thanks for response I was doubting about convertible ecu but I did research it s not..if you look at pictures you will see that..so your opinion is adding a a crank sensor ? if it s, I don t think I will do it:) I wish I bought a evo ecu I never thought it will be trouble for me..I can flash and...
I am searching article on this forum @steve I read the steve's articles I think Ecu can not get pulse from CAS and it s dying. I have green top CAS.. By the way I bought brand new black top CAS also I am waiting it. if ECU gets pulse from CAS and it orders to give 12v from pin 13 and car...
i was thinking about same thing. Can i do from fuel pump check connector? By the way i am doubting about pin 13. it s free now Do i have to connect it to somewhere?
i am not sure but i found article about convertible ecu fuel pump. it does not look like my issue. some transistors removed on this ecu for fuel pump problem. I bought blackbox ecu maybe problem is that. I have green top CAS..
Has anyone been able to run a 1999 ecu on a 1990 dsm or what should I do? Even though there is a patch harness, the car starts and then stops immediately. My vehicle is a 1990 AWD. I wrote to a few forums but no one answers because it's an old topic now. I checked the rom. it s allready ceddy...
i have a question pls someone help me?. I did everything as you shared the pinouts on my 1G with H8 ecu but it stars and it dies within 3 seconds. I hear a tick sound from MPI relay then car stops(
thank you I wish I could run it. i have socketed ecu also i think i will find ecmlink..Really sick and tired . I wasted my time..I hate myself sometimes but it would better to see car runing..I followed the this pinout instructions..
But when i plug the 1G ecu it works very well..Something is wrong but where is it:) I hear tick sound from mpi relay then car stops..it works very well until to 3 seconds..By the way I did not replaced 2G knock sensor..I don t think it would be problem..
hi
ı did not have money and i decided to plug 2g 1999 blacbox(FWD) ecu to m 90 awd. I did swap harness according wiring schematics car is starting but after 3 seconds I hear click sound from my MPI relay and car is dying:(( ı guess mpi cuts the fuel pump I really confused. I have tactrix cacle...
Hello guys i know some people can say something about my decision but i want to end up this process i have 2G ecu (1999) in my 1G. my problem is about dying after start. Car is cranking and starting after 3 seconds I hear click sound from MPI relay and it dies:( Finally I connected to ECU via...
I wanted to try a fantasy :) and I wanted to try the 2g black box 1999 model (MD359402) ecu over the 1G awd 1990. There is a lot of mixed information on the internet. I didn't know which pinouts to use. I plugged the converter to car and it worked in first time without problem. However, when a...
Please can you describe detailed because no one understand this tip in Turkey..I really hate this steering control.. I can not hold the car on the road and it makes mi crazy it s like sliding on the road..what about bushing? Front K member bushings? Does it make this issue?
thanks for tips yes I was talking about the same picture which is shown...i guess my car has damaged from left side by previous owner..When my car enters a ditch, the steering wheel turns left and right. Additionally, my vehicle slides left and right depending on the bumps on the road. I am...
Thanks but we have only 1.6 FWD version I saw only 2 AWD's galant in Turkey.. Shipping option is not for me..Really I am sick and tired for paying custome and postage fee that s why I am trying to find in here. I thought I can match with other mitsu's but I need to fix it..
Hello, there are no Talon parts in my country, but many Mitsubishi parts are available in my country. I ask you, are there parts from equivalent cars for both the knuckle and the steering rack for the 1990 AWD? For example, like galant..
Thanks
i think it s not clone by the way i don t know left one also:)) Seller sold me as a free:) but it looks good tool:)) i got it about 79 pin but how to provide the voltage on pin 79? Is there a information about that i don t want to waste your time thanks
Thanks for reply I have attached the picture pls let me know. Do I need flash port🙏🙏I am trying to solder. I have 2 instruction about pinouts. I am confused about fuel pump relay, one of them is showing 13, other one is 56. it shows 8th pinout on the 2G
there are a lot of information but not clear I am soldering ecu today and i am waiting OBD2 port. I ordered last day..I hope you help me about my issue..By the way I attached the eprom to 91 ecu by myself I will dump phantom knock version bin file when i got my willem eprom programmer:) if it...
Guys I am trying to do same thing but I am not sure about after wiring? For example we did jumper harness stuff so what we are going to next? Firing order? CAS? Just plug and play?I have 99 ECU, I think I don t need flashing port for Tactrix? Please can someone help me about 99 ECU (MD359402).
Sorry guys but this is old car and I am sick and tired to searching the noise each time. I need to eliminate the knock until to 4000 rpm and I guess I can do that with ceddy mods so I can use speed density with this ECU also.ECMLink is starting from 300 dollars at least v2.5 (does not support...
Everybody can do it with EVO 8 ECU and I saw on youtube (2g ECU on 1G) also I hope I can do that because I spent money for that also :) you make me sad:(
Hello
First of all, although I have researched many topics, I still cannot reach a definitive conclusion. My vehicle is 1G.However, since I was dealing with phantom knock and I did not have money to buy DSMLink, I bought a 2G 99 model ECU. Because I thought maybe I could handle this with...
Due to the country I live in, it is impossible to find the Talon parts, but there are too many fwd Galant parts, so what are the Galant parts that are compatible with the parts of the Talon? Especially knuckles?
Hello
I have 1990 awd talon so I want to use this TB.. Can i use this TB on my talon? I never seen before like this. What vehicle was this throttle body from?
thanks
yes i know I just want to be sure about caliper parts:) I can find banjo lines from here:) let s order these calipers...
thank you for answers and understanding...
thanks for reply
If i buy this set I don t have to buy anything except 294mm rotor Am I right? caliper bracket comes with this caliper..I will just buy 294 rotors.. by the way I dont have ABS because my talon is 90 model..
First of all I can not find DSM parts in my country. There is a no part in here that s why I need to use similar part which one matches with my 90 Talon. I don t want to be stressed about finding part:) Postage cost is so high to Turkey and Dollar currencies is high also 1 dollar is 20 turkish...
thanks for this information we have 2.4 auto and 2.0 turbo engine models as you know Evo 8 engine...so if i find 2005 outlander calipers I don t have to buy bracket Am I right? sorry missunderstanding but I don t want my money to lose it for a trash:)
I just want to learn one thing.. for 294 rotors Should i buy MR307282 caliper bracket or it comes with 2005 outlander I don t have to buy MR307282. because 2.0 turbo AWD uses different brake system and 2.4 engine uses different brake system..I read this article before but it s not clear..
Hello everyone
I know there are a lot of information about brake upgrade I am from Turkey and Dollar currency is so high in here that's why I don't have second chance about buying new caliper:) I hope you understand me.Here is the first question.
I will do Outlander brake upgrade so I read...
Hello I have zt-2 zeitronix 2009 earlier model
I thought the model I had was a 4.9 supported controller, but I realized it was a 2009 and earlier controller. So the 4.9 lsu sockets did not fit the Zt-2. Do you think it will work if I change the pins of 4.9 to 4.2?
thanks
hi
The previous owner of my vehicle removed all the connections related to the air conditioner. I bought everything again with a great research, it almost cost a car money :) Because I had to bring the parts from USA because they were not in my country. Anyway, I'd like some help with the...
Hello
I am not at all satisfied with the acceleration of my vehicle. At full throttle, my car is hesitating and I smell gas but I can't understand where the gasoline smell is coming from. My car is idling very erratically. Can you make sense of the excel files I have attached? Information...
@steve I need your help about 1991 ecu on my 1990 I read a lot of article but I am confused if i swap the ecu's between them, Do i only swap pin 6 and 14 or Do i need swap also PTU or coil system? if i swap 91 ecu my cluster will not work out? rpms?