I have a 91 NA Eclipse race car and I'm hitting rev limiter in third gear.
I had Basset Wheels make me 6 wheels 13x8, I changed wheels from 14 to 13.Now I'm hitting the rev limiter so I would like to know if any one can help me figure out what I need to buy to have a ECU hook up to be able to...
About 7500-7800 but its breaking down before that. Sounds like its breaking down like a bad coil or wires or plugs. I purchased a oem coil showed up today. I ordered a set of 8mm wires, ones with ground wires on them and I'm now searching to find a good spark plug to run. I have a low end...
Yes. This last race it started back firing and running rough with no power when standing on it. Not to bad on low in, but that's no good racingPlease do, I'd like to be able to get something like this. I know it old school but I've got a ton invested in this. It's been a top 5 car but i...
i was wondering if any one knows how to hook up laptop to 1st gen computer, i think im having problems with a rev limiter , im not sure ? this is a race car , so just a few wires run to toggle switch but from computer out to motor everything stock everything in dash board...
so today i took the eclipse to race track it start steaming up windshield .the temp went up to 215 so pulled ouff in to pit road it was hot so i pulled over to side and had them push me to my pit i took off radiater cap after coolong a bit ,then i filled it up with water and...
Yes I was the new maf was bad then found our it had mustang injector in it also the idle air sensor on throttle body was defective so running really good mow just got it back from vinyl
ok i just took out computer from race car , on the back of it it says 92 talon ecu automatic ,some one wrote on it, im thinking they may used the bigger fuel injector for this computer could you tell me what would be the right injecter to match this 92 talon ecu , ecm which is #...
i was wondering what is the correct size for the fuel injectors, they are all mixed and matched and i want to get a new set of matching injectors.i think i come to the conclution that my mass air flow sensor that is new is defective not working. i dug out my book and we tested volts which...
good morning
ok yesterday i received new computer for it. The new ECU would not start car at all, so i installed the old one back in and it started right back up. so that failed on me, so im not wiring savey or computer genius on this 1g ist time ive owned it.i tried studing out whats is...
ok today im back
I've checked out the throttle body also the intake for leaks. Everything to this point seems really good. I bought a new tbs sensor and positioned it same as the old, i replaced it with a new one. I've checked the plug coming to tbs checked fine.I replaced idle air sensor...
Good afternoon. So in other words, I should just buy another 1g maf because mine is no good. It was just cheap(?). In the long run, I could of bought all new for around $200 (2G MAF, adapter, the new wire harness that hooks up to the 1G harness and allows me to plug in a 2G MAF and then a...
first of all im pretty new with eclipsei baught this car from back of a guys junk yard it was a previous 4 cylinder race car ive had to replace every nut and bolt 60% of all wiring, built brand new motor, and had the transmission 5 speed locked. everything is new. i tapped the exhaust put...
if i change my 1g maf and put in 2g maf would i have to change my injecter ive been told that i have to have computer worked on to run 550 injectors so i f i go 2g maf can i just stop there not change injectors or how does this work any help id apreciate ty robert 91 eclipse...
I'm looking for a racing computer for my 1991 Eclipse NT. I've contacted a few company that do ECM work, they say they don't have a program to update it. Mine breaking down when step on it.If I unplug the wires square plug on left botom of throttle body it will turn up good when let of it it...
i have the same problem with my car only diffrence is mine race car the previous owner cut all wires nothing to coolant temp so if some one could help me i have a clump of wires that he cut right off completly no conectors so im looking to identify the corect wires for temp sensor only for ecm...
im looking for some help with hooking up a tac on my race car before me the owners cut out alot of the wires from ecu or computer most places ive read on here said to hook to cetain wires on computer plug in when i went to find them theye were cut short spent time stripping what...
I want to put power steering back in my race car. It's a 1991 Eclipse 2.0 NT
When I bought this car I got nothing. They cut the pipes from rack and left it. What I've bought so far is the engine side mount, the bracket that holds the power steering pump to the motor, and a water pump pulley with...
I never run it but he say he could run it in second it has 14 inch tires on it truck area gutted out piped all way to front but if I get home before dark ill get pic in morningDo you have a cell phone I can send you a small video to or I can try to email it
I run 4cylndet modified class under sport 4 here ive raced diffrent car for 15 years speedway 95 bangor me I do my best ive never won a race but im costing I run a 99 civic in that class so I know how to race but they all got hot cars. Fast im the slow one
Third gear so I've never raced this car just baught they blew head gasket in it they messed the whole thing up so whats your recommend to build 2.o from fresh new parts its bored 20 over but when they tighten it up wouldn't turn so im thinking a racing rod kit piston rods rings what would...
its a stock car 4 cylinder class. The car is a 91-92 Ive been told. Its all cut up and i really don't know much but the head is a 91. I will know more when they bring me the rest off the parts that's what the owner said. I just want to know the best way to build a fast engine without going...
I'm new at this. I was told I could buy a 2.4 pt cruiser motor and use a 2.0 eclipse head on that block.I'm building a sport 4 for 1/3 mile race track. They tell me that's what I need to build a stroker.The car is piped from front to back so i think everything could be made to fit but i need...