Yes!!! Thank you!! i was at the junk yard today peeking around and noticed the convertable sebrings but wasnt sure. And now that i picked up my new flexplate im excited to get her back on the road. So just to help confirm this challenge was the Flexplate:hellyeah:. The bolts backed out and when...
Thanks to all your tips again!!! Everyone Your truely what makes this community work in unity!!!. Well this is absolutely causing the freaking knocking and tugging. So just to update. Thank you I made sure to polish before bearings installed and now going to attack the flexplate/flywheel. I am...
The knocking developed slowly a couple months after the rebuilt cylinder head. I tried almost everything fluid wise like engine treatment which seemed to help I used rislone seemed to help then finally I decided to try to fix the issue so I thought let me check the rod bearings and they were all...
Hello dsmtuners! I first want to thank everyone for the fast response in my last challenge. Got me back on the road for a good year! Until recently I had a tensioner bracket break due to a failed plunger style tensioner. So yeah cylinder head valve damages occured. After changing the head seals...
Ok. New update.. Sorry have not updated sooner but i just now installed the new sensor.. Starter relay pluged in. #26419. So far shifts great. No ✔ engine light now i just need to get the fuel to pump steady. And still no reverse lights. Im going to check the bulbs first. Thank you again to...
Update found the short in. The door lock. Well there is a connector and switch the connects to the back of the key lock cylinder. The green wire was broken at the solder point. Wich when the fuse is in it seems as if someone is holding down the lock button therefore wire feeling disconnected was...
Okey dokey! First i want to thank all the support and knowledge shared with me. I have very good news. I tried a jump wire for the skinny black and yellow wire and the red and black wire together and
YAY!!! LIGHTS OFF!!!! . still no relay but um is it safe that i run jump wires on both. Car...
Sunroof and reverse lights atill nothing but the car starts with the key. How should i properly repair this issue?
By the way the DSM community is AWESOME
Question:
When removing starter relay and using a jump wire
Do i also or can i also.. jump the red and black wire and skinny black and yellow wire that go to that sensor which might be the neutral saftty or transaxle position sensor? Should i try it.
Ok everyone new update..
New TCM seems to be shifting all gears. Only got up to 40 and down shifts felt good.
But something still is wrong. CHECK ENGINE light still on right at start with same code which says refer to owners manual C0305.
I noticed while sitting there with my door open my...
I so update time! I found my short in when i pulled my door lock fuse.. Voltage no longer draining battery. So. My reverse lights, sun roof still doesnt work but fuses are good..Where can i find a TCM for My 1995 Eagle Talon ESI auto.
i found 1at oreillys but the listing says doesnt fit my...
Perfect! Thank you!! This does help and yea i noticed the check engine doing the pause light dance but. Upon digging deeper i found a short. The wire is white, not alternator wire but it leads to the fuesable link from the battery. I will post pics in the morning. Im almost Almost there!
So just...
When i swapped my blown motor 420a same thing.. I was like ok her we go......................nothing
All i could say is omg...
My wife being their to witeness the moment stated.. " check to make sure everything is hooked up!"thanks to the professional advice everything looked good up top but...
Now guess what.... Its in limp mode check engine and code C0305??
Thank youAnd it only runs with jump wire with starter relay removed. Could this be bad ground..?
Ok Team! Here we go... Problem semi solved!
Good news is that the car fired right up with new ECM. But not right away. I will list what i did that caused problem and errors i made.-Welded part on coolant pipe with battery connected-
SMH i know... Trust me i kicked myself when i noticed. But it...
So i installed a new( reman) ECU. Now i have all lights back on in dash for engine and everything you can hear turn on fuel pump etc. But right when i turn the key..... nothing.. I dont get it...
Now i do hear a couple of clicks from relays under the hood and in the cab.Found that the starter...
Thank you everyone for there quick replys. And thank you for the info. I did pull the ecu lid off and correct its layered in red goo. I have reason to believe this problem is in the ecu. I will update in the morning.
Sorry im horrible when it comes to proper terms. I have 95 eagle talon esi and i used voltage test and everything checked out good even direct wire test wad good.i took out the ecu but found no info on how to repair it. I am confident about fixing myself if i know the right way to diagnose it...
I have an electrical problem that im stumped on.
Friend welding a patch to the coolant pipe and used battery as ground, battery WAS connected. Now i have No power to engine components. Interior components work fine. I manually tested each component and they work i double checked all fuses and...