I have a 1995 Eagle talon TSI AWD with a 7 bolt... Curious if anyone has a good source or advice on picking up a complete running engine. Been pushing coolant out of mine so it looks like I have some of head damage. I would prefer to just get a new engine instead of tearing everything apart and...
Hi all, I installed a VSRF FMIC (http://www.vr-speed.com/vrsf-2g-dsm-front-mount-intercooler-kit-fmic-95-99-eclipse-talon-turbo-2g-dsm.html) and every since the install. Coolant is boiling out into the overflow and will completely drain the system if I drive for more than 10-15 minutes. My temps...
Ok so here is my purchase plan, please let me know if you guys see anything wrong with adding these items to my setup. I will be putting the order in the next day or two.FIC 850cc Mitsubishi DSM Injector Set (Low-Z) IS125-0850...
Sorry I meant brand wise, and Im not trying to make a ton of power just want a quick good running car Im happy with the speed now but i know this turbo is capable of alot more. So dont really have any goals just want to be more in control of whats going on and utilize the turbo i have a bit more.
Does a wide-band o2 replace a current o2 on the car or do I need to add an additional bung? Also can I get suggestions on which injectors, wideband and best place to buy ecmlink and the injectors and wideband. Thanks.
Hey guys been a long time since Ive posted. Been searching alot and cant really find any definite answers for my situation.Here is my current Mods.EVO3 16g @ 13 PSI
3" Downpipe back exhaust
INjen Intake with K&N
Walbro 190'
HKS SSQV
Hallman MBC
Boost GaugeBasically I want to open this...
Having trouble finding a housing for this turbo It needs to mount up to a t4 flange and has the stock evo flange on it right now anyone know where I can get a good Housing for this turbo its the stocker off a evo9 Forced Performance Turbochargers: Mitsubishi Evo 9 Stock Turbo
I did this to mine first time porting It didnt solve my boost creep all the way but cut it in half I get 10 PSI at 3500 and creeps to 15 by 5k it wants to go to 20 sometimes other times it keeps 15 to redline, but either way its not running like it should 15 psi to redline. but before I couldnt...
Ive had a parts dinosaur timing kit on my car for about a year now went ahead and got thier water pump tensioner and most of the pulleys and bearings that needed replaced also. Took it apart a week ago and it all still looked good, motor running strong.
Well im pretty damn broke atm so no. I asked to borrow all the local part stores and none of them lend them out only other way I could think of would be to tow it to them and have them check or buy a scanner.
I did the haynes test on the CAS and CPS signal wires CAS Is Alternating .4 to 3.7V And CPS is Sticking at 3.7 Im sure this means I need to replace my CPS Correct? Also hoping my Balance Shaft Belt didnt go knocking out my CPS With it or something else bad. I checked timing and its still right on.
Hey guys I searched but didnt really find what I was looking for it seems this topic has been coverd alot tho.I was driving around a corner and all the sudden my car died got it to the side of the road and luckily had all my tools on me.All IC Pipes are connected
MAF IS connected
No...
I dont have expierence with your specific turbo/car but I just installed a evo316g on my 2g last night and I had to bend my stock water lines a bit to get them to go on right get creative with it just dont go overboard and break them.Now that I read your post again I think you may be refering...
DSSA- I tryed to order through mitsubishi parts.com but they dont ship glass. If I order through your site do you guys ship glass? And just to clarify you can get MR447532 right? I see this is the cheapest one And I dont care about viewable area cause they are gonna be blacked out tint wise...
I just got done painting my car and in the process I had to remove the rear quarter windows I found new windows online and had always thought that all talons and eclipses were the same but this website ( https://www.mitsubishiparts.com/oe_parts_catalog.html ) is confusing me cause the 99 windows...
A picture would help but If i am understanding you correctly, I would spray pb blaster in there let it sit overnight If you have a welder get a cheap extension weld it on there and pull it out. If you cant weld some type of 90 degree seal pick or anything to that nature. Last thing I would do...
I got a 95 Talon that has all 2gb parts on it and am adding the wing as soon as it gets here can anyone that has a stock 2gb with this spoiler please get me pictures as to where this mounts on the hatch or better yet casue I love to make stuff perfectly stock a measurement from the edge of the...
Ya I learned it the hard way although when i hit my curb it was from me being stupid. I had to replace all 4 rims cause they no longer made the ones I had and couldnt find them, my front bumper broke and also my lower control arm bent. :cry:Very simple to replace If you are tricky you might...
I am 99% sure you bent your lower control arm, dont worry these arms are designed to bend in the event of an accident to avoid subframe damage whatever side you hit I would check Your lower control arm is the piece that looks like a boomerang has a ball joint on one side that bolts to your...
Ya good call cause you would have wasted your time taking out you driveline just to find out that you car wouldnt have even moved without the driveline hooked up.
Replace the wheel too, And I think the subframe would be damaged also maybe just tweaked a little. Just make sure you dont accept it from the body shop not driving straight the wheels not sticking out straight or anything looking off.
If you look down the left side the paint doesnt match from the door back it might have been in a wreck that hit something in the front or rear look carefully.
I dont know if you knew this or not but I figured I would let you know instead of spending hours blocking down body work I can usually do a 6 hour job in 45-1hour. After about 10 minutes of the filler hardening you will notice it start to get tacky you wanna wait till its the perfect composition...
oh cool thanks for that pic I think Im just going to grind that area where its damaged on the case, Paint the damaged area put it on then take it off after a few hundred miles to make sure its not rubbing if it is ill buy a new case. I have no clue what the gouge is it looks like it came from...