control Sensor). If so I don't want to pay SATAN 265 for the frickin sensor. It has been suggested that I buy a used 1g Throttle body with this sensor and install it on my 2G. Should be like $100 total.Is this...
Help Please.I got a 95 GSX and the other day when I drove home from work I heard kind of a pop sound and the car died. I restarted it and all was well.Today I came home for lunch and when I hopped back in the car it wouldn't start. Tried but the battery was dead.I looked through...
I started down that path for my 95 GSX.I have purchased:
Dejon Tool UIC S Pipe
Dejon Tool UICP w/ 1G BOV Flange
Greddy LICP
1G BOV
K & N Conical Air FilterI feel I still need to get:
Manual Boost Controller
2 1/4 " Intake Elbow PipeI am planning on installing all of this as...
Okay its time for some help. Calling all the Mitsu Gurus.I got a 95 GSX with minor mods. The most extensive mods at this time is a K&N Conical Air Filter, Magnacore 8.5 Plug Wires and a removed Boost Restrictor.Four months ago a friend of mine said Hey your Throttle cable is loose...
Okay, here is a stupid question. Just want to see what the rest of you are doing for standard maint on your cars.I have a 95 GSX with no high level mods.How often do you change the oil?How often do you change Spark Plugs?How often do you change the spark plug wires.Nothing...
Got a Rev Indiglow Oil Pressure Gauge (Electrical) and tried to install it. I have a 95 GSX and got the gauge installed but can't figure it out.Where is the stock Oil Pressure Sending unit?
I thought it was on the front of the housing that has the oil filter attached to it. That is where...
I have a 95 gsx and it is running fine 106,000 miles. I got in it after eating dinner. Started it and the check engine light stayed on. Came back home read on vfaq and another site how to read the codes. I tried the on off on off on, wait five seconds and the CEL will flash. Nothing flashed...
I got my clutch replaced and they had to take the transfer case off. Found it had less than a ounce of oil in it. Mitsu states it needs 8 oz. Got that filled and the new clutch in. Was putting my 97 front end on last night and noticed a puddle under the car. I couldn't tell where the leak...
Hey,I got a stock 95 GSX and am having a weird thing happen. The best way I can describe it would be to say that the car is losing traction. I am sure you all know what it is like to drive on a slick surface. Mostly the northerners. When I get on my car the RPMS will jump up about...
I just got the word that one of my stock rims was bent beyond repair. I am saving money for a new set of Tenso R Shu-4's so don't want to buy a new oem 95 gsx rim. Anyone out ther have one for sale or a set for sale. Please help.PS Stay far away from curbs and parking stops. They can...