Hi I am having the same problem. My o2 Sensor only have two wires. Mine is the japanese version (yes jap version)I have gone through my ecu pin and found that I do have pin 60 (yellow) But in the connector to the o2 sensor is only blue and White.
Anybody solve this issue ?
Thanks alot. ๐๐ผ๐
I Think I already renamed the ceddy emissions file with the original file and replaced it to the directory. (So it has the same name)
The emissions functions is visible in the ecuflash. Is that not correctly done ?๐I do run MAF still and I have the ceddy bigmaps in a zip...
Hi guys and girlsI do not have a rear o2 sensor on mine gst i do though have tempsensor on my cat. ( jap version) But that is no pin in the harness so it wont look for it anywayMy question:
Where in the blackbox, ecuflash do I take of the rear02.
Because my front o2 faults a CEL code when...
Thanks a lot. ๐๐ผ A manual boost controller i Can easily install. But What about that solonoid there is. Is it the ecu there control the boost through that I and Will it confused the ecu somehow ?I Will hope for the best ๐
Okay Thanks.So just to be sure. I Can install the 560cc (change the latency like showed on eatsleepdsm) and still Drive my Old t25 to the mechanic to change it to the 14b or t28. I might go with the t28 because I had it rebuild.But How do I make sure the boost is being on 14-17 lbs like...
Okay. I am confused. I just want this to work without killing the engine. Can I install the 560cc injectors and flash it the my ROM on blackbox (read the article in eatsleepdsm) and still run the t25 turbo to the mechanic. Change the turbo to a t28 and run safe Home? Then there should be fuel...
Hey man. Thanks a lot. I do have the walbro 255 installed and the fpr. I just dont know How to start this turbo upgrading process. I have some evo 560cc as Well I just Got cleaned. If I change the turbo to my t28, how do I make it stay in the save zone without changing to bigger injectors.? Can...
My setup:
Stock engine - rebuild engine with new Stock componants.
Upgraded smic from a vw gti (350-400hp) custom made to fit
Magnaflow catback exhaust (cat still installed)
New fuelfilter
Fuelpressure regulator from fuellap
Stock 450cc injectors
Blackbox with ceddymods installed
Evoscan...
Hi DSMโerI have the very rare version Eclipse that was imported to Japan from US. 180 speedo.But mine came with 230 hp and not 210 hpWas the Japan version imported with different setup of injectors, turbo (14b, 16g or t28) ?Hope to get some good answers ๐
Okay. I just turn on ecuflash, Press read and it kinda choose the vehicle it Self ๐ then I try to flash the changes I make and then it comes with that message. Shall I choose vehicle first, then read and after that reflash ? I am confused ๐
Hi guysMy blackbox will read in ecuflash
But when I try flash it, it comes and says error (check picture)Evoscan I Can read, and read codes and delete Them also without problem.Please Help, had to cancel the tuner because of this ๐Do I need another blackbox ?
Thanks for answer.
I just bought the innovate wideband which i am setting up so it does not run in the original o2 sensor But with a bung further Down the downpipe.So when I have installed the turbo and injectors I just send (transport) it to the tuner with my pc and getting it...
HiI have now installed the Blackbox, setup ecuflash with ceddy mods.I am planning on installing my FP t28 turbo and flash the bigger injectors and set the latency to 0.048 as I found in this DSM Forum.But is it still safe to drive without a complete tune?For info:
I have the...
My problem is I cant get or find the partnumber for the Japanese version. ๐ Mitsubishi in Denmark does not even know What Eclipse is because they werent sold in Denmark or Europe for that matter
It is a true jap version (which sometimes is more headache) hehe but do I just Cut the heater wires and Connect the blue and White one from the new o2 sensor ? Or shall i find a 02 sensor with only 2 wires ?
Hi guys and girlsMy o2 sensor only has 2 wires (White and blue) and not 4 wires as it came with.What to do ๐คท๐ปโโ๏ธHopeing for some good answers
I just watch the first one. It is gonna take me 30 days๐ I Think i Will wait for the summer to this upgrade and watch it closely a few more times ๐
Nice. Thanks for the tip. The car is Stock for now. But I just bought a brand new t28 turbo and 560cc, and a custombuild smic, injen intake pipe for turbo. So I it is stuckish.
Is it easy to install and Can it be done while the trans is still on the car ?
Hi I went Yesterday to do the blackbox swap on my โjdmโ japanese version Eclipse. And the car started and drove fine. It did not stall out at all. No CEL. Even after
45 min of driving it around, city and highway.The only thing I experience was that hesitation it has in the start of the...
Hey guys.
I am trying til build a Stock looking Eclipse and hiting 12-13 second in 1/4 with big t28 setup, performance smic(custommade) fuelpump walbro 255, 550 injectors, ect. All maintaince is done and so on. But my car has to look as Stock as possible due to rules in my country.So I am...
Hi guys.Not an expert, but is there any difference between the 2g turbo model injectors from auto or manual version. I know there is with the 1g. But is it the same in the 2g?
Thanks a lot. I am only installing a t-28 and 550 injectors, because i could not find the t-25 anywhere, and it has too look stuck. There is a guy here in Europe who has sold me the apexi SAFC for 80$ Yesterday. I Will start with that. I have looked for the greddy e manage you send me? I cant...
Yes! If they cant open it, they Will send it to Mitsubishi, get it open and it has to get redone. If you dont believe me, you Can look up the danish rules. They have gone nuts ๐ But Imma go with the Black box to see if it Can run. I could be lucky
I do have a 96 ecu (non eprom) installed now, and no they do not know if it is the Black box or the regular 96 ecu. But I cant run dsmlink for example, because they Will open up the ecu to see of it is original. But some say i cant run the blackbox ecu. But Maybe I should try install it too see...
Thanks. I am running it street legal as possible due to the fact that it is not allowed to take the ecu out and put a standalone in. The Cops are allowed to take the car and make Mitsubishi dealer it legal again with new ecu (which cannot be bought) on the spot, if they cant, they are allowed to...
Thanks. I have not bought the injectors yet, But I do bought a Big t-28 and getting a custom smic for it there is almost finished. So Maybe 650 or 550 would be fine with a t-28 turbo ? I have looked at the SAFC on extremepsi, that is kind of expensive, so Maybe I need to find someone who Can...
Hi again. I Think this might be the option, going for a piggyback setup since the Blackbox ecu swapping issues might Will accour. What type Can I buy here and is it and easy install ?
He says it is the FPbig T-28 turbo. I cant not put the 14b on it since the inspection people al ready seen the car and the turbo ๐ i Will try get him to send more pictures
Hey, thanks so much for that info. I am not an expert on these cars. But does know a little bit. heheI need to change the turbo and I think this a good "upgrade/replacement" to keep the stock look and thinks at stock as it can be because of the rules we have.
I will get at tune down the Line...
Hi DSM'erMy T-25 is done :(
I am not able to use a 16g or a 14b do to rules in our Country. (I already have the 14B with the J-pipe kit to smic on the shelf with all supporting lines).So I am in need of a new turbo. And I have found the Big T-28 Turbo from Turbokits.com, which looks just...
Thanks so much. ๐ช๐ I live in Denmark where almost everything needs to be Stock or Stock appearing ๐ so 14b Will be my option since I had the turbo on the shelf.I have only installed the 255 walbro fuelpump with no other modifications. The car runs and drives fine. (For info my car is the...
I Can check tomorrow What colour they are. I do not have a fuel pressure regulator, But if needed i Will buy it and i Will also change injectors if needed