Have a look at this I found it going though my latest edition of truckin magazine find the info here on this site its very interesting!http://www.ststurbo.com/

Has anyone ever seen themselves or heard of anyone doing aftermarket air on a Talon. Im thinking of doing something with an electric driven pump but was wondering if it had been done.

Yesterday at the track I unloaded the car and let it warm up until it idled at 800 RPM then went for a couple runs. After then 4th run I noticed my car idling high when I turned off. It was at 2200 RPM and the logger and afc show 2% throttle. So I look under the hood and there is slack in the...

Quickie for all you that know more about tuning then I do. My car is tuned basically for 11:1 AFR just out playing tonight before I head to the track. At 22psi Im getting NO dips in the timing at all a nice smooth climb and 25* at 7000 RPM. I was just wondering opinions on this and if I...

http://www.dsmtuners.com/forums/showthread.php?p=1666110#post1666110Yes is ghetto yes it works. Just a heads up it can be done and for me its cheaper then buying a kit. Works for me if you into the bling this is probably far to ghetto for you.

This is for the cheap ass like me that didn't want to buy the recirc kit for the type RS and has access to a tig welder and the means to weld aluminium.1) 1" long piece of 1 1/4 OD aluminium tubing. 2) You have to cut the flare off the bov dump I cut it right at the holes 3) Weld the...

This is a write up for the Turbonetics manifold their 50 trim t3/t4 turbo and tial Wg I will also follow though with the building of the 3" custom Downpipe that is needed to make this all work.Text will collaberate with the pics below.1)The Manifold in picture #1 is how it comes and...

MSD DIS II Install on a 95 2G;Parts and toolsMSD DIS II and Tach AdaptorKnife or razor to cut the loom and tape.Various Metric SocketsElectrical tapeSolder + Solering IronShrink TubeTie Straps1)Verify you have everything and have ample time to complete this...

I did some searching and came up with one site that had install insturctions that is Down. I specifically need them for the 2G Talon if anyone knows a site hosting them. I will do the install and Do a VFAQ for our own site here. If anyone has a link please post it.

My car is down right now and I am doing some mods to it Aeromotive AFPR and custom lines Turbonetics Manifold Tial WG and Custom Downpipe is anyone interested in me making some Tech articles for the site?

Never tried this but thought about it at the time of buying my turbo I wasn't wanting to get into my car as much as now. Lately I have been wanting the bling and added coolness of an external gate.My PTE 50 trim is away for repairs and this has me with lots of time to do lots of stuff so...

I have done the swap car runs fine etc... I just noticed though Jim was over last night with his talon 6 bolt swap too. He is using the 6 bolt tube and dipstick. I myself am using the 7 bolt tube and dipstick does anyone know if they ARE different or the same?

Has anyone attempted to build their own sheet metal intake system similar to a maguns intake manifold? If so did you have positive effects etc... I defiantly have the ability and the tools to do it I just wasn't sure if it will be worth all the effort or easier to just buy one? I have a couple...

Just wanted to give a heads up I bought a carbon fiber hood form ETD Racing Newmarket ontario canada. Anways its not a VIS but another brand not sure what kind but it fits killer. Comes with the latch already mounted etc... Fit and finish fit better then my factory hood I had to slightly and...

This should be failry easy for me since Im not new to this engine/car combo. I would just like to know how to eliminate what it isn't that is causing it.Yesterday running mint pull out to pass someone @20 psi and pass fine in 3rd let off shift to 4th and I get in it no probs no sound...

OK so I started out today with changing the calipers. My stock ones snapped the bleeders off so I had a set of rear brakes complete from my parts car. My car has the early crappy rotors so the parts car had the better slotted ones so that meant calipers and brackets too. Everything on well...

Doing a 6 bolt build up as a spare and a drop in for the winter. Couple quetions and suggestions from you guys please. Im no noob so technical is great.I have a full long block which I stripped last night down to nothing I have everything out and ready for micing and rebuilding.My...

This is on my 2G car but it is a 1G motor not that it matters Im using the 2G rail anyways.Ok I ordered mine from prostreetonline.com and recieved it quickly and easily. I also ordered with the rail adaptor. I had read in the forums of people saying these were junk but the cheap price...

As the topic states and I want to recirculate.

Got my Weapon-R afpr from prostreetonline.com came really quick concidering Im in canada took 4 days.Anyways here are a couple pics of the regulator when it came and I will go though the install process and take pics tonight as I do the install and let you guys know how it works. Its cheap...

Well after the swap I had Rm so I pot modded this cured the RM but opened up a new problem now. Even wtih the POT turned off if I get into it more then 1/4 throttle my car sputters coughs and hesistaes alot. Watching O2 voltage it seems to bounce really quick between stonich and mid rich. It...

Ok so I did a 6 bolt swap so Im not totally stupid LOL!When doing the swap my cat is gutted so I just cut the wires off for my second o2 when removing the exhaust because it was so rusted in I couldn't turn it out if I wanted to. Anyways I was going to do the eliminator setup with the...

Well its that time of year. Im pulling the talon out now and if anyone followed I put a 6 bolt in my 95 in the fall and swapped it to a manual. Everything runs perfect etc no problems EXCEPT of course for random misfire.So I am going to try the POT mod before investing into dsmlink. Im...

When you did this mod how much did you have to add for resistance and how much did you have to retune? IE how much did your AFC settings change?

Anyone got any good tips to try and fix the 2 small oil leaks in my 6bolt motor? I took the pan off and re sealed it because I thought it was leaking but it seems to be coming from higher up the block and running down. Both sides leak slightly but enough to leave a drop or 2 of oil in the...

Gonna try and fix my knock with a set of rod bearings anyone know a good source or what I should order? What brands etc??? I know where to get em just which to get etc... P/N from manufactures is appreciated.

OK so drive my car 3 days and no RM today all of a sudden 3 times I get it. So 2 times my car would start to really mis and run like crap and shake like crazy, now the other time it just ran normal but thew the light. Now my question is why does it start to mis and studder.I have 2 ECU's...

6bolt swapped car.1G TB works mine question about adjusting the BISS screw to get my idle right car runs perfectly however every now and then coming off of RPM to a light say from 3rd to holding the clutch in and coast up it has the tendency to stall when you come off the gas for a second...

My fuel gauge since the walbro install is kinda all over. Start her up sometimes and its at like F next min I look 1/2 then back to full again. And it never goes to empy the tank will be empty but the gauge still says 1/4

Anyone thats done a swap on a 2G with a 6bolt what are you using for your lower rad hose? Now I went from an auto to a manual at the same time so this could be my problem but I have a JDM 6bolt in my car now. I re used the old lower coolant hose I just trimmed it but the shifter weight hits...

Who has a copy of this magnus site is down for that section. I would like to Vfaq it if someone gives me a link to it.

So coming to work my car is running cherry all the way just about there and I hit the train tracks SLOW! And it kicks this code and my car runs like a total POS I thought something happened to the bottom end it was knocking so bad. Clear the code while driving and it stays off but when I get...

Ok after swapping to the 6bolt I go for a drive and have everything working mint. Come back go out again and I loose my cluster lights and tail lights. If I stick a fuse in the link for them under the hood it pops every time DEAD SHORT somewhere. Now I came home last night and they didn't...

Well here is what you need I just did it and I am quite sick of seeing the question asked over and over again and no one knowing what is exactly needed.For 2G AWD Talons and GSX only.Here is what you need:Clutch Peddle Assembly Brake Peddle Assembly Shifter Base Shifter and...

OK ordered from dealer 5 weeks ago no cables ordered from DSM motorsports 2 weeks ago no cables I need to drive my car. Does anyone know if the B&M cables will work they sell? http://www.bmracing.com/ under products shift cables? I really need a set bad. Called every scrap yard and dealer...

I have read the guide on how to set the base timing read below. My questions maybe stupid I dunno but I have the timing light on #1 and the car warmed up my idle is about 850. Fans on off like it says coolant up to temp.Now when my car is idling my timing AS INDICATED on the logger...

Anyone come across this yet? I have no tach signal on my AFC or on my dash. This is after 6bolt swap but everything worked before hand. Can't do much with no tach signal to the AFC anyone know where to look or have seen this problem before?

Doing my swap blood cables on BO now for 4 weeks anyone got a set around they can sell me?

Where do I pull the oil on the 90's 6bolt oil filter housing to get adaquate pressure from the port next to the sending unit on the back? Im guessing there its relitively the same spot at the 7bolt water cooler housing but I want to make sure. Please if you can reply in this thread as well for...

Well here starts my Swap I have started already but, haven't gotten to anything juicy yet. I have only pulled the motor from my car at this point. If you can't do that part on your own there is no help for you doing the swap. I have everything which I need to do the swap right now I...

First off will my 5 speed 7bolt stater fit my 6 bolt engine?Next my factory service manual hasn't shown up yet and I need to order a bunch of parts if anyone can help out here is what I need part#'s forT -Case seal where the drive shaft goes in Shift cables (both) Timing and balance...

Ok I have all the parts from my donor car to do the 5 speed swap on my auto. We pulled the trans Tcase Rear Diff shift cables peddles and shifter mount in 2.5 hours last night.Now the parts are really greasy and a mess so I want to know how sealed they are to be power washed or something to...

I want to buy a manual for my 2g talon to aid in my engine swap anyone know a good online place to get one? I have the factory service manual on cd its a PITA I want the real book. If anyone knows please post a link.

As the tiltle states anyone done an AWD swap on a 2g and knows weather you can retain the AT drive shafts for the front or not?

Blew her up at 20 psi on the street.Bottom end is done Rod or rod bearing or crank bearing.Looking for engine options here in Canada. I would like to get a built short block or something similar still want to stick with a 2g motor though don't wanna be swapping in a 1g engine. It...

Hey guys I have been playing with my car most of the summer trying to cool her off. I never had a problem with any overheat until the font mount went on my car. Not that its ever coming off way to much fun with it.I can't get it to stop heating way up amost to redline on a really long...

Hey guys I don't have a manual yet its on order!I installed a turbo Smart dual stage boost controller yesterday and have it hooked to my existing fog light harness because I removed the fogs when the FMIC was put in. Now right now I have to have the head lights on to use the fog light...