OK I been searching for a answer to my problems with my fuel trims.Over the past 2 days I been trying to change the deadtimes to get correct fuel trims.Here what I'm working withECUFLASHCeddyMods-19cb-maf-bigmapsAFI 1200cc injectorsevoscan 2.7aem wideband o2 (logged)ok my setting...

OK so car was fine and I did a few things then it started not reving up. I had to reace a coil on plug spring and its a little long maybe it needs to be shortened. I also fixed a exhaust leak on o2 housing. I also just ordered a new coolant temp sensor connector since it broke off. Could any of...

Hey just finishing my rebuild and it dawned on me that I never bothered to see if the pinion needed to be changed when converting a 95-96 trans to a 97-99 trans. Last time i found the answer to this it was regarding a evo/rvr transmission.I switched the ring gear but didn't notice a...

Hi, I am in the process of repairing my center diff. The tranny is from a 95-99 GSX. The center diff was welded so I purchased a different center diff. It seems to be too tall.I have 97-99 front diff ring installedSo could I please get some info on the center diff. Years that are...

OK I added a paint drawing of the part I have sitting around. I bought my USED tranny from somebody and told them to leave the center diff out. I got a box of parts and I have two things I have no clue where they go. I will need good part location or discriptions cause this is my 1st time in a...

Ok I am taking my center diff out. And the guy helping me is my dads friend who just had to jump in, started taking parts of my 5th gear synchro apart and now I don't know how it goes back together. The shift fork is still on since we are having hard time removing roll pin.So can I get a...

Ok, I was taking out my center diff and I went to remove the roll pin in the 5th/Reverse shift fork and I tried pushing it threw toward the gears and the hole punch broke off inside the roll pin, and now I'm trying to push it from the gear side outward and the pin is not moving at all wtf?So...

Hi, I got a new viscous coupler from TeamRIP for $65 cause I found sliver goo in my tranny fluid. I took the pictures of the two VCU and the darker one is the one out of my transmission. I believe my transmission to be from a RVR and the tranny code is MMZL.Just wanted to make sure its ok to...

Ok as some people might be having problems with there Megan Racing downpipes hitting there transfer case or what not like me I have found a solution. We can keep the downpipe and have a quick fix. Mine is from 2003 and they fixed the problem last year.Problem is I need the thickest downpipe...

So I'm confused about this. I bought my turbo used and don't know how to hook up my wastegate. It has the internal wastegate I'm sure if its the HD wastegate but my hot-side is undivided so I'm guessing yes.So I have a ProfecB 2 and I see there is a way for external wastegate line hook up...

I will make another log within the next day or so. I don't take the GSX out much. But I just finished rebuild her, and ceddy been helping me with ecuflash and tuning.The car feels fine, just up top feels like it could be outputting more above 5500. If someone is good at ecuflash and tuning...

Ok, I wanted to log to card but I see you need write a text file with trigger points and you wanna log. I know its gonna be incorporated into EcuFlash sooner or later but I wanted to use it sometime soon.Does anyone know how to write this file so we can share it? I know we can agree on a...

Hey I just got my car started after my rebuild.I went to check my base fuel pressure and I just got a AFPR installed for this rebuild. I replaced my fuel filter and have SS line to pressure regulator and I am only get 34psi of fuel pressure with hose off, and don't really notice much of change...

Ok so another thread about the same damn things. I looked at about 30 threads about no spark no start. So here I am.I know somethings to check and here's what I have done. Car ran fine before rebuild of motor.Problems I know to fix tomorrow. -New Battery, mines been sitting around for a...

I'm trying to start my car up now after my rebuild. And I'm not getting anything out of the starter. Other then my signal wire might need a new end put on. I found one wire I don't have hooked up and can't figure where it goes.I think this one is it...

Hey I got these injectors from another dsm'er and I think they been modified to fit another car.Can you take a look at the photos. When I put them in the fuel rail and put the connectors on they don't sit correctly the fuel rail comes down too far. I'm using a 2g fuel rail.As I can see...

HeyI am almost done with my engine rebuild and been replacing a few bolts.I got COP setup and I wanna get SS and I need to know the size and pitch of the bolts for the spark plug cover and the fuel rail ends where the fuel line connects and the FPR.I dont need length I'll pick that when I...

Hi, I have the scat H-Beam rods, I'm about to install them now I just need to know which direction I install the rods?The rods have a serial number on them, both side look the same.I have wiseco pistons and the (DOT) on the top of the piston goes towards the TIMING side right?:aha:

Hey my 1st Engine Build. I have a 6bolt block in a 2g.I melted a piston due to a injector short. I'm looking to do a stock build with a few bolt-ons.Block and head are on there way to being at machine shop getting cleaned and cylinder honed due to damage. Is there anything I need to tell him...

Hey, i dropped my cars head off at the shop to have them tell me what was wrong with it.They fixed my head by accident so they just gave me another head back with bent valves. Now the head I got didn't look like my 91 1g head.This head has smaller intake ports, and a black plug over the...

Hey, I took my head to a show to have it checked out. They fixed my head instead and now I got a used head back in exhange.Now I'm not sure if they gave me the correct head with maybe a worse cam set up.I had a 6bolt out of 91 5speed.Now I got a head with a plug in the CAS part and...

I have a cheap rebuild I have to do. I guess what happend is I had leaking rings then on top of that, Cyl.1 injector wires became exposed and shorted out and ran Cyl.1 lean. Then the headgasket blew out between 1 and 2.The walls of Cyl.1 are scored alittle. Pictures below.I got a rebuild...

Ok, was out like nice, car ran like a dream after fixings a boost leak.We driving around, HI boost and Low Boost. Well after high boosting 1 time, I notice oil pooring out the rear end.I pull over into a gas station to find my dipstick popped out and a oilly mess all over the place...

Ok,Started having some electrical problems with my car. I started to notice my voltage on my SAFC-2 was jumping up and down from 13.* to something 11.2* so I started looking for problems cause I remember 13-14. So I found the wire to be alittle toasted at the alternator so I stripped the wire...

Ok, been looking and looking for my oil leak. And still without going thru replacing or fixing everything I have in mind I still have yet to find an answer... I just got a SAFC-II after trading back my AFC NEO. So 1st time runing good HP out of the enigne in about 10months.So I ask a...

SO I'm not too sure of the difference with Studderbox or Anti-lag but I came across the 2-step box from MSD at a local shop and noticed its size.To me it looks like a simple device and uses ohms resistors for RPM selection. I figured a dial for a radio from radioshack would work. But what...

Hey, I just started having a problem with my car. I got my car robbed of all my goodies while back and I rewired my TT wrong, mostly I guess since the wires look so close to the GREDDY and HKS pattern I guess I crossed a connection or too in my dash. Car starts works fine, doesn't turbo time. I...

Hey, got greedy and bought 87 Octance cause I was cheaper...Well I'm guessing that since I put 87 octane *probley watered down* when I was on the empty light. So I'm driving and the car starts to act like BOOST Leaks. So as I drive the 40 miles round trip I had to go somewhere. I come home...

OK, So I am one of the lucky persons to have bought a AFC NEO which now doesn't work on DSMs. So I remove the AFC Neo reconnect my airflow wire and remove my 550's and leave the walbro 255 in.Now I have a 6bolt swap and a super FMIC with a EvoIIIBig16G fully ported with 3" full turbo back...

Go to REFLASH INFOHey guys,My car got a 6bolt swap not to long ago, needless to say I have driven it 2000miles plus 1200 miles to FL when I moved and have't driven the car since other then keep the battery charged drive around the block. Now 1st off its harder for me to tune my AFC...

Ok I have a weird tranny in my car, I don't know what car its out of W5M33-2-MMZL and I have a 91 6bolt.Now I used this tranny in my car, I took off the tranny to do a TOB and was bolting it up to find the REAR BELL HOUSING TRANNY MOUNTING BOLT can't go in because I have a thread part on the...

Hello, I got this tranny installed after mine took a dump on me. The tranny shop got this one from Cali and had to change the shifter input shafts and removed the counter weight.My question now is what car is this tranny from. I have found 2 answers EVOIII or RVR (mini van).Now the tranny...

Hey, I decided to make this thread to post my last experience with the ACT TOB vs. OEM TOB along with photos as to WHY NOT to use the ACT TOB over the OEM TOB.Has your car started to make a TOB noise after a new clutch job with a aftermarket TOB?? I think I have realized now after replacing...

Ok... 1st to state I have researched and researched and checked and checked about this.My car decided while I came to a stop, to stop going into gear. So I did the normal checks. - Replace Slave (was damaged inside, and leaking) - Bleeding of Clutch Line (I have SS used DOT4 Fluid) -...

Hey guys, I had tried asking the question before. I need to get my boost leak down to none but I can't seem to seal my TB elbow to the intake manifold cause I can't get the 4th bolt to get tight cause you can't get a wrench in there.I was suggested to put a Allen head bolt in there but I...

:dsm: - Hey guys - :dsm:I have been having a hard time with this 1g in my 98GSX. I can't get the base timing set with the timing light I used. It wouldn't show the timing mark anywhere near the marks on the t-belt case.And the strobe would skip out now and then could this be a bad coil...

Ok. I found the attached photo on someone elses post. No one answered his question other then yea, that fine if you have no balance shafts.I DO have balance shafts.Ok.. I broke down in SC on my way to FL from NJ..I needed a new waterpump and I had a guy do it. The test drive didn't...

Hey guys.My friend picked up 97 GSX yesterday. He had put the IPT Race A/T tranny in along with the high-stall torque converter Big16G and 6Bolt rebuild. Now I hooked-up my pocket-logger to see a list of trouble codes.No BCS (Ok, shop lost it) No 02 Bank 1 (Shop installed 1g 02...

Hey. I was out driving yesterday and I did a 180 on a public highway. I spun out in the rain at about 65mph or soo. I missed all cars luckly and ended up sliding into a snow bank and off the road over the crub and stopped. I was in the middle lane doing 65 and a car cut into my lane. I made a...

Ok... I'll make this quick... I have no FPR and my TPS is setting off the CEL.THe car willl boost way to soon, and it will jerk... New plugs and everything... Small hole in SMIC. For some reason I have tons of black on my bumper by the exhuast and my boost jumps around like crazy.. I have an...

Here is the 3rd Gear Pull in numbers.... Ummm... will get the SAFC-2 Setting tomorrow morning and shit. I figured out tonight where to get the numbers... So here it is with a .GIF graph of the same section.PICTURE GRAPH (click HERE)3Rd Gear Pull (16-18psi) :dsm:RPM -Timing-...

Ok, I just figured out how to upload the graphs from PocketLogger so here they car. I know there not pulls. But give you an idea of whats going on. Will do some pulls tuesday morning to get the problems worked out. I dont have too much knowleage when it comes to reading these and understanding...

Ok, I just figured out how to upload the graphs from PocketLogger so here they car. I know there not pulls. But give you an idea of whats going on. Will do some pulls tuesday morning to get the problems worked out. I dont have too much knowleage when it comes to reading these and understanding...

Ok.... So i have the car set at 2 settings. Low 16psi and High 21psi ... So the profecb2 handles that. The setup up is FP EvoIIIBig16g FullPorted, EvoIII02, 550's, 255, Safc2, Greddy Type S, free mods, New TPS, New 1st 02, SS ClutchLine, ACT2600, Full 3" TurboBack, WideBand02, PocketLogger...

Hey. I was just wondering. On my 1998GSX I have a RELAY on the same bracket as the BCS. And its not there anymore, the guts fell out of it. And I'm wondering What the Hell it is? Cause I'm worried cause might be some type of problem for me.

Hey. The shop where I had my clutch done has no IDEA how come my pedal pressure changes sooo much wit my NEW ACT2600.... and there is a new master and slave cycl. Thanks for the help guys.Kendel

0.000 O2 Voltage While DRIVING (need HELP)--------------------------------------------------------------------------------My SAFC-2 Reads Voltage of 0.000 while driving at normal speed, no boost. So, the car likes to buck/lurch/shake it makes it unconfrotable to drive baiscally. I got a...

My SAFC-2 Reads Voltage of 0.000 while driving at normal speed, no boost. So, the car likes to buck/lurch/shake it makes it unconfrotable to drive baiscally. I got a Misfire on cyc. 4 and also a TSP Malfunction ... ANY IDEA'S? How about the fact that I have no Cat and the downstream 02 might be...