I need help with wiring my boost gauge. I know where I'm hooking up the ground wire, but what about the red and yellow wire where am I hooking up too and what are the color of wires as well. I won't be using the orange wire.

I'm having to replace the previous owners screw ups and have seen that most people use this location for the pressure source for the boost gauge, now upon looking around, there are no vac lines going to the solenoid where my index finger is pointing, also what's the plug that's not plugged into...

So I have a question and see if I can get suggestions on what to look for.I've noticed that when I come to a complete stop and start driving, the car lags and even with me slowly stepping on the gas pedal the car doesn't accelerate fast and feels off like it's taking its time wanting to move...

Hey guys, so I need some help on deciding on fans, so currently I only have the engine fan connected on the driver side as the j pipe I have doesn't allow for the ac fan to be installed. I took the ac fan out ai ce the car doesn't have the ac system. So I do want to get a spal 12in fan but need...

Need some help, I have a 95 gst auto, I can't find any bushings for the front center cross member brace. What are you guys using?

Long story short, sent my gst over to a shop to have the head gasket done. Now after putting it back together, they said the car doesn't start. When the master mechanic sets the timing, the valves are both open, but when he sets the timing for the non turbo the valves are closed a bit. The car...

What I am running into is a potential issue with camshaft sprockets. With the timing marks where they need to be for a turbo engine the valves are both opening at the same time. If i do it for a non turbo engine, the timing marks do not add up. I don't see any internal damage, and the head has...

Ok guys, I've searched the forums and can't find what others with the auto transmission are running in there vehicles. I only see manual questions. I'm looking to put new fluid for the transmission and put the right one in. Thanks for the help.

Ok guys I have a 95 gst what went from needing head gasket job to finding out the person who sand blasted the VC didn't take out the baffle and now long story the bottom end is no good due to the sand left over and it being mixed into the oil along side of the coolant as well haha. Car I got in...

Need some help, drained all coolant due to turbo change, upon starting vehicle I poured a whole container and started the car so the air bubbles can come up, then the coolant started coming out aggressively and had to put cap back on. Why would this be happening especially so soon? I'm use to it...

So of course I can't get my jpipe to fit due to the radiator fan, which fan is this one that was on the passenger side? I've removed this fan and only have the driver side one in as it gives me plenty of clearance. Also my car doesn't have ac either.

Hey guys, looking for pictures of your relocated trans cooler, due to my Intercooler piping not fitting well on my driver side.

Can you guys add some pictures of your intercooler setups and how you have the piping routed on the driver side specifically with no bumper on?

I have a 95 gst and started the process of installing an aftermarket intercooler, I have the passenger routed and had to squeeze around the auto dipstick, now with the driver side, it's a challenge because I don't know how to route the piping here's how it looks when I used a 180 pipe I have, it...

Found these two wires unconnected and was wondering where they go too, this is a 95 gst auto

Hey guys, I have a 95 gst. What's the size in length of the oem cat? From the start of the downpipe to the end of the cat, as in from the flange to flange?

So I bought a new line for my car and the one fitting fit the oil pan perfectly but the other one was way off. Any idea on what turbo I could have?

So when I bought my 95 dsm, the car came with this brand of intake. It has a small tube that goes upwards that is capped off, and it has a small hole at the bottom thay has nothing there. Wouldn't there be a nipple of some sort located on the intake to be able to run a catch can?

Hello, I can't seem to find what cover I need for my transmission. I see 2 different kinds online. Thanks again.

I was starting to work on my 95 gst and noticed this wire hanging and was connected to something some time.