What’s the part number for turbo fiav? And are turbo fiav same as non turbo? 3000gt fiav is part number MD614431 and looks identical. Anyone know if they’re compatible?NA part number is MD614373

My goal is to able to turn on the d/s ac cooling fan using the factory setting (blower fan switched on with ac button pushed in) while being able to control the blower motor (on or off). If I unplug the connector to the blower motor, it works how I plan to use it.Can I use this switch on the...

My power mirror cooperate when it felt like it. Here’s how to improve it.First remove the door panel and disconnect ONLY the mirror connector, and depin the connector on the mirror. Note: take a pic so you remember where the pins go. This is by far the easiest connector to depin on a 1g...

Picked up a 2g MAF plug to replace my broken PTU connector. The 1g uses thicker gauge wire and I wanted to extend it. Will the different wire size cause issues?

At the end of the travel, my competition clutch fork twists because it making contact with the case on one side. WWJD?Is the collar on the transmission compromised? @twicks69

Happy Birthday @steve!

Noticed these marks on my 6 bolt block. It’s a row of 4 and 5 so I’m thinking it’s rod & main bearing sizes. My guess 1 = undersized??? 2 = standard 3 = oversizedAny thoughts

Two questions1. Are these good quality? 2. What color for my set up?https://jdcustomsusa.com/products/jdc-titanium-exhaust-manifold-stud-kit

Anyone know if this place is still in business? Went to check out and payment section doesn't work.http://dsmpartsonline.com/shop/index.php

Just received new oe tob. It does not look centered. Is this normal?

My oe tob of 2 years started making noise and when I press the clutch, the noise goes away and rpm’s drop. In the video you can hear and see what’s going on. Engine has a hard time reving and rpm drops faster with clutch depressed. Don’t think it’s crank walk as I don’t see any movement on the...

Last week, our 10yo ceiling fan wouldn’t turn on, no lights, no fan. A few days later, it worked so we thought it’s time for a new fan. We didn’t need it until last night and of course, it didn’t work so I decided to look into it today. Checked for power at the fan and it doesn’t have power...

Anyone know the part number (oe or aftermarket) for the outer rear wheel bearing dust shield?

Do these look correct for 1g 4 bolt rear? Just want to make sure before I start. ThanksLooks correct on RockautoFound pic on JNZ's site and it looks about right.https://jnztuning.com/product/wheel-bearing-kit-1g-dsm-rear/#

This also happened to me racing my teg gsr vs mr2 turbo on the highway when I was 18. YESSSSS, DUMBBBBB!! Luckily I didn’t hurt anyone except my ego and rid the guard rail. Mentally couldn’t drive for about a month.THIS IS A BADDDDF DAY!! Stay safe!!

I'm having an issue when starting the car hot. It would crank, no start. I know it's fuel related because when I add starter fluid to the IM, it starts right up but would idle lean. Then drive it, and issue would go away. On cold start, it's 11's afr and leans out to 14's as the car warms...

Are these still available? Anyone have the part number?

Crazy what people do for a few bucks. Yeah I know, it’s Detroit but wtf!!

Anyone have the part number for this clip? It goes on the inside triangle cover.

I want to tweek my target afr's for better gas mileage so I came up with the map below. We don't really use the upper right & lower left corners, and anything past your rev limit. I noticed that crusing at 80mph my afr's were in the 10-12's. Unfortunately, I wasn't logging this. Do you see...

I can not seem to find the part number for the clips that goes here. Does anyone have the part number?

I luckily found all the missing pieces for the spare tire cover. Looking at the carpet, it looks like there was a trim piece or something that goes here. Can anyone verify this? I do have the clips

To remove the two trim pieces around each quarter glass, you’ll want to understand how they’re fastened.The first piece you’ll need to remove is the bottom trim. It’s held on by the top and bottom channels on the trim, to the clips on the body. Use a plastic trim tool here.The lower...

Is this trim the same on 1ga & 1gb? Think I’ve asked this before, how does this come off?

I have about 3k miles on this freshly built block. Changed the oil a week ago and very minimal glitter in the oil. Barely noticeable when you swirl the oil. Anyhoo, is this amount of blow by normal on a fresh build?The amount in the glass is only 1 of 2.

Is it possible to 60’ a 1.6 from a 400awhp? If so, what rpm’s are you launching at?

Is it a must to have a roll cage/roll bar to run seat harnesses? Was thinking about having a bracket made that is bolted down by the rear seat bolts (to body) and anchor it that way or is that a no no?

What is the going cost now for manual seatbelt swapping a 1g including panels?

We park our tsx outside and the fing birds are attacking both mirrors and 💩 ing all over the place as if they had one too many beers and a Taco Bell 4th meal at 2am. They also scratch and dent mirror covers. It drives me nuts!!! I’ve had several different cars throughout my life and don’t ever...

I know some of you have an issue where the wipers turn on when you launch the car. I don’t have that issue…yet 🤞. I had the column cover off and was thinking you could probably rig something up with a light spring to prevent this. This seems like a simple project and there enough room under the...

Just saw this in my YT feed. Anyone try or know about these?

I’ve had my Bosch alternator for about 4 years now with no issues. Had to do BSE a few months ago. Just looking over the car today and I noticed one of my alt case bolt was completely off. The frame helped me from loosing it. I also have urethane mount all the way around. So I put the bolt back...

Just curious what automotive background or anything interesting for that matter, people have.I’ll start but try to keep it short.Grew up knowing almost every car by its lights when I was about 10 so I’ve always had some interest in cars. My brothers who’s 4 years older bought an 89 tbird...

Spare parts 😜

This add looks extremely fishy. I don't think it's legit so please be carefulhttps://www.dsmtuners.com/marketplace/apexi-n1-turbo-back-exhaust-thermal-muffler.1599/

This article is to illustrate how to shim the pivot ball on a 4g dsm transmission without removing the transmission (transmission still in car).You will only need a few tool. 14mm open wrench (modified) Washer with 9.9mm opening Telescoping magnet Long fat head screw driverThe 14mm wrench...

So my innovate mtxl plus has been acting up lately where the gauge would stay full lean for a few seconds. My replacement sensor isn’t that old, maybe a year and about 1k miles. I called innovate ms and they told me that there’s a firmware update that was released a few months ago.My laptop...

Just went to pick up some groceries and videos a pull. Didn’t bring my laptop so no log. I just noticed my afr’s were lean af at the beginning of 3rd. I’ve done pulls from 3-8k and they’re pretty dialed in. This can’t be normal?

Geez! Watch out for this scam at the pump.

Since the timing belt tensioner arms are no longer in production, I was wonder why someone hasn’t made sleeves/replacement bushings for the arm. They are removable, correct?

Not sure if this the right place to put this. When I got my car, it had rusty coolant. This goes for my jeep as well. I’ve ran evaporust in both and I have to say this product delivers. Here’s some pics of my coolant reservoir and some part I had laying around. Have some brass shifter bushings...

I’ve always plunge cut everything and thought it was normal for the cut off wheel to just chip away. Never knew gouge cut helps with this and is probably the correct technique. I’m sure all of us just want to cut whatever piece and move on with the task at hand.Knowledge is powa!!

Currently I have the stock p/s fan and spal ac fan. On hot days and after some driving, temps start to creep up 216* when I'm stopped and will come down when I turn the ac fan on. So I've been thinking into installing a 3rd pusher fan on the ac condenser opposite of the stock p/s fan using...

I picked up a used oe flywheel and had it machined with correct step height. Bolted it up and torqued. Set up a dial indicator and this is what I am seeing. What are your thoughts?@twicks69I have runout of .004 and the thread below says .005 is the limit. Is that accurate...

I’ve been watching a lot of haltech’s videos. This is a good one going over volumetric efficiency in general.

I'm considering going back to stock flywheel from lightweight. Are stock 6 bolt flywheel or equivalent available? Anyone have the part number for eo flywheel? All I can find are lightweight flywheels.

I’ll try to keep this short. Built short block with about 1k with balance shafts and new bearings. Break in oil looked normal and nothing seems off. Been adjusting oil pressure by shimming the oil pressure relief valve nut (the big one). Finally got it close all the way through the rpm band. I...

After I drive the car, there’s ENGINE oil on my slave cylinder. I don’t/can’t see where it’s coming from. The turbo oil feed from the head is blocked off and not leaking so I assume it’s coming from here.Just want to know if anyone has experienced this leak. I did not check this after I got...

When you put led corners, it turns the light yellow. LED or regular???