This is the end-all interchangeability guide for our rocker arms. You won't find all vehicles on any program or catalogue. Most searches will return a handful of applications, between 67 (Summit Racing) and 153 (Mopar themselves). Realistically, there are 472 interchangeable vehicle trims. It...

I have an inquiry for the few and far members with 420A. I need some dimensions for the belt tensioner hardware. I'm referring to the long reverse thread bolt and the tensioner pulley mounting bolt (87061A). I know their thread pitch but need to know the thread length and total length of each...

I need suggestions from business owners or large scale scrappers. In search of a new recycler to sell scrap convertors to. I've had a business account with Rockaway Recycling for 3ish years. Recently they implemented a new requiring, for every convertor sold, a vehicle title or registration and...

I have conjoined a few ways, and we are soon working on designing/producing an assembly of ITB's for the 420a. The purpose of this thread is partially to gauge interest, as there is a possibility to mass produce these if the demand is there. At a minimum, one or two assemblies will be produced...

I'm sure many of you have experienced a brittle master cylinder reservoir cap if you have worked with many 1g/2g cars. It's my experience that almost all of these cracked and fallen apart, unless it were always in storage. Out of 4 of these vehicles, 3 of mine have broken. Well, rececntly one...

This is the Build Thread for 2gNT V6 Equipped (6g73 swap). Reply below.Here we have an interesting project. Yes, someone is actually engine swapping a 420a equipped 2g, instead of just talking on the forums about it.

I thought this was an interesting thread idea as we approach the end of 2023. I'm curious to see who has the highest mileage on their DSM - of any model.The highest mileage I've seen in person was a 2g non turbo at the junkyard with 253k miles showing. Surely someone has passed half a million...

Alright my fellow DSM racers. I'm needing advice from the experienced. I need to find some ways to improve the rear traction of my 2g. I think the main problem I have is lacking any weight in the rear of the vehicle. It is fully stripped. Bare hatch, bare trunk space and Archer Fab spare delete...

Since Megasquirt has made it easy, I am running a coil over plug ignition setup (damn the wasted spark). I'm wondering which ignition coils I should be using though. I currently have some Audi coils installed but are much too tall and have no way to secure them. I only used them to get the...

Just wanted to share a bit of what's happening in my home garage. In the midst of fully rewiring and refinishing the interior, I also decided to switch up the material used to cover the walls. When the place was built they used some sort of cardboard-like paneling that really sucks for a garage...

A while back I saw a thread asking about the MB367526 shift cable retaining clips, where to find them and why they're getting hard to find.Someone in this thread stated that the brake line retaining clips could be used in place of the shift cable retaining clips and that they're the same...

Curious what everyone thinks about fiberglass fenders for the 2gb. I think I would like to buy a set but am unsure of the quality, but most of all fitment. I don't want something that isn't going to fit or look nice. I see them for sale from places like Andy's Auto Sport, CarID, Ebay, Amazon...

Looking for some hood pins for my 2g. The issue I'm concerned about is the mounting plates being too large diameter so I wouldn't have a surface to properly mount them on. What is everyone else using that fits nicely?

Looking for ideas as to why my NVT-350 is now popping out of every gear (besides reverse, which it will not shift into.)Backstory: I was out tonight to do a test run. From a dead stop, I did a hard launch (started slipping clutch at 4500 rpm, she was hooking so I quickly engaged). Everything...

As the title says.I have the factory spare section fully cut out and the Archer Fabrications delete panel bolted in. I'm looking for the best way to seal it up, for keeping moisture out and eliminating the vibration while driving. I thought something like Windo-Seal might work because it...

Looking for information about aftermarket bumpers. I really like the look of the stock bumper, all besides the fog light holes since I'm not utilizing them on a track car. Does anyone know if I can buy an OE style bumper without fog light cutouts? I'm not sure if something like that was ever...

I've rebuilt my 4g37 and installed a new timing kit, and now I'm trying to determine if I am using the correct timing mark. I see a small notch behind the washer on the crank sprocket and was using that to time the engine. Reading through old threads, it seems as if no one could provide a...

Hey guys, I'm about to install the distributor assembly on my rebuilt 4g37 ('92 Eclipse) and I have a quick question. I see 2 dots on the gear and I'm not sure which one to use. Each dot is 180° from the other. The way it is pictured is how I assumed it should go with the engine at TDC. The red...

I'm wondering if there's a difference between each of the balance shaft seals on a 1g 4g37? I'm shopping for new ones and keep seeing them labeled "right side". But I haven't found any labeled left side... Visually they look the same diameter to me. But they are different colors on my engine...

I'm not really expecting to get an answer since 420a gurus aren't around anymore, but I'll do this anyway.So I've acquired a few sets of 420a cams. Bought them up while they were all around $400 for a set (some are discontinued completely now while others start at $580). I've already decided...

Long story short, I've been driving 5 speeds since my first car. Some time back I decided to get my first and only tattoo of a 5 speed shift pattern. It's just a copy of something the artist found on his computer at the time and printed a template of.The reason I'm sharing this is, well just...

1GNT, '92 Eclipse GS with 4g37 and 5 speed.I'm missing the 2 upper belhousing bolts, and was wondering if anyone happens to know the dimensions of them so I can buy some new ones. Finding originals is unlikely. I'll also need to know so I can purchase some longer ones to mount my block to the...

I need a new driver side power mirror for my '92 because mine is pretty badly busted up.The question I have is if there's a difference between any of the side mirrors from '90-'94.I'm finding some on Ebay that are only advertised as fitting the '90-'91 models. But from the pictures they look...

1G GS 4g37I'm wondering which fuse or relay is for the fuel pump. Nothing on the box covers label it. I thought it might be shared with the MPI relay.I'm getting no power to the fuel pump. Underbody wiring looks fine so I need to know where else to check.

This is the Build Thread for Saving The Eclipse!. Reply below.

Anyone know if this will fit the non turbo models? Based on the overall shape of the cars I think it's the same. Just wanted a 2nd opinion before I spend almost $300. Thanks :)https://archerfabrications.com/af-2g-dsm-spare-tire-well-delete-panel.html

This is the Build Thread for Restoration Project ('93 Prelude). Reply below.

I think @Widgmaster will get the better laugh (he's the photo geek in case you didn't notice).As I'm searching for another car to use as a daily driver (wrx totalled and chevy for sale), I had a funny thought and put it together on my computer.I keep running across Mitsubishis on Marketplace...

Anyone know the thread pitch for the ball studs on our rear hatch? I didn't realize the new hatch I bought didn't include them and mine was placed on a car sent to the crusher...I've seen that some of the new shocks you buy include the studs. So that's an option, but my shocks still work...

So I just replaced my camshaft position sensor for the 2nd time (1st time since rebuild). While it was off I noticed 4 lines of wear on the cam magnet and a small section on the sensor where the magnet was rubbing against it. The last time I replaced the sensor I did not notice any of this, and...

Anyone know the thread pitch on the 2g shifter? I'm looking into an aftermarket shift knob finally. I don't like the "universal fit" with plastic self-threading bushings. That seems like the cheapest option ever and quite unsafe. I may just end up continuing to use the OEM shift knob since it's...

A few years ago a dirty-minded soul made a joke about those toyota water pump gaskets and people ran with it ever since... but why has nobody made jokes about the LZ9 intake manifold? Am I the only one that actually looks at diagrams? lolYes I bought a Chevy... I've never been a bowtie fan...

This is the Build Thread for The Daily Driver, My Only 87 Burner. Reply below.

I'm wondering what the stiffness difference is between the 2.4 valve springs and 420a valve springs, and also if they're similar in diameter & height? I know the best way to figure this out is to remove both and do a comparison, which I'm willing to do. Just thought that possibly someone has...

My car stil has the original thermostat in it. At 25 years of age I figure it's time for replacement this spring. I see that the original is a 185 degree thermostat. I'm wondering if it's a good idea to use a 160 degree thermostat. It's not a daily driver and I run it hard sometimes. With the...

I'd like to delete my IAC valve. It's something I've added to the list for Spring.What I'm wondering is how essential it is to the function of the engine. I understand it will change the idle speed and prevent automated engine revving while shifting, but that's perfect because that's exactly...

Just wanted to take a second and raise awareness of the scams that happen every single day on Instagram. Here is the account that tried me today.He started off messaging me telling me some sob story about how he can't pay his phone bill so he needed to use my phone number or something. I...

I was rummaging through my old files and folders when I found a notebook from a few years back (2016). The notebook is full front to back with random notes I made. Here's one of my poorly made drawings... I can see some errors throughout, glad to see how I've learned a lot. I was not an artist...

I'd like to add one of these to my tool collection:I've always filed mine by hand. This seems like a handy tool, I'm wondering if anyone else uses one and what your thoughts are

I figured this was an interesting idea for a thread. I am one of those junkyard floaters that stops by once or twice per week to see if anything good is there. Occasionally I see a DSM or 2.I'm going to use this thread to post photos of every DSM I see at the yard. Maybe someone will...

I'm looking for suggestions on which carbon fiber hood and rear hatch is best for a 2g. Which ones have the best quality and fitment in today's world? I've heard of some having poor fitment and others cracking/fading easily.

No matter which holidays you do or don't believe in, I hope you have a great one!I wish I could've had the Eclipse out for Christmas pictures. But it was nice to cruise the WRX too.

Found this meme on Instagram

Looking for some aftermarket mirrors for my 2g Eclipse. I'm curious what's out there because I'm not finding much of anything. Feel free to post anything custom you created. I'm wanting something that looks better than our cheap stock mirrors. If they're also lighter or more aerodynamic that's...

Hey guys, quick question for you. I'm wanting to add a new battery to my stock pile of parts in preparation for Spring. I'm looking to downsize a significant amount. My current battery is huge, putting out 850 CCA to run the sound system I had. The sound system is now removed from the car and I...

Since the day I bought the car I've had a mind full of ideas as to which direction I should go with the paintjob. It still had the original paintjob when I got it. Unfortunately it wasn't saveable. So I went with the quickest and cheapest option which was to spray it flat black. I did that just...

This is the Build Thread for My First Subaru. Reply below.

I think I got a rod knocking already. I'm not sure yet but there's some sort of knock near the oil pan area. It's really quiet once warmed up but on a cold start it's scary.Engine literally only has 4.5k-5k miles on it. I used Clevite bearings, standard size since the crank journals were still...

I was browsing through my newest issue of Summit Rcing magazine when I saw this beautiful black 2g Talon. It's the first thing I noticed when I flipped to that page LOL. I'm glad somebody still feels these cars are magazine worthy.

I'm looking for some bolts that hold the valve cover on to replace the stock ones. They seem to bottom out before there is enough torque to fully seal the gasket. I've changed the grommets multiple times but all the aftermarket ones are a similar shape and it doesn't help. Even the measurements...