Has anyone experimented with solid lifters yet, i know there are some good gains with them and if set up correctly very little tappet noise. or is there anywhere that you can purchase them as a kit?

Has anyone had any dealings with these guys: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=019&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=290083170628&rd=1,1 I was going to machine out my HX35 comp housing and fit a HX40 comp wheel, is this able to be done.

Has anyone done any extensive mods to one of these heads, anything with porting and flow numbers, do the DOHC valve upgrade fit?, springs and retainers. The port sizing and shapes appear to be similar to the 2G DOHC.

Has anyone seen anything on these:http://www.airpowersystems.com.au/us_spec/evo/ex_manifold/ex_manifold.htm and :http://www.airpowersystems.com.au/us_spec/evo/in_manifold/in_manifold.htm

Has anyone used these and what are they like with port match to a 1G. i can only veiw a small picture on the net, there is no one i know of in Australia that has these, do they have a cracking history. Paul

If anyone has a spare cam not fitted in there engine would they be able to measure the diameter of the cam gear locating pin for me please! (accurately, Micrometer preferable! or good vernier)Thanks.

Has anyone dealt with or used one of the turbos!http://www.mjmturbos.com/New20G.htm. They are called the "ultimate" also come with a stage three turbine wheel??? They say it will support 600 hp but they couldn't show any comp maps. i dont want to find that it will struggle and overheat the...

I have what they call a TD05H 17C how do you tell if it has an 7cm2 or a 8cm2 exhaust housing? is there a p/no or some measurement that is an easy way. i dont know whether mine is just somesort of hybrid put together or it is a full on 17C. going by the compressor wheel it is. Paul.

Quick question are they peak and hold or are they saturated type injectors!

Guys quick question! i am finally doing the 4G64 hybrid with 4G63 head. Which head gasket have you guys used? i was looking at the Multi layer steel with 87mm hole since my pistons are the Wiseco k564m87 which is 87mm bore, has anyone had better experiences with something else! My aim is...

Would i run into to many problems with tuning 1600cc bosch injectors, i am running a stand alone ECU through a map sensor, These injectors are cheap to buy and will be going into a 4G64 hybrid, 1G heads up!, turbo still playing with but the aim will be approx 30 psi boost.

Has anyone had any experience with one of these their in between a large 16G and an 18G

I have just purchased a bar and plate FMIC Dimensions "core size" 18"X 12"x3" it has cast end tanks with 3" in & outlets both in & outs are opposed at either the bottom or the top which ever way you would mount it. My question is does it make any difference if the in & out were at the top or the...

starting to get one lifter making noise when it wants at revs, idle anytime. running 5w-40 synthetic oil Fram performance filter engine is a 1G engine. Head recond" two months ago, lifters were compressed before reinstall do these lifters fail just like that.