95blackGsTurbo submitted a new DSM Profile :98 TSiRead more about this vehicle here...

95blackGsTurbo submitted a new DSM Profile :91 Talon TSiRead more about this vehicle here...

Hey guys! Just a heads up that this spring/summer my wife and I will be relocating to the cities. Look forward to meeting you guys and helping you out.

I am selling my 1998 Eagle Talon TSi due to the fact that I have another vehicle and I just don't drive it or use it that much and I am sure someone else could enjoy it much more than I am now. I am the second owner of the vehicle I bought it from a Navy officer in San Diego in 2006 and it has...

I am selling my 1998 Eagle Talon TSi due to the fact that I have another vehicle and I just don't drive it or use it that much and I am sure someone else could enjoy it much more than I am now. I am the second owner of the vehicle I bought it from a Navy officer in San Diego in 2006 and it has...

Need one for a car at the shop. Must be in good working order. Let me know how much. 623-606-3369 - Adam

Well I am just seeing who is all looking out there right now. Seriously thinking of selling my DSM right now and getting something else. Looking to see who may be interested in my car. Not 100% sure on price yet. I need to finish a few things on it. Depending on if it is a big deal to the...

Well I am getting to that time where I am going to part ways with my car but I need to get a few items before I sell it. Here is a list of things I need to get so if you have anything let me know!Complete 2g P.S. system. Pump, lines, brackets, cooler...everything Rear wiper arm Black upper...

Here is a sneaky peaky of the new BW turbos. Dual internal wastegates, electronic boost controller in the turbo as well as the blow off valve. Hotness. That is a 3582R next to it.

I have a 2g lower timing cover from Mitsubishi still in the box. Never used since I need a 1g 7 bolt for my car. They run about $50 from Mitsubishi so make an offer!

Since I get a TON of PM's on here from locals and don't always have time to answer them all, you can easily get me on the Wingz Performance forum. Wingz Performance • Index page Username is 2Point3TSi. Any questions or problems you have can be asked there and will be answered promptly by...

I am checking interest in my tool box I have. I have massively outgrown it and need a new one. It is in fantastic shape and I will buy new drawer inserts for it for whoever buys it. Checking interest at this point to see if anyone wants it. If so I can go get a new one at anytime. Just need much...

Brand new OEM units. Forgot my motor is from a 1g so they don't fit. Go for about $90 new for the set. Make me an offer. http://www.extremepsi.com/store/customer/product.php?productid=20365&cat=865&page=1 http://www.extremepsi.com/store/customer/product.php?productid=20364&cat=865&page=1

Ok so even Wisemen get stumped. Especially one that works at an A/C specific shop. But this one has us all stumped. I was just driving to make a parts run and the A/C just stopped working. Slowly turned warm. I have tested the switch in the dash, it's good. My A/C relay is getting power and if I...

First off this is more of an informative thread that will show results and the capabilities of E85. I see a lot of guys with questions and concerns about the amount of timing they can run, the AFR's that they run and the difference between E85 and your traditional race gases. I wanted to start...

Here at work we make a lot of these for hot rods and one off jobs. It would essentially be a peice of vacuum molded plastic that would attach to the radiator and help out a TON with radiator temps. I have seen over 10*-15* temp. drops just from using one of these as opposed to just attaching the...

Just as the title says. Need it all. The bracket for the block, pump, resivior, lines, and even the rack if you have a parts car. Let me know. Thanks.

I would just like to thank Brian for nominating me for a Wisemen and thank Tom, Kris, Matt, Eric and Paul for voting me in. I didn't even know this was going on lol. Seems like we have been on here forever. Just thought I would take a chance to let everyone know and thank those who voted for me...

Gotta love posting in the newbie section lol. Anyways I cannot for the life of me fine the connector on my engine harness to plug into the solenoid located on the side of the intake manifold. If anyone could let me know what harness it's in(like what other connectors are in with it) or take a...

I have seen a lot around the area but not really met any. I think we should start a thread with each town name to see who all is around here and where about you live. I'm off 83rd and Thunderbird.

Copied from a local site. Friend of mine. The car is simply amazing. The guy is a fantastic tuner and is a great person if you need advice. Takes a lot of time out of his day to help people with their cars/tunes. Has just about every EVO down here running on E85 lol (Not quite but close).Wingz...

The misses sent this to me today. I may have to try some of this stuff.These are the "greatest" tips, you'll be pleasantly surprised :) > > *Budweiser Beer will condition your hair. > > *Pam cooking spray will dry finger nail polish. > > *Cool whip will condition your hair in 15 min...

Doesn't have to be anything fancy. Just something with the pics of my 1g and 2g together. Go buck wild. Preferably with some lightning or something in the background but not required. Need one quick.

I have more than enough power in my 2g to satisfy my boost needs. Now I am going to be building my daily driver 1g for a nitrous setup. Anyone on here with experience running a big shot of spray? Just want a little feedback not guessing or heresay. Will most likely be running stock turbo on...

AGP with the help of UMS Tuning continues to amaze me. From a local board. AZAWD.org :: Log in

Just got my Fidanza short throw shifter the other day and the install was pretty straight forward and easy to install. Check my Tech article when it gets posted. Feel very confident in this shifter. It is noticably shorter in throw but not so much that I feel that I am going to damage the...

I purchased these about 3 months ago to use as a subsitute until I got my FMIC setup on my car. For the price they are very nice but also reflect their price a little bit. The piping is VERY thin and heatsoaks very quickly just idling in the garage with the hood down. The flange for the B.O.V...

I have a 93 2.3L in my 98 Talon with a 1g head. I have the Cam Sensor wired into the Crank Sensor harness correctly I am pretty sure. Did it just like the picture from RRE says. RRE Instructions Almost everything in the car was new since my last motor failure was a catastrophe. All sensors are...

I am having some major issues with the new setup and have been searching for hours on the subject. First of all, car has spark, fuel and perfect compression since the motor is brand new. 190 across the board. Had a 1g head on a 1g 7 bolt block. I have the 1g CAS wired into the 2g harness...

Picked it up last night from a shop in Prescott, AZ. Very clean car. Needed a few maintenance things but those are already taken care of and it drives like a champ. Of course, it's front wheel drive :D

Here is the video and a few words taken from a local forum. Most people know AGP and if you live anywhere are Phoenix you know Tony from UMSTuning and his AEM capabilities. Car was tuned with AEM FIC Piggyback. Car has a 20g but still on stock injectors. YouTube - AGP EVO X 400+ hpFrom...

Ok I feel like a complete noob but I can't find this plug for the life of me. Where the o2 sensor connects to the harness under the hood. If anyone has a pic of what main harness it comes off of or any detail that would be great. Putting the new motor in and can't find the plug to connect my o2...

Ok so I plasti-gauged all of my main bearings and everything came out great, reinstalled the ARP's set the crank back in, put on the girdle and torqued it down and now the crank won't turn. It is the only thing installed in the block and no matter what I do it won't move. It is even hard to spin...

Ok I am for some reason having a hell of a time installing my rings, I have them all clearanced and I have the top and 2nd rings on but I am kinda stumped when it comes to this oil rail support ring. If I am reading right this goes under all 3 oiling rings? I can't get anything to fit when I do...

First off don't reply unless you are 100% sure or have a picture to back up your answer. When mounting the rod onto the piston, where does the bearing tang go? Does it go towards the intake or exhaust side. I forgot and my machinist needs to know today so he can finish everything up. Thanks.

First off don't reply unless you are 100% sure or have a picture to back up your answer. When mounting the rod onto the piston, where does the bearing tang go? Does it go towards the intake or exhaust side. I forgot and my machinist needs to know today so he can finish everything up. Thanks.

Going to be running these on my new setup and was just wondering if anyone has any feedback on these yet or am I gonna be guinea pigging these things?

Since I live in Iowa and it's impossible to find a nice half modded 1g GSX or Tsi AWD, does anyone know how to go about getting a vehicle shipped here? What company's do it or do I have to contact a special trucking service to do it. Anyone ever done this? How much is it. Thanks.

I wonder if it will fit in my living room?http://www.gametrailers.com/player/usermovies/93704.html?playlist=featured

Props to Ludachris and the crew. Love the new look of the site. Much more appealing. I felt the need to post almost 50 times tonight alone just because I like the site now!

My friend took some pictures of some of the club cars from down here at the new Westgate Mall in Glendale. Wish I could have been there. http://i4.photobucket.com/albums/y112/iowadsmtuner/2x600hp.jpg http://i4.photobucket.com/albums/y112/iowadsmtuner/All4.jpg...

:notgood: Well I went to go to work today and someone had broken into the store and stolen my Snap-On toolbox fully loaded top and bottom box. ONLY thing they took. I was furious beyond belief. But after I talked to my boss he said that the companies insurance will cover the worth of the tools...

A while back I decided to change my brakes and went to NAPA to pick up some new rotors since I got EBC Green pads for the car online. When I worked at NAPA these weren't available to us but must be down here. For less than $60 I got both slotted front rotors. I highly recommend these rotors to...

I am going to be making my new intercooler piping for my intercooler and going with a MAFT setup so no need for recirculating but is anyone on here running thier blow off valve on the hot side of the intercooler. I have been waiting to do this for a while as I have seen HUGE success with some...

I recently started having little glitches with my car and decided since I NEED a car that I would return my car to stock for now and use the money I saved up to enhance her a little in the maintenance area. I feel so much better about driving my car everyday now. Most of the stuff is installed...

Searched forever but no luck and I don't have photoshot. Just repaint it black, maybe do the rims black but keep the chrome lip and take the spoiler off of a pic. Still want a pic with the spoiler on and new paint.