well just bought a 3.5 inch QTP electric cutout so i can open and close it from in the car, well my buddy has one on his civic with and H22 swap and it gave him some nice power with us it should give a shit load and way faster spool up and still be able to keep a desent quiet exhaust on the car...

evo FMIC what do you think about It on a 2G

ive heard that to get the best performance out of strut tower bars that you have to jack the car up off the ground and put them on so there is no pressure on the suspension. what do ya'll think is that good or bad how do you put them on? has anyone ever herad of this before???

does or has anyone done a magnus dyno vs stock intake mani ported and polised like the one that road race sells?? just the stock mani is sleeper style if it will give about the same power an is not as much of a PITA to install

ya i was wondering if it's good or bad to run no thermostat i know it will run cold witch is good but is there a thing as too clod i also have a blitz 1.3 radiator cap

ok well i have a greddy evo had it for like 4 or so years and its good but my setup is pretty much race and i think that the greddy system is holding me back a little, and i want a new one. so im looking at a few and not sure what to get, i really like the TANABE ULTRA MEDALION, but i did a...

now this may be another stupid question on my part but ive been in the game for a few years and never found the answer. my question is how do some of you guys have matching HP and tq?? with 2.0 motors. ive never had anything close. right now im running fp3065 and i have 376hp and 291 tq...

just wondering if all you guys are using bpr8's. and how long they last in your car??

well at first i thought that this was gonna be a great manifold, but it turned out to be very disappointing. i bought the manifold and not even 7000 miles on the new CAST manifold it cracks all the way around it. and no i don't have a race car putting like tons of heat and stress on it just a...

i need some pics of wear you guys have mounted yours? i have a 2g ad im looking for a stealth location to put mine so i can go to the track. batts in the truk because of the magnus thanks a lot

ok well i dynod at 302 with 246 tq. well the problem is that i have eveything dont to the car. SBR stage 5 head, 880cc injectors, built 6 bolt, magnus intake, 60-1 turbo, hks cams 272's. dsmlink ect i have everything els listing in my profile. well i have a gm maff and someone told me that it...

well i bought the dis 2 high output part number 62113. and i was wondering what anyone has thought of msd? negative or positive and maybe where they put theres in the car. whats the input on gains. thanks a lot for any help or pictures or anything merry XMASS!!!

well i have a 60-1 and im running about 24 psi tuned on pump. i have a 3.5 inch electric cutout before the cat and when i open it it seems that the tial 38 cant hold the boost has this ever happened to anyone eles with this type of turbo?? because i want to get a FP 3065 and i know you need a...

does anyone have dynos on either turbo, im looking for pump gas numbers. i would like to know the diff in spool from the 3065 vs 3052. im going to get one of them but want to make the right decition for what im looking to do. spool is pretty important to me. but if the 3065 will give say 40...

well just wondering how acurate defi gauges are. well the reason is i have some electronic gauges and well the boost gauges reads more boost then what im running and the egt i have a feeling reads a lot more then what im running so i wanted to know if anyone has ever like tested them. Like go...

well i have a 6bolt with no balence shafts,right. i have an aftermarket greddy 60mm electronic gauge. the sending unit is right in my oil filter housing. well at idle im at about 30 psi pluis or minus 5 psi. but when im on it i gets as high as 120 psi or mabye even a little more. i have an...

are any of you guys running a GM maff and when it rains does your car act funny or any problems??? just let me know your expereinces

looking for some new wheels, lighweight but also afordable. I'm thinking of rays g racing rim but not sure the weight, also looking for 17 size thanks in advance and if u can post pics of the rims u recomend

i need the size and the tread od the mounting bolts on a tail 38 for where the duptume flange is my 2 bolt fell out and i need too more asap does anyone knoe the size and thread thank a lot in advance

NEW pics of my setup fully built 6 bolt, SBR stage 5 head with ferea springs and ret, the TRE fully bulit AWD tranny converted to FWD and a 60-1 turbo, i know my color scheme is screwwed up but i had an old motor with som red crap so i have to buy new stuff to get rid of the red so i already...

ok well i'm looking at clutchs, i have a ACT 2600 with an unsprung 6 puck. i really dont want this combo, i think i need the 6 puck becasue of the power i will be making but i dont want unsprung. the cars not a DD but will get driven quite a bit in the summer. I want to be comfy driveing it...

can anyone invite me to NABR forums please, just check my profile i think that my car and my knowledge is worthy

ok i know it is harsh engagemnet but how bad is bad what is the in between shifts like?? it's not a DD. just trying to get opinoins on people that have it. the reason i went with it is becasue i dont feel like chaging clutches every year. thanks guys

who has a quaife lsd and is fwd?? i have a built tre tranny w a quaife lsd just not installed yet and just wondering how some of your fwd guys like it give the low down wi how traction is, my car should be making around 400+ on pump hopefully when it comes out and just trying to see what kind...

does anyone on here have this exhaust?? it says it's full 3 inck and if it's titianum then it's gotta be the lightest exhaust out there for our cars. but what does it sound like look like on a 2g

i have unorthodox puleys on my 2 g but i'm about to put a 6 bolt in my car are the water pump pulley the same so i can transfer it form my 7 bolt to the 6 bolt?

ok well i wanna know the low down on this turbo from people that have it not people that here about it whats the spool time on it wioth a full 3inch exhaust no cat and 272's and a fully ported head stock size valves for 20psi. what about the diff in hp and the diff in spool vs the 8cm housing...

well i'm fully building my motor and i'm looking for the right turbo for good street use but also able to make a lot of power if i want to boost it up with some race gas. I have the SBR stage V head and i'm buying a TRE tranny and fully building my block, should be able to handle 800+WHP so my...

well looking at doing the 2.4 stroker kit, well just wanted some advise from anyone that has it about how they like it, don't like hows the longevity, exhaust tone, power, street driveability. any input negative or positive also I'm FWD if that matters to any of you thanks a lot

ok fellas well time to replace the motor again. not real sure what happend but the motors gone, and it overheated like a bastard so not sure right now how the head is. Well what are some ideas for fixing the problem. DO you think i should do a built longblock form SBR or just like a stroker...

i run 19 to 20 psi high boost and was wanting to upgrade to a new turbo and the fp green seems like a lot of people recomend it but what is the spool time like will i hit 20 psi by 4000 or quicker??

ok i have a bbk 62 mm throttle body and today i was not getting anything more then 7 psi. i run 19 on high so i thought it was my stepper motor on the profec but in case i just did a leak test and found a leak on my bov and my tps sensor i took a pic of a hole onthe bbk so you guys tell me what...

i have a question at idle i'm having voltage drops that i never used to have like it goes down to like 13.5 volts maybe lower at times. and when i use a blinker it will make my dash lights dim too. now my question is does this mean the alt. is about to go soon?? also i just relocated my bat...

ya i cant figure out the trick to making a 6an oil line i cant get all the stainless steel mesh inside the fitting and when i cut it even when i tape it it get all frizzy is there anyone that can show me how to make ss lines thanks

hey i want to see some install pics of people with the magnus intake mani on a 2g trying to get some ideas for my install thanks

well i'm looking at doing and iol cooler for my 7 bolt and dont knoe if i really want to change the housing becasue thats a real pain in the but, so greddy make a kit that works with the 7 bolt but i was wondering how it works so does anyone have it?? i know you can put a new oil filter housing...

ok just got a magnus and i'm pretty pumped. well just wondring if anyone has a how too with pics or any info will be helpfull. Thanks a lot !!!!

hey just got done install the bear kit very simple bolt on kit very pleased so whacha think??? also my rims are 18s if you were wondering

well just put my water temp guage in, and i was just wondering what evryone eles is running for temps?? I also have a fluidyne rad, and fal fans and i'm running about 210-220 is that normal??

hey i just got them but havent installed yet looking for some input from anyone with a 2g gst thats has them. give me the good and bad and the ungly on them i know they are stiff but whats it really like at idle??

just put my hids in 8000k into 97-99 headlights my cars a 96. well here are some pics

ok i have hks 272/272 and i keep getting a ramdon misfire and i dont know why?? I thought it was my ciols so i upgraded to the slowboy ciol on plug setup but still get misfire and i also have ngk bpr7s and gaped them right not even 1000 miles on the plugs. i wasnt sure if it was the cams that...

ok well it's time for a new turbo and i want a 50 trim or better but i'm looking for quick spool like 4000 rpm at 20psi, also i'm on stock internals for now soon to be changing but i'm dealing with it for now. i just want some opnions on some 50 trims or better that can get me to the 500whp...

where are some places to tap into the easyest please thanks

ok i have a apexi dp witha a high flow cat welded into it. I also have a 16g ported/polished and wastegate is ported and the passage way between the wastegate and exhaust turbine is cut out a little bit . i want to get rid of my cat and get a REAL 3 inch Dp but i was wondering if the DP will...

if you have a 2g head and put on a 1st gen intake manifold and throttle body will this work. I know you have to modify it somehow but how do you do it?? thanks a lot for any info.

just put my hood and bumper on i do have 97 headlights and hids to go in them i just put it on for right now till i do the whole front end