Garrett 100% unless you want to go cheaper and laggier go with something cheaper. My gtx4088r made just over 500whp at 16psi on pump....that was on a 2jzgte though. It created full boost right at 4K though spools insane fast. I’d suggest a gt35 series for the 4g63. The gt40 is a 1k hp capable...
Like title says, and I’m new so hope this is in correct area. I don’t want to put anymore money into this car as I’m trying to get it back together and sell. I have a 96 tsi awd (Gsx) with a built 99 motor I pulled from a GST. I didn’t realize at time or I would have just pulled the ecu from the...
Ok I’m very confused and I’m sorry but want this swap to go smooth. Engine still out but want to install. I got to location where the CAS should be for a 96 motor on the 99 head. I see screw holes and were I believe it goes but there is no hole into head just aluminum about 1/2” in. Is this...
Ok so I have a 96 talon and have taillights from 99 eclipse I’ve done full conversion but can’t remember what wire from talon is for the reverse lights. Any help. I have wires fed from eclipse back up into rear but need a reverse power source. Any help thank you. I don’t have anything Talon...
Shoot ok looks like I’ll havwshoot ok looks like I’ll have to source a 95/96 cam sensor. Sorry again but mentions in different locations? Does that mean I have to tap in different location for cam sensor or just change sensor itself out?
Well shoot that ecu is gone. It also was for a GST not a Gsx does that matter?So if I use an older ecu what do I need to rewire? Or rearrange and why? Sorry new to dsm but not new to modifyingAlso have Apexi tuning devices I was going to use for fuel and boost so which ecu is easiest to...
Honesty just putting car back together so I can sell it. Buyer I had backed out last minute so I said screw it I’ll build car and then sell. Motor is 99 with 20g turbo, tial wastewater and dsm lightweight pullies. Ran well when pulled from 99gst. Now putting in my 96 awd
Would it be worth sources components off an early engine or just do some rewriting?Ok so does starter relay need to be reworked to use 99 motor?
What is FP check connector?
What ecu should I run?
Is the Fuel tank diff sensor needed for 99 motor to run correctly?
Thank you guys for all the info. Reading through what’s different does it all need to be changed or is that just reference to what’s different? Like the abs stuff etc.
Ok as title says I have a motor out of a 99gst I’m wanting to install in my 96 talon tsi. Is there anything different between those years? I know ecu in car is a 96 and only thing I can think of being different is the cam sensor on back of cam looked different in those 2 yrs. what do I need to...
This is a part out( Or sell entire project)but shell must sell first or bundle and save see prices below. Rare slick top(no sun roof saves weight) This car is currently just a roller but have about 99% of everything needed to make it run. Needs a front axles.Clean title 1996 Eagle Talon tsi...
I’ll sell roller with extras on it for $1200 clean title, clean interior slick top. Once roller sells I’ll sell out everything else. Or 4K for all thousands investing great build platform. Can deliver within Washington Stage for small fee
I’ll let her go for 4K I’m surprised no one is interested in this rare slick top with so many high end parts. I even have 2 rear sub frames with rearends. One in car and one out.
As title says time has come for me to end my dream build. I have a clean title, clean interior, clean body 1996 tsi awd only 111k or less on car and everything else. I’ve properly converted to a 99 spec gsx eclipse, bumpers, lights, fogs, side skirts, hatch/high wing. Thousands invested over the...
The CAS I have looks like a triangle where on the 95 motor I sold it was round. Unless I’m looking at something wrong. I also haven’t chosen an ecu yet but if I run an older one (for tunibiluty) can i still use the 99 2gb one. I read somewhere it’s possible but have to rewrite it because of some...
Entire wiring harness is there including the engine one but I do know that the earlier 9596 have a different CAS and read something about firing order?
Interesting read so I jumped on Fleebay and found same fittings -06an 2 for $9.95 just saying. I’m pretty sure all these fittings are made in the same factory and range from cents to dollars depending who you buy from.
Going to start off by saying I’m not new to engine swap and or built cars but brand new to dsms. I have a beautiful 96 gsx roller I picked up to build, that being said I sourced a low mileage running motor out of a 99 gst. I have a few ecu to choose from(if needed) and my question is what do I...
Ok so I have a clean title 1999 gst 5spd. Bought car recently mainly for a few parts it had on it I have since swapped oem parts on. Unknown condition of anything but I do know cluster and lighting works. I pulled motor out and one that is included in sale had a timing belt brake and needs head...
Like title says I have quite a few items. 96 tsi fwd turbo transmission worked when pulled from parts car. $450 will include like new clutch, Fidanza flywheel, p/p (FWD) Talon hatch with low spoiler and high wing 97-99 eclipse spoiler $100, very clean Injen intake with couplers and red hoses...