Hey guys I just made a relay panel for my car. The main purpose is to supply power to my fuel pump, wideband gauge and fans. I will be running everything to a switch so I will need three relays that will need to have a trigger wire(ign.12v) My question is can I use one wire as a trigger for all...
This was resolved guys. It happened to be my injector set up. A guy local for me that does injector cleaning has a 92 eagle talon that had a similar problen. he took off the bottom hat of the injector and had a custom top hat. That prevented the injector from leaking like it was. That with a...
Ok let me see if I can save a log and put the link here for you. What is a smoke test? Yes sir I just replaced them with BPR7ES spark plugs yesterday.Ok let me see if I can save one so you can view it.Ok I will definitely double check! All gaskets are new but definitely need to varify again...
Sorry to bring up such a old post but I’m having the same exact issue you were having and can’t seem to find the problem. Identical issue to yours. Did you resold this issue 100%? Thank you!
just tried is and still there. It’s more of a popping noise. The video doesn’t bring up the sound that good sorry.It does it cold and warm. Right when it starts to drop RPM I can hear it popping away lol car drives on the highway smooth as heck once you get to a stop it starts popping like...
Hey guys hope all is well. Just got the car running back up after a year. I’ve change a good amount since the last start up but here is a small list of the main things:Walbro 450 (rewired)
2150cc injectors
AFPR
E-85
Speed density
FP-green turbo
EGR delete
FMICI’m having a misfire on idle...
Purchased a FP Green 73HTA Turbo :D Also went with stainless bolts for manifold to the head and the turbo to manifold. Little mock up before I hook up the coolant & turbo lines.
hahah man! They can keep it LOL so happy I’m upgrading hahahI do appreciate that a lot. Trying to clean her up as much as I can without pulling the motor because I currently don’t have the space to do so :| Oh yes for sure man. Definitely want to have bigger issues covered before upgrading...
Haven’t posted in a while but do have some pretty good progress to post :cool: Changing the alternator turned into taking the manifold off and doing some cleaning :DPurchased a FP Manifold from from a local DSMER :cool: The wife was super happy I oven baked the manifold in the house :thumb:
Thank you very much for your reply :hellyeah: I'm going to go with washers on both like you advised.Was honestly not going to run coolant at all but already bought my fittings and such. Next time ill definitely do more research. Thanks for your time and reply!
Thank you for the advice! I went ahead and put a crush washer on both sides because i wasnt sure if the o-rings i have on hand are good for high temps like you said.
I really do appreciate your reply! I didn’t even think about the o-ring getting hot. I’m going with crush washers to the housing but not sure if I want to put the o-ring on the side that connects to the coolant pipe :confused:
ok Nick, thanks man! I called FP on my lunch break and they said as long as it has a crush washer it should be a good fit. I should’ve went with the banjo like you did so I didn’t have to buy a 6an 90 Degree. But oh well lol
Hey what’s up guys. Hope all it well. I just purchased the FP green for my 1990 TSI. I can’t get the OEM coolant return line to fit so I’m going to run a 6AN line from the turbo to the water pipe (the pipe connected to the water pump)Everything I need just came it but what confuses me is that...
Everything went well :cool: Was a PITA to get the tension right on the timing belt, other then that about 2 days of work on and off she’s done. Now still have a tiny oil leak I’m thinking it’s coming from either my oil pan gasket Or somewhere lol :confused: in the process of ordering the gasket...
Doing the Timing belt kit & more over Thanksgiving break :hellyeah: The car is mainly stock besides Evo 3 manifold, ECMlink V3 & Boost controller. Doing maintenance before I start to throw GOFast parts at it. Going to clean up the 30 year old gunk & Changing the following parts:Timing Belt...
Thanks Pauley! I just ordered from STMtuned.comCamshaft seal x2
Oil pump sprocket seal
Front main seal
Balancer shaft seal
Valve cover seal
STM timing belt kit. Went with Blue gates belts and the OEM water pump.
Timing belt pre load tool
Cam gear lock tool
Tensioner tool from Jayracing.com...
ROFLROFLROFLROFLROFLROFLYes, like you said can’t see anything with all that 30yr old oil everywhere ROFL ok will do I will definitely let you know how everything goes when completed. Idk how long stmtuned takes but as soon as everything comes in I’ll be back in the garage. Do you happen to...
It’s crazy because the top motor mount is trash and no balancer belt & she wasn’t vibrating to my knowledge LOL I’m sure she was but didn’t notice since I’m just very excited to have bought the car haha & yes you’re so right I was reading on so many tragic story’s where the balancer belt snapped...
Doing maintenance to my 1g and after taking timing cover off notice the balance belt is broken. I’ve been driving like that for at least 200miles(I just bought the car 2 weeks ago) I’m also going to be changing all the belts, pulleys and water pump since I’m here. Thinking of the front main seal...
Thank you all for welcoming me. All started January 31, 2020 when I seen a 4 door sedan at the 1/8th mile beating every car it lined up with. Shooting flames after every shift. Growing up around v8s my whole life I never took interest in anything else until this night. Went down to see what kind...
Thank you very much! Can’t wait to start doing maintenance and wrenching on herNice set of cars you have there!Thank you! Very nice 2G you have as well Yes sir she has Dejon cold side piping And FMIC. Also ECMlink v3. I’m going to buy a laptop so I can mess with the program but before that I...
I’ve been looking for a year and finally found my 1ga! Had to travel 18hrs round trip but she’s mine and can’t wait to seek more knowledge from everyone. Previous owner suggested this page and wow is it full of information. Thanks for having me.