Also this gst is stock if anyone knows please let me know ASAP. I’m going to drain the tranny this coming weekend and replace it. Any suggestions on what I should put in it? Price is not an issue.
I posted yesterday but I don’t see my original post anywhere anymore.I have this noise in the front in upon hard acceleration. If I drive the car easy I have no issues.Here is the video.
I’m going to make this a short and sweet as possible. I have this noise in the front passenger side that I’m having trouble tracking down.Its a raddle, or even possibly a grinding noise I hear. It only happens under acceleration. If I drive the car easy no noise. Easy up a hill no noise. Soon...
Iv been looking around for an answer for this question but I can’t seem to get a clear answer.If I were to delete the egr valve, charcoal canister, Silanoids. Pretty much all the vacume lines. Will my car need a tune? I have no block off plate for the egr is it ok to just cap the two male...
Iv gone over a couple post, I’m sure this topic has been talked about a lot. I’m at the end of my journey with this project Iv been on for the last 8 months. I bought the car about 10 months ago from a guy 10 hours away. Driving the car home everything seemed fine till about the last 2 hours. A...
Yes sir! It looks just like that on mine. It can’t be an extra, It came off the car somewhere. It’s labeled a 7 on harness if that helps.I’m still not done putting it togeather but I wouldn’t like to start this thing without knowing where it goes.I see only 2 banjo bolts on the turbo...
Thank you for the help, I’m trying to put something together I didn’t take apart. It’s been a rough 8 months doing it.I do have this bolt I have no idea where it goes It has some paint on it.Some fluid runs though but like I said I didn’t really take this car apart
This will be my first time doing this, I appreciate all the help and the reply’s.So you’d be safe to say everything is correct? I’m guessing the slave has a ton more power then my finger and will be able to move it
ok I’m going to word and use pictures to explain my issue the best that I can. Tonight I just put a new clutch in. After installing I noticed my clutch fork is properly adjusted in the middle but will only move in one direction. Is this right? The slave should push it in the direction that it...
Ya iv went over the engine Components time and time again to see if iv missed anything being broken. The car did have a new turbo so I think you may be right.
Ok fellow dsm community! Iv retreaved a couple more pieces from the oil pan on these “trophy’s” I have. Some of them look like they have oil holes through the side of them. Iv went over all the parts again and have found nothing broken. All pieces of the berrings are in place.
I’m at work at the moment so when I get a chance I’ll take some more pictures and send how the old/new berrings look. (The ones he said were replaced recently before the tear down)I’d seen some little metallic shaving on the old/new thrust berrings. Il show pictures later.
True, Iv went over the engine 10 times with no broken pieces I can see. I’m thinking whatever those pieces are that’s what was broken before. He replaced it and didn’t get it all out of the engine.
No tests are really needed at this point, the car has 200000 miles and I have the money and someone who knows their way aroundIv taken it to several people and all have said the same thing. Rod knock.Iv already taken the engine apart and sent it to the machine shop to be pressure checked...
Hello fellow dsm community!!A couple months ago I purchased a 1997 gst. Can’t say im very satisfied considering 2 week after buying I had this horrible tap/knock coming from the engine.Iv decided it would be a good idea to juSt get it rebuilt.I’m really looking for tips on this rebuild...
As far as I know I’m running 2 codesPo170 fuel trim lean or rich bank 1
Po505 idle air control motor circuit malfunctionI replaced the iac the other day with no luck in the high idle issue also the rpm gage keep going from 1000 - 2000 bouncing revving and falling over and over. The car...
Iv got pictures from under the hood and the towers look like they are in good shape. Iv not had a chance to see under in the wheelsMaybe I’m just not looking in the right place. I’d love to have a decent 2nd gen gst or gsx for around 4000
im going to take a look at this eclipse 3 hours away Sunday and he sent me some pictures of the underbody. I’m really just looking for a Professional opinion on this. He’s askinf 3750 for the car.Here are some pictures.