I recently did the eclipse conversion on my 95 Talon and I dont have brake lights. I found out that I need to wire them differently so the blinker runs just the middle bulb in each light, and the brake light is run off the centermost bulb in each light... but is there any way to wire them up...

I recently did the eclipse conversion on my 95 Talon and I dont have brake lights. I found out that I need to wire them differently so the blinker runs just the middle bulb in each light, and the brake light is run off the centermost bulb in each light... but is there any way to wire them up...

Alright guys.Fist of all, before you reply Im going to set up a few rules: 1) NO "well my car did this against this car" 2) NO in theory.... 3) NO bashing on the car you DONT haveI know all about the drivetrain loss of the awd, and basicially I want to know how much of a difference...

I finished assembling my engine this weekend, got the engine back in the car, everythings bolted up and I was looking through a box that had my thermostat housing gaskets in it and found the metal ring that is supposed to go on the inside of the main seal. When I installed the seal, I used RTV...

I ran into a problem installing a 16g on my 6 bolt block, with a 2g head, water pipe, and thermostat housing. The drain still hooks up to the water pipe ok, but I need to find another feed line because I dont have the feed from the block. Now I see why I should have used a 1g water pipe. Do...

Hey guys.. I just did the timing belt on my new engine, but I just wanted to be sure I have the marks lined up correctly. Im almost positive I do, but I dont want to have to do everying over again once the engines back in the car. Does it look ok?

Hey guys... I need to pick up some stainless turbo and exhaust studs sometime soon. I was lookin around online and I figured it would cost me over $100 for the exhaust, turbo, and flywheel bolts.. which I think its a little outragous.I know I can pick up the turbo studs and probably the...

I'm going to be doing my headliner over in black sometime this weekend- I did my last eclipse's headliner with felt, but I think it looks cheap now. I was thinking maybe vinyl, but I dont know how easy that would be to work with... and if it would be too "shiny" for the roof. Just wondering...

Hey guys..I've been going back and forth about what color to paint my 2g, and I have to make a decision by next week. I had originally wanted to paint if the grey color of the MR Evo, but I didn't like how it looked in the light- it wasn't dark enough for me.So, I've narrowed it down to...

I've been ripped off on line, just like most of you probably have... but a unique opportunity presented itself this weekend, and I am curious how you guys would handle it.I've been ripped off maybe 3 or 4 times in 2 years of buying car parts on line, and usually the person just dissapears...

Hey guys-I know I need to find myself a new timing belt tensioner arm, and Ill get the tensioner pulley and the idle pulley when I get my timing belt kit, but I've noticed I'm missing a few more parts, and I'd love to just grab them off the 7 bolt sitting in the garage.Anyways, I'm...

Hey guys... its time for me to order my turbo, and I was planning on getting the RS60-T, but I'm starting to wonder if thats too much for my goals. Originally, my big plans were to break 500hp, but now I see its going to take a lot of work and a hell of a lot more money than I want to spend...

Hey guys-Im currently rebuilding a 6 bolt to put into my 2g, and I need to order a oil pump gasket... problem is my local dealership wont sell me anything unless I can get a VIN for them, so heres where the favor comes in.I need to borrow a VIN from someone whos got a 1ga, or whos car...

I've gotten everything I need to rebuilt a 6 bolt, all I need now is bearings.I was pretty set on getting some Clevites, but I've seen some bad stuff on here about them not having strict factory tolerances. What bearings would you use if you were rebuilding your engine?The engine has...

This was done for a Eclipse Conversion, but could also be done to just replace the spoiler or to replace the LED Brake Light.First, remove the rear wiper arm. This is done by prying up the peice overing the "corner" of the arm. It hinges right up, if you have to put alot of force into it...

Im painting my car either this week or next... and need some more ideas of what color to paint it.I really want a dark grey color, something like the IS300 but darker. I was pretty set on the Evo MR color, but I'm not sure anymore.Anyone know what color grey the 2g I posted is? And...

I noticed the other day that my GS wont turn on a fan to help cool it at idle. If I turn the heat or A/C on, both fans will kick on, but they turn off as soon as I turn the blower off.Is there different sensors for the temp gauge and fans? Or should I get into the habit of leaving the...

Hey guys...I bought a car with a bad tranny back on the 7th. I had everything worked out with the guy, he took it to a tranny shop in Louisville, who I had already talked to. I wanted to have the tranny dropped and taken out, shipped to Shep, then have then put it back in when he sent it...

Hey guys-I dropped my stuff off at the machine shop the other day, and they told me my block was bored out to much... there was 6.5 thousandths between the piston and the wall. So I called up Ross to check with them, and they guy I spoke to said 6.5 was to large, it would work, but it would...

Hey guys-Ive decided to try and paint my car myself. Yeah, its probably pretty foolish, but its something I want to try, and Im pretty sure I can pull it off.I will be doing all the primering myself, and I'd like to paint it the evo Titanium Pearl color.I've got a few questions...

I picked up a block today, and have completely torn it apart to go to the Machine shop Monday.How do I seperate the Rod from the Piston? Its all stock stuff from a 6 bolt.Thanks in advance. -Nick

Anyone have pics of a 2g painted in the titanium pearl color? Im contiplating painting my car this color, and I'd just like to see what it looks like.If for whatever reason I dont paint this color, anyone have any suggustions on other colors? I dont want anything flashy or overthe top (no...

Ive got unlimited carfax's until 3/26/05, and am more than willing to help out other tuners. Instead of sending you links like other people have been doing, Im doing to attach the actaul webpage to an email (.htm) so you dont need to go to carfax's site directly.When you get the email, just...

Im thinking about shelling out the $35 to join, but Im afraid Ill do it and It wont have anything Im looking for.Anyone a member of this site? or know someone who is, and can let me know if Its worth signing up for or not?FindCheapCars.net

Saw this on Yahoo a few mintues ago... Can't wait until I see one of these roll up to me at a light.Bad Boy Heavy Muscle TruckQuote: For $750,000, buyers can get the fully loaded "NBC" version that can, Ayres said, detect and block out fallout from nuclear, biological and chemical...

Im going to be swapping a 6 bolt bottom end into a 2g, and I had hoped to keep the 2g head and use HKS 272's instead of doing a full 1g swap. Im going to be running a rs60 @ 23psi on pump.Will this work ok? Or should I start looking for a 1g head?

Hey guys-A local shop around here is selling some coated ACL bearings, that I would have paid no attention to if I hadnt just read a thread about Calico coatings.Well, I asked the guy what kind of coating was on them and he said he didnt know.... so my question is this:Is Calico a...

Quick question guys-Im moving to New York this weekend, renting my parents house while I go to school. Im going to have my lisense and insurance changed for NY, since its going to be a hell of a lot cheaper than Mass.What am I going to need to bring with me to prove I live there now...

Anyone have any sig requests?Heres a few Ive done:

Ive already got a complete head, so I need to be sure Ive got everything I need for the bottom end and accessories.6 Bolt Block 6 Bolt Crank Eagle Rods Ross 8.5:1 Pistons w/ Rings ACL Main and Rod Bearings 6 Bolt Oil panSlowboys Balanse Shaft Eliminator Kit Front platce/Oil Pump...

My GS tonight started acting weird. I was getting onto a highway, going maybe 30 at the time and the tranny either disengaged or downshifted, and it rev'd up. At the same time, my radio reset and it felt like my power steering went, but I dont know. It only did it that one time on my way to...

Hey guys, theres an auction on ebay for a 97 GSXThis guys auction is a scam, but thats besides the point. Im just wondering if he sold the pics from here, becasue I've seen them around somewhere before.

I know theres alot of people getting screwed on the trader as of late, so I've been thinking about trying to start some soft of service, where both the buyer and seller send their items to a neutral party, and when that person receives both items, they are then sent to their intended recipients...

Magnus' site says to use a 91-92 CAS (optical effect) or a 93-94 (hall effect) for a 6 bolt swap, but keeping the 2g head.Can I use a CAS from a 90? Also, whats an "optical" or "hall" effect?

Lookin for a good remote starter for my mom for x-mas. 2 questions- is there any brands that are better? I know some have good reps, but is there really any differece today? and how hard would an install be on a 2002 Camry? Im thinking I can probably tackle it, but I dont want to mess up...

This past summer I wrote a program that displated random backrounds of 2g DSM's. I had some problems hosting it, and I think I made an error zipping it, so it didnt go over to well (I think only 3 people actually got it).Im going to look over all my code and post it again, and now that...

A few buddies and I were trying to remember some of the worst songs at work the other day... It was pretty funny, and I know we missed some, so what do you guys think the worst songs are? Most we couldnt even remever the names or who sings them, so Ill post some of the lyricsWe came up...

I can boost above 2 psi...And I dont think its leaking because its not running rich (It wont fall on its face like it should)...I taped off the bov thinking that was it, but its not. And I know the turbo is boosting because the BOV blows off alot of air when it opens.Anyone have...

My girlfriend and I's anniversary is coming up pretty soon and I need some sugguestions for some "romantic" music... just really anything that is decent.Ive got a cd now, but its been played out.....Any type of music is ok...Help me!

Heres mine. I think its pretty decent.Anyone else have some nice shots with foliage?Bigger version here perfect for backrounds ;)Its mine now :thumb:

Im tryin to get all the peices together to build a 6 bolt, and I was just looking at my crank. I must have overlooked it the night I got it, but thers flat spots on it? Is it supposed to look like this?There is not coating on the flat spots. It looks like bare metal?

Its gonna be a great series.I hope the sox mop the floor with them.Who do you guys think will take it this year?

Originally I only wanted the Rods.... which were $280. He talked me into getting the Ross pistons with them for $420 for both. Well, heres what I ended up getting:Ross 8.5:1 Pistons, bored .020 Eagle Rods ARP Head and Main Studs 6 Bolt Block already Bored .020 6 Bolt Head 6 Bolt Oil...

Ive been looking for a 2G project car for around a month now. Found a few but had to turn them down because they were to far away. Well I found one in NYC that needed a transfer case and piston rings, not a big deal. This car had a turboneteic t4 turbo, apexi fmic, vis carbon fiber hood...

I tried to change my front brake pads, and both polts that hold the caliper onto the mounting bracked are rusted pretty damn good. I can get a wrench around them, but I end up lifting myself off the ground (pretty much) and the seal wont break. Same thing with my oil pan- the drain plug is...

Just wondering if an External wastegate can be set up to dump internally.Thanks.

I need to rent/buy a harness to tow an AWD.I was going to rent one of those dollies from Uhaul, but I remembered it was AWD.... I would much rather tow the car with all 4 wheels on the ground as apposed to a full trailer, but any suggustions would be good.Anyone know where I can rent...

Alright-Ive got a few quick questions about these chips.Im planning on running a FP Red with 770's (so the chip would for for 770's.)What I plan to do is run daily at around 20psi and then turn it up for racing, but also have the ability to run stock boost for emissions and such...

Im looking for another Eclipse... where can I find one online?Heres the sites I frequent most-DSMTrader DSMTuners Ebay Autotrader TurboForums.netAnyone have any other sites worth looking at?

Just like the title says.Im looking for pics of Talons with the black roofs that have a 2gb Eclipse Conversion done to them, something resembing KrazyKoreans old car.I havent seen any other than his, and I may be selling my GST for a TSI AWD, and this would be something I would be very...