I am fixing my valve tix by taking out the lifters or the auto valve lash adjusters. I have the valves cover off, the engine is at top dead center and I am on 3# cylinder. I got instructions off the net, now with either a tool or a standard screw driver press down on the valve and remove the...

Alright I know the benifits of spraying nitrous into the engine will far out way cooling the intercooler, but what if you are doing some autoxing and want to chill the intercooler just before a race. You can buy paint ball gun co2 tanks from many places pretty cheap, they have a npt fitting on...

Alright I know the benifits of spraying nitrous into the engine will far out way cooling the intercooler, but what if you are doing some autoxing and want to chill the intercooler just before a race. You can buy paint ball gun co2 tanks from many places pretty cheap, they have a npt fitting on...

Alright I know the benifits of spraying nitrous into the engine will far out way cooling the intercooler, but what if you are doing some autoxing and want to chill the intercooler just before a race. You can buy paint ball gun co2 tanks from many places pretty cheap, they have a npt fitting on...

Alright I know the benifits of spraying nitrous into the engine will far out way cooling the intercooler, but what if you are doing some autoxing and want to chill the intercooler just before a race. You can buy paint ball gun co2 tanks from many places pretty cheap, they have a npt fitting on...

Alright I know the benifits of spraying nitrous into the engine will far out way cooling the intercooler, but what if you are doing some autoxing and want to chill the intercooler just before a race. You can buy paint ball gun co2 tanks from many places pretty cheap, they have a npt fitting on...

Alright I know the benifits of spraying nitrous into the engine will far out way cooling the intercooler, but what if you are doing some autoxing and want to chill the intercooler just before a race. You can buy paint ball gun co2 tanks from many places pretty cheap, they have a npt fitting on...

Alright I know the benifits of spraying nitrous into the engine will far out way cooling the intercooler, but what if you are doing some autoxing and want to chill the intercooler just before a race. You can buy paint ball gun co2 tanks from many places pretty cheap, they have a npt fitting on...

Alright I know the benifits of spraying nitrous into the engine will far out way cooling the intercooler, but what if you are doing some autoxing and want to chill the intercooler just before a race. You can buy paint ball gun co2 tanks from many places pretty cheap, they have a npt fitting on...

Alright I know the benifits of spraying nitrous into the engine will far out way cooling the intercooler, but what if you are doing some autoxing and want to chill the intercooler just before a race. You can buy paint ball gun co2 tanks from many places pretty cheap, they have a npt fitting on...

Alright I know the benifits of spraying nitrous into the engine will far out way cooling the intercooler, but what if you are doing some autoxing and want to chill the intercooler just before a race. You can buy paint ball gun co2 tanks from many places pretty cheap, they have a npt fitting on...

Alright I know the benifits of spraying nitrous into the engine will far out way cooling the intercooler, but what if you are doing some autoxing and want to chill the intercooler just before a race. You can buy paint ball gun co2 tanks from many places pretty cheap, they have a npt fitting on...

Alright I know the benifits of spraying nitrous into the engine will far out way cooling the intercooler, but what if you are doing some autoxing and want to chill the intercooler just before a race. You can buy paint ball gun co2 tanks from many places pretty cheap, they have a npt fitting on...

Alright I know the benifits of spraying nitrous into the engine will far out way cooling the intercooler, but what if you are doing some autoxing and want to chill the intercooler just before a race. You can buy paint ball gun co2 tanks from many places pretty cheap, they have a npt fitting on...

Alright I know the benifits of spraying nitrous into the engine will far out way cooling the intercooler, but what if you are doing some autoxing and want to chill the intercooler just before a race. You can buy paint ball gun co2 tanks from many places pretty cheap, they have a npt fitting on...

does the universal filter mount on our cars or do I have to get a fipk.

This morning my car took forever to start, I kept cranking all, then decieded I've probably flooded it, so I went inside for a few minutes. I came back out and tryed it again, it barelly started, really really rough, idle was bad, I gave it some gass, and slowly it smoothed out. it starts fine...

I want to buy a whole new radiator support mine was damaged, how could I do this, does it just bolt on to the frame or rivieted or welded??

here it is

on my 95 talon busted front bumber cover, and a headlight, want to replace with something that looks better, which is an easy fit, also cheap to find, I know the 98 ecplise is made by other companies in ABS so it is cheap to get new.Also what is bumber supports should I remove them...

I slid my car into a ditch, hit rocks, here's whats wronge, front bumper, Radiator support or whatever it is, is bent in one side, sidemount, well have a MKIV supra one ready just clipped the bottom of my left head light.how can I fix the radiator support, can a buy a new one or is it on...

nitrous plus a turbo, good combo right, except when the boost builds and the fuel pressure jumps up and the wet kit jets now rich.My idea I have a aftermarket regulator, on the fuel line to the solenoid mount my stock one or someting cheap that will hold the pressure at 40 psi and keep it...

Alirght I picked up a 6 bolt motor, and I want to build it up, I want around 450 hp. I want to know all the internals I need, and want to spend about 2500 in total.I was thinking je pistons stock 6 bolt rods Arp fasterners, EverythingWhich bearing, rings should I get, or should I...

I was thinking about being ultra, cheap I thinking about mounting the supra sidemount in the frount and route it to the then still use the stock sidemount,I know I know buy a fmic, but I'm mad poor and I think this will hold up to 340 hp well.

I just comp checked my motor, it was cold, and got about 125, 123, 127, 123 bascailly all just around the 125 mark. Is the motor worth adding the bolt ons?

I have a 95 talon tsi, going to be painting it, wanted to know if there is any tasteful front bumper or and conversions that can be done, I don't like it too girly, but maybe a little sleeker.

Wondering what should I do to prep my car before painting, basially just sand down to the primer, and re primiers, try to smooth out any dents. What should I do and what shouldn't I do

I know this is kinda of stupid, but I installed my afc, I don't have a logger or a egt. stock turbo and intercooler, wondering what would be good intial setting to get alitte more power.

it got cold out but I just started pushing the car too, but all of a sudden my motor now pulls like 16-17 inch of vacum when it used to pull a 18-20. Do you think I have a leak somewhere?

well the problem with most manual dsm's is that we can't build boost in neutral or by powerbraking. What if you had an removed assesory like the a/c and replaced it with something with a mini clutch that would put load on the engine?? and that shut off when you launched. How much load would you...

I put my awd talon up on the lift and tried to find out what was the clicking noise. I popped it in 1st and all but the drivers front wheel spun, I gave it gas and it spun and as soon as I got off of it, it stopped spining quickly. What could it be, wrapped rotor??

does the bushur racin upper intercooler pipe go from the tb all the way to the intercooler? casue it's one peice can't tell from the picture?? I know it sounds like a dumb question but I was thinkin about gettting it.

I'm on a budget, looking to upgrade to a big t28 and wondering if it's just worth to get a 1g bov and crush it, are they good, or should I really get a tunable version or is that overrated.

I plan on running a small 35 shot on my car eventually and I am wondering if I need to retard the timming alot or have a window switch could I get away with this??? Because the whole turbo makes more boost would cause the air flow to incease and the timming to be pulled anyway.

would a 190 pump be good enough for a big t28 and a small 30-50 shot of nitrous. I heard that the 190 is good for 390 hp, is this right.

yeah I'm just starting to beat on my car, I have an act 2600 and sometimes in 1st I get on it and after like 4-5 it just feels like its not going anywhere, but second and 3rd pulls pretty hard. is my clutch slipping I have the stock bov and a the t-25.

I am realistically going to make around 330 hp. Can I use a 2.5 madrel bent dp and a 2.5 press bent exahust. i am running a t28 so spool up isn't a huge issue and NO i'm not upgrading later, so could I cause I think this whole 3 inch exhuast is over inflated.

I heard that 95's don't have the problem with the second o2 sensor is this true, I also head the 95's can vent to atmoshere better too (not that I would :) )

I am doing the fuel system now, I have an afc and a denso 190 fuel pump. I will be getting a big t28 or maybe the killer 28 but I was wondering if I should get the 650's to give me more timming, can I still idle with this setup.

I finally got my fuel pump sorted out, the relay at the fuel pump is going to be triggered by a wire 12v coming from an accesory like the gauges, which turn on when ever the key on second click and running. that wire is going to have a hidden switch in it so no one can steal my car. Best thing...

as soon as I activatd the assecesory click and boom, fuse blown, the whole car is dead now, and I can't find the fuel that blew, whats wronge.

OKay I did the fuel pump rewire as per the vfaq on the 2g fwd spider because there was no 2g awd. the fuel pump connector was different, it had about 5 wires, 2 black 1 black/blue and I think 2 or three yellow. The vfaq said blue was power, so I assumed that blue/black was power and then I used...

Are the greddy ic pipes Al? casue the dejon tool is steel, I would think that Al would be better then steel because steel would heat up real quick.